TIPELIN 1100J is a high density unimodal polyethylene copolymer (with propene-1 as comonomer) intended for injection moulding of general purpose products. It offers good balance of properties between stiffness and processability. The grade contains antioxidant and acid scavenger. TIPELIN 1100J is recommended for making daily necessaries, kitchen housewares, boxes, crates, trays, toys, caps, cartridges.

TIPELIN 1108J is a UV stabilized high density unimodal polyethylene copolymer intended for injection moulding of general purpose products. It offers good balance of properties between stiffness and processability. The grade contains UV stabilizer package, antioxidant and acid scavenger. TIPELIN 1108J is recommended for making daily necessaries, kitchen housewares, boxes, crates, trays, toys, caps, cartridges.

TIPELIN 3100J is a copolymer polyethylene (butene-1 comonomer) intended for injection moulding and compression moulding of products. It offers good organoleptic properties, environmental stress crack resistance and improved long-term color stability. The grade is slip agent free and contains antioxidant and acid scavenger. TIPELIN 3100J is recommended for caps and closures for carbonated soft drinks, beverage overcaps, engineering and technical parts.

TIPELIN 3110J is a copolymer polyethylene (butene-1 comonomer), intended for injection moulding and compression moulding of general pupose products. It offers good organoleptic properties, environmental stress crack resistance and improved long-term color stability. The grade contains antioxidant, acid scavenger and slip agent. TIPELIN 3110J is recommended for caps and closures for carbonated soft drinks, engineering and technical parts.

TIPELIN 5700S is a high density unimodal polyethylene comopolymer (with buthene-1 as comonomer) intended for fiber extrusion. It has medium molecular mass and a narrow molecular mass distribution. It offers high tensile strength, high elongation at break and low tendency to fibrillation. The grade contains antioxidant and acid scavenger. TIPELIN 5700S is recommended for making slit film and tapes, round bale nets and protective netting in agriculture and building industry. Recommended film thickness (Primer film) is 0.06 - 0.12 mm. Recommended film thickness (Fibre) is 0.018 - 0.025 mm.

TIPELIN 6000B is a high density bimodal polyethylene copolymer (with butene-1 as comonomer) intended for blow moulding of products with high stiffness and very good environmental stress crack resistance (ESCR). The grade contains antioxidant and acid scavenger. TIPELIN 6000B is recommended for thin walled, small bottles up to 5 litre capacity for consumer goods such as cosmetics, daily care etc. and for blow moulded products for packaging of aggressive industrial chemicals bounded to UN certificates. It is suitable for corrugated pipes too.

TIPELIN 6010B is a high density bimodal polyethylene copolymer (with butene-1 as comonomer) intended for blow moulding of products with high stiffness and very good environmental stress crack resistance (ESCR),full notched creep behavior and improved long-term color stability. The grade contains antioxidant and acid scavenger. TIPELIN 6010B is recommended for thin walled, small bottles up to 5 litre capacity for consumer goods such as cosmetics, daily care etc. and for blow moulded products for packaging of aggressive industrial chemicals bounded to UN certificates. Highly recommended for corrugated pipes too.

TIPELIN 6300B is a high density bimodal polyethylene copolymer (with butene-1 as comonomer) intended for blow moulding of products with high stiffness and excellent environmental stress crack resistance (ESCR). The grade contains antioxidant and acid scavenger. TIPELIN 6300B is recommended for bottles and containers up to 10 litre capacity for detergents, household chemicals and for blow moulded products for packaging of aggressive industrial chemicals bounded to UN certificates. It is suitable for corrugated pipes too.

TIPELIN 6301B is a high density bimodal polyethylene copolymer (with butene-1 as comonomer) intended for blow moulding of products with high stiffness, excellent environmental stress crack resistance (ESCR) and very good thermo-oxidative stability. The grade contains antioxidants and acid scavenger. TIPELIN 6301B is recommended for bottles and containers up to 10 litre capacity for detergents and household chemicals. It is suitable for corrugated pipes.

TIPELIN 7000F is a high density bimodal polyethylene copolymer (with butene-1 as comonomer) intended for blown film of products with excellent mechanical strength and good stiffness. It offers good processability at high speed. The grade contains antioxidant and acid scavenger. TIPELIN 7000F is recommended for disposal waste bags, grocery bags and ultra-thin films. Recommended film thickness is 0.006 to 0.06 mm.

TIPELIN 7100S is a high density bimodal polyethylene copolymer (with butene-1 as comonomer) intended for sheet extrusion and blow moulding of products with high stiffness, excellent environmental stress crack resistance, full notched creep behaviour. The grade contains antioxidants and acid scavengers. TIPELIN 7100S is recommended for the extrusion of sheets of industrial parts and for non-pressure pipe extrusion.

