ICORENE® 1041 is a linear low density polyethylene specifically developed for rotational moulding. This grade is suitable for use in general purpose applications. It has a good balance of properties such as toughness, easy flow and stiffness.

ICORENE® 1050 is a high density polyethylene specifically developed for rotational moulding. This grade is a very fast processing material suitable for use in many different applications. It has a good balance of properties such as toughness and stiffness.

ICORENE® 1061 ESF WHITE 1001 is the "next generation" enhanced surface finish polyethylene, specifically developed for rotational moulding. This grade is designed to remove the surface pinholes during processing for applications such hygienic, medical, furniture and design applications. ICORENE® 1061 ESF WHITE 1001 is easy to process, has a good flow and good physical properties.

ICORENE® 1062 is the "next generation" enhanced surface finish polyethylene, specifically developed for rotational moulding. This grade is designed to remove the surface pinholes during processing for applications such hygienic, medical, furniture and design applications. ICORENE® 1062 ESF is easy to process, has a good flow and good physical properties.

ICORENE® 1210 is a hexene linear low density polyethylene specifically developed for use in rotational moulding. This grade is designed for applications requiring toughness and flexibility and is suitable for use in many applications such as marine buoys, street furniture, or intermediate bulk containers (IBCs).

ICORENE® 1314 is a high performance hexene high density polyethylene specifically developed for use in rotational moulding. This grade has been designed for applications requiring good stiffness and toughness. This material can be used in many different rotomoulding applications and for food contact applications. ICORENE® 1314 Black 9001 is TÜV approved, protocolnr 175XS0122-00. ICORENE® 1314 Natural and Black are DiBt approved Z40-25-519 and WRAS approved: 1507503 & 1202543

ICORENE® 1339 is a hexene high density polyethylene specifically developed for use in rotational moulding. This grade has been designed for applications requiring higher stiffness and toughness. ICORENE® 1339 is also available as a Black powder.

Icorene® 1380 is a hexene high density polyethylene specifically developed for use in rotational moulding. This grade has been designed for applications requiring good stiffness and toughness and can be used in many different rotomoulding, including food contact, applications. Icorene® 1380 Black 9001 is TUV ECE R34 approved, protocolnr: 185XS0206-00.

ICORENE® 1440 BLK9001 is a UV stabilised hexene high density black polyethylene specifically developed for use in rotational moulding. This grade is typically used by customers to manufacture large water, fuel or chemical tanks and also underground infrastructure parts. ICORENE® 1440 BLK9001 has good overall mouldability, extremely high ESCR and impact strength (especially at low temperatures). This grade is designed to have improved resistance against the harmful effect of biodiesel fuel. It is not intended for use in medical and pharmaceutical applications.

ICORENE® 1440 is a UV stabilised hexene high density polyethylene specifically developed for use in rotational moulding. This grade is typically used by customers to manufacture large water, fuel or chemical tanks and also underground infrastructure parts. ICORENE® 1440 has good overall mouldability, extremely high ESCR and impact strength (especially at low temperatures). This grade is designed to have improved resistance against the harmful effect of biodiesel fuel. It is not intended for use in medical and pharmaceutical applications.

ICORENE® 1460 Black 9001 is a UV stabilised hexene linear medium density polyethylene specifically developed for use in rotational moulding. This grade is popular for use in agriculture and chemical storage containers, technical parts and automotive parts. Additionally, this grade is particularly resistant against the harmful effect of biodiesel fuel. ICORENE® 1460 Black 9001 has good overall mouldability, extremely high ESCR and impact strength (especially at low temperatures). It is not intended for use in medical and pharmaceutical applications.

ICORENE® 1460 GRN 6908 is a hexene medium density polyethylene compound green colour specifically developed for use in rotational moulding. This grade is designed for use in agriculture and chemical storage containers, technical parts and automotive parts. Also this grade is resistant against the harmful effect of biodiesel fuel. ICORENE® 1460 GRN 6908 has good overall mouldability, extremely high ESCR and impact strength (especially at low temperatures).

