MDPE 8818 is a 1-hexene copolymer medium density resin. Exhibits good processability, excellent stress cracking resistance (ESCR), impact resistant and good performance at low temperatures. The long term hydrostatic strength (LTHS) at 20°C is greater than 8 MPa, classifies as PE80 according to ISO 9080. ASTM D3350 cell classification: 235473A. Standard designation code: PE2706 Main applications include pipes for water distribution, irrigation, effluents; ducts for telecommunications; geomembranes; telephone cable shells, drop wires.

DOW™ DPDA-3135 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding. It is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: DOW DPDA-3135 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles - Excellent impact strength, stress crack resistance and processability - Long term UV stabilization: UV-8 stabilizer package Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a - Canadian HPFB No Objection - Underwriters Laboratories Inc. - EU, 10/2011 - NSF International NSF/ANSI Std 61 (sec 4 & 5) Consult the regulations for complete details.

DOW™ DPDA-3152 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding. It is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: DOW DPDA-3152 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles - Excellent impact strength, stress crack resistance and processability - Long term UV stabilization: UV-8 stabilizer package Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a - Canadian HPFB No Objection - Underwriters Laboratories, Inc. - NSF International NSF/ANSI Std 61 (sec 4 & 5) Consult the regulations for complete details.

DOW™ DPDA-3170 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding and is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: DOW DPDA-3170 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles - Excellent impact strength, stress crack resistance and processability - Long term UV stabilization: UV-8 stabilizer package Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a - Canadian HPFB No Objection - Underwriters Laboratories Inc. - NSF International NSF/ANSI Std 61 (sec 4 & 5) - European Commission Regulation (EU) No 10/2011 Consult the regulations for complete details.

MPDE NG 6995 is a Medium Density Polyethylene Resin produced in the Gas Phase technology. It is designed for blown film applications providing good processability and seal properties. It offers good tear and impact resistance. Main Characteristics: - Monolayer and multilayer blown film - General purpose bags Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - European Commission Regulation (EU) No 10/2011 Consult the regulation for complete details.

DOW DMDA-8962 NT 7 Medium Density Polyethylene (MDPE) resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in thin-wall injection molding applications such as food containers, including freezer applications. This resin has been designed to provide a good impact/stiffness balance as well as excellent processability. Main Characteristics: - Injection molding resin - Good impact/stiffness balance for freezer applications - High flow for processing ease - Very narrow molecular weight distribution Complies with - U.S. FDA 21 CFR 177.1520(c)3.2a - CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - EU, No 10/2011 - Consult the regulations for complete details.

- High melt strength - Excellent low temperature toughness - Good environmental stress crack resistance - Excellent flex life Industrial Standards Compliance: - ASTM D 3350: cell classification PE224340A - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a. - Complies with Canadian HPFB No Objection (With Limitations) - Consult the regulations for complete details. DOW DNDA-1796 NT 7 Medium Density Polyethylene Resin is produced using UNIPOL™ process technology. It is intended for use in flexible hose and tube applications. It also has utility in certain sheet applications and blow molding applications such as small, squeezable bottles. It exhibits high melt strength, excellent low temperature toughness, good stress cracking resistance, and outstanding flex life. It has a high molecular weight and a relatively broad molecular weight distribution that provides an excellent balance of performance properties and processability.

- High melt strength - Excellent low temperature toughness Industrial Standards Compliance: - ASTM D 3350: cell classification PE224340A - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a. - Complies Europe Commission Regulation (EU) No 10/2011 (See NOTES) - Consult the regulations for complete details. DOW DNDA-7350 NT 7 Medium Density Polyethylene Resin is produced using UNIPOL™ process technology. It is intended for use in flexible hose and tube applications as well as blow molded articles. It exhibits high melt strength and excellent low temperature toughness.

DOW™ DPDA-3020 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOLTM Process Technology from Dow and is intended for use in a broad range of injection molding applications such as household or commercial trash bins, storage units (totes, bins and laundry baskets) and large carts. This resin has been designed to provide an excellent balance of toughness, tear resistance and processability. · Injection Molding · For injection molded household or commercial trash bins, storage units (totes, bins and baskets) and large carts · Excellent balance of toughness, tear resistance and processability Complies with: · U.S. FDA 21 CFR 177.1520 (c) 3.2a Consult the regulations for complete details

MDPE NG 7525 is a Medium Density Polyethylene Resin produced in the UNIPOL™ Process. This resin is recommended to be used in thin-wall micro-irrigation tape application and profile extrusion application. Resin exhibits good draw down characteristics producing tapes with a reliable balance of extrusion and stiffness. It can also be used as a component in mixtures with low density polyethylene resins and linear low density polyethylene resins, to modify and improve the mechanical properties. Outdoor applications require the addition of UV stabilizer to maintain the excellent properties over extended periods of UV exposure. Main Characteristics: - High performance in processability - Excellent mechanical properties - High ESCR - Excellent seal property in drippers - Complies with Regulation U.S. FDA 21 CFR 177.1520 (c) 3.2a - Complies with EU, No 10/2011 - Consult the regulation for complete details

XDPDA-3020 NT 7 Experimental Medium Density Polyethylene (MDPE) Resin is produced via UNIPOLTM Process Technology from Dow and is intended for use in a broad range of injection molding applications such as household or commercial trash bins, storage units (totes, bins and laundry baskets) and large carts. This resin has been designed to provide an excellent balance of toughness, tear resistance and processability. · Injection Molding · For injection molded household or commercial trash bins, storage units (totes, bins and baskets) and large carts · Excellent balance of toughness, tear resistance and processability Complies with: · U.S. FDA 21 CFR 177.1520 (c) 3.2a Consult the regulations for complete details