TIPELIN 7111S is a high density bimodal polyethylene copolymer (with butene-1 as comonomer) intended for sheet extrusion and blow moulding of products with high stiffness, excellent environmental stress crack resistance, full notched creep behavior and improved long-term color stability. The grade contains antioxidants and acid scavengers. TIPELIN 7111S is recommended for the extrusion of sheets of industrial parts and consumer packaging as well, highly recommended in cases when better colour stability and lower yellowness value of the product is needed. The product is also recommended for non-pressure pipe extrusion and for blow moulding of jerry cans for the packaging even of aggressive industrial

TIPELIN 7300B is a high density bimodal polyethylene copolymer (with butene-1 as comonomer) intended for blow moulding of products with high stiffness and excellent environmental stress crack resistance (ESCR). The grade contains antioxidant and acid scavenger. TIPELIN 7300B is recommended for blow moulding of jerry cans for packaging of aggressive industrial chemicals bounded to UN certificates. The grade is recommended for sheet extrusion as well. It is suitable for corrugated pipes too.

TIPELIN 7500F is a high density bimodal polyethylene copolymer (with butene-1 as comonomer) intended for blown film of products with excellent mechanical strength and good stiffness. It offers good processability at high speed. The grade contains antioxidant and acid scavenger. TIPELIN 7500F is recommended for disposal waste bags, grocery bags and ultra-thin films. Recommended film thickness is 0.006 to 0.06 mm.

TIPELIN 7700M is a natural, high density polyethylene copolymer (with butene-1 as comonomer) grade. The product shows excellent mechanical properties and environmental stress crack resistance (ESCR). The grade contains antioxidant and acid scavenger. TIPELIN 7700M is recommended for non-pressure pipes and sheet manufacturing.

TIPELIN BA 550-13 is a high density polyethylene copolymer (with hexen-1 as comonomer) grade for blow moulding of products which require good chemical resistance, furthermore high rigidity. The grade contains antioxidant and acid scavenger. TIPELIN BA 550-13 is recommended for bottles and cans up to 30 litre capacity for non-aggressive household chemicals, cosmetics and oils. The product is suitable for non-pressure pipes and corrugated pipes too.

TIPELIN BB 620-17 is a high density polyethylene copolymer (with hexen-1 as comonomer) grade for blow moulding of products which require high rigidity. The grade contains antioxidant. TIPELIN BB 620-17 is recommended for shrink films, multi-layer films and blend component for LDPE for applications where high stiffness is required. It can be used in the middle layer in a coex structure or blended with LDPE and LLDPE to increase stiffness and film strength. The product is also suitable for blow moulding of small size bottles. Furthermore, it is suitable for corrugated pipes too.

TIPELIN BS 501-17 is a high density polyethylene copolymer (with hexen-1 as comonomer) grade for blow moulding of products which require excellent ESCR and chemical resistance, furthermore balanced mechanical properties. The grade contains antioxidants. TIPELIN BS 501-17 is recommended for bottles and cans up to 10 litre capacity for aggressive household chemicals and detergents. It is suitable for corrugated pipes too.

TIPELIN BS 520-14 is a high density polyethylene copolymer (with hexen-1 as comonomer) grade for blow moulding of products, which require very high ESCR and chemical resistance. The grade contains antioxidants and acid scavenger. TIPELIN BS 520-14 is recommended for hollowed products of maximum 220 litres capacity for aggressive industrial chemicals and surface active substances, thermoforming of extruded sheets.

TIPELIN FA 381-10 is a film grade of medium density polyethylene copolymer (with hexen-1 as comonomer) grade. The product has very good Elmendorf tear strength and Dart drop resistance, low gel content and good vapour barrier capacity. The grade contains antioxidants and acid scavenger. TIPELIN FA 381-10 is recommended for bags, shopping bags, garbage bags, shrink films, multi-layer films and blend component for LDPE. Recommended film thickness is 0.015 to 0.06 mm.

TIPELIN FB 472-02 is a film grade of high density polyethylene copolymer (with hexen-1 as comonomer) grade. The product has high molecular mass, very good Tear strength and Dart drop resistance, low gel content, good vapour barrier properties. The grade contains antioxidants and acid scavenger. TIPELIN FB 472-02 is recommended for films, bags, shopping bags, garbage bags and blend component for LDPE in shrink films. Recommended film thickness is 0.015 to 0.06 mm.

TIPELIN FS 340-03 is a film grade of medium density polyethylene copolymer (with hexen-1 as comonomer) that has very good Elmendorf Tear Resistance and excellent Dart Drop Resistance. The grade contains antioxidants and acid scavenger. TIPELIN FS 340-03 is recommended for bags, shopping bags, garbage bags, shrink films, multi-layer films and blend component for LDPE. Recommended film thickness is 0.015 to 0.06 mm.

TIPELIN FS 383-03 is a film grade of medium density polyethylene copolymer (with hexene-1 as comonomer) grade. The product has very good Elmendorf tear strength and Dart drop resistance. The grade contains antioxidants and acid scavenger. TIPELIN FS 383-03 is recommended for bags, shopping bags, garbage bags, shrink films, multi-layer films and blend component for LDPE. Recommended film thickness is 0.015 to 0.06 mm.

TIPELIN FS 471-02 is a film grade of high density polyethylene copolymer (with hexen-1 as comonomer) grade. The product has high molecular mass, very good Tear strength and Dart drop resistance, low gel content, good vapour barrier properties. The grade contains antioxidants and acid scavenger. TIPELIN FS 471-02 is recommended for extra thin packaging films, bags, shopping bags and garbage bags. Recommended film thickness is 0.008 to 0.06 mm.