ICORENE® 1460 GRY 7907 is a hexene medium density polyethylene compound grey colour specifically developed for use in rotational moulding. This grade is designed for use in agriculture and chemical storage containers, technical parts and automotive parts. Also this grade is resistant against the harmful effect of biodiesel fuel. ICORENE® 1460 GRY7907 has good overall mouldability, extremely high ESCR and impact strength (especially at low temperatures).

ICORENE® 1460 is a UV stabilised hexene linear medium density polyethylene specifically developed for use in rotational moulding. This grade is popular for use in agriculture and chemical storage containers, technical parts and automotive parts. Additionally, this grade is particularly resistant against the harmful effect of biodiesel fuel. ICORENE® 1460 has good overall mouldability, extremely high ESCR and impact strength (especially at low temperatures). It is not intended for use in medical and pharmaceutical applications.

ICORENE® 1490 BLK 9001 is a black UV stabilised hexene linear medium density polyethylene powder. It has been developed for use as a powder in rotational moulding. This grade is a very fast processing material but also has extremely high levels of ESCR and a very wide processing window for -40C ARM impact strength. Recommended PIAT can be as low as 130C to 150C depending on the position of the thermocouple. It is suitable for use in many different applications due to its high ESCR. But it is especially good for reducing oven cycle time by up to 30%. This is done using low PIATs and can result in significantly lower energy usage heating the oven. This effect is multiplied in thicker wall section. It is easy to process with a low shrinkage tendency. Faster melting can help to distribute the material more evenly across the mould. ICORENE® 1490 BLK 9001 is not intended for use in medical and pharmaceutical applications.

ICORENE® 1490 is a UV stabilised hexene linear medium density polyethylene powder. It has been developed for use as a powder in rotational moulding. This grade is a very fast processing material but also has extremely high levels of ESCR and a very wide processing window for -40C ARM impact strength. Recommended PIAT can be as low as 130C to 150C depending on the position of the thermocouple. It is suitable for use in many different applications due to its high ESCR. But it is especially good for reducing oven cycle time by up to 30%. This is done using low PIATs and can result in significantly lower energy usage heating the oven. This effect is multiplied in thicker wall section. It is easy to process with a low shrinkage tendency. Faster melting can help to distribute the material more evenly across the mould. ICORENE® 1490 is not intended for use in medical and pharmaceutical applications.

ICORENE® 1505 Black 9001 is a crosslinkable black high density polyethylene specifically developed for rotational moulding. This grade is particularly suitable for use in applications requiring exceptional impact resistance at low temperature, toughness and excellent ESCR such as fuel tanks. The original cross linking system used is low odor and allows a perfect moulding of the part free of pinholes. ICORENE® 1505 Black 9001 is TÜV approved, protocolnr 163XS0034-00.

ICORENE® 1505 is a crosslinkable natural high density polyethylene specifically developed for rotational moulding. This grade is particularly suitable for use in applications requiring exceptional impact resistance at low temperature. toughness and excellent ESCR such as fuel tanks. The specially developed cross linking system used has lower odor than typical materials of this type and allows for perfect moulding of the part - free of pinholes.

ICORENE® 1506 is a crosslinkable high density polyethylene specifically developed for rotational moulding. This grade is particularly suitable for use in applications requiring exceptional impact resistance at low temperature, toughness and excellent ESCR such as fuel tanks. The cross linking system used allows a wider processing windows and higher PIAT can be reached.

ICORENE® 1613 BK85 is a hexene linear medium density polyethylene specifically developed for use in rotational moulding. This grade is designed for applications requiring good processability, stiffness and toughness. This product is particularly suitable for the production of diesel fuel tanks. ICORENE® 1613 BK85 is TUV ECE R34 approved, protocolnr: 175XS0121-00. ICORENE® 1613 BK85 is WRAS approved:1810500.

ICORENE® 1613 is a hexene linear medium density polyethylene specifically developed for use in rotational moulding. This grade is designed for applications requiring good processability, stiffness and toughness. The constituents of this product are suitable for food contact applications. ICORENE® 1613 is TÜV approved, protocolnr 175XS0124-00.

ICORENE® 1614 is a hexene linear medium density polyethylene specifically developed for use in rotational molding. This grade is designed for applications requiring good processability, stiffness and toughness. This product is particularly suitable for the production of diesel fuel tanks. ICORENE® 1614 is TUV ECE R34 approved, protocol no: 185XS0148-00.

ICORENE® 1615 is a hexene linear medium density polyethylene specifically developed for use in rotational molding. This grade is designed for applications requiring good processability, stiffness and toughness. This product is particularly suitable for the production of diesel fuel tanks. ICORENE® 1615 is TUV ECE R34 approved, protocol no: 205XS0179-00.

ICORENE® 1741 BLACK 9001 is a metallocene high density polyethylene specifically developed for use in rotational moulding. This grade is designed for use in many different rotomoulding applications. It has good overall mouldability, high rigidity and very good toughness.

ICORENE® 1741 is a metallocene high density polyethylene specifically developed for use in rotational moulding. This grade is designed for use in many different rotomoulding applications. It has good overall mouldability, high rigidity and very good toughness.

ICORENE® 1761 BLACK 9001 is a metallocene linear low density polyethylene for rotational moulding applications. This grade is specifically developed for dieseltanks. It has a good balance of properties such as toughness, easy flow and high impact.

ICORENE® 1761 BLACK 9005 is a metallocene linear low density polyethylene for rotational moulding applications. This grade is specifically developed for dieseltanks. It has a good balance of properties such as toughness, easy flow and high impact.

ICORENE® 1761 is a metallocene linear low density polyethylene for rotational moulding applications. This grade is suitable for use in general purpose applications. It has a good balance of properties such as toughness, easy flow, high impact, and surface gloss.

ICORENE® 1762 V2 Black 9004 is the next generation metallocene linear low density polyethylene containing a halogen free flame retardant additive package for rotational moulding applications. This grade has been tested by Schulman R&D comply with the requirements to meet UL94 V2 at 3mm thickness.

ICORENE® 1762 V2 is based on a next generation metallocene linear medium density polyethylene containing a halogen free flame retardant additive package for rotational moulding applications. ICORENE® 1762 V2 is available in white, black and some colours. This grade has been tested to comply with the requirements to meet UL94 V2 at 3mm thickness.

ICORENE® 1869 is a self adhesive linear low density polyethylene powder specifically developed for rotational lining. This grade has been designed using a high performance additive package formulated to provide good bonding to metal surfaces during processing. ICORENE® 1869 is particularly suitable for bonding to steel surfaces. We recommend the use of a specific metal preparation process to ensure consistent and effective metal-to-polymer bonding. For processing advice please consult our process guide.

ICORENE® 1877 is a linear medium density polyethylene powder specifically developed for rotational moulding. This grade is suitable for use in general purpose applications. It has a good balance of properties such as toughness and stiffness.

ICORENE® 2550 is a linear low density polyethylene powder specifically developed for rotational moulding. This grade has been designed for applications requiring good processability, toughness and flexibility and is suitable in many different applications.

ICORENE® 2551 is a linear low density polyethylene powder specifically developed for rotational moulding. This grade has been designed for applications requiring good processability, toughness and flexibility and is suitable in many different applications.

ICORENE® 2900 is a linear low density polyethylene powder specifically developed for rotational moulding. This grade is particularly suitable for use in applications requiring a very flexible material.

ICORENE® 3150 is a linear low density polyethylene specifically developed for rotational moulding. This grade is a very fast processing material suitable for use in many different applications. It has a good balance of properties such as toughness, easy flow and stiffness.

ICORENE® 3545 is a linear low density polyethylene specifically developed for rotational moulding. This grade is suitable for use in general purpose applications. It has a good balance of properties such as toughness, easy flow and stiffness.