The most signicant features of the 600S series are the improved heat stability and that the material enables an easy and secure pigmenting for the customer. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. Compounds in the 600S series are available in hardness from 25 Shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

Dryflex A thermoplastic elastomer (TPE) bondable grades, primarily based on SBS and SEBS, increase freedom of design and open up a vast range of application opportunities. It used to be a complex and costly affair producing details made of thermoplastics that showed soft-touch qualities or had integrated seals. With Dryflex A TPEs, since the materials are bonded together at the production stage, no separate primer or adhesive is needed. This makes the process faster and more cost-effective than if the two parts were assembled together after each had been produced separately, or bonded mechanically, which often requires some modification to the design. Primarily a TPE is used as the soft component. Dryflex A bondable grades can be co-extruded or overmoulded with a variety of engineering plastics. Dryflex A grades are available in black or natural and can easily be coloured. These thermoplastic elastomers form excellent bonds onto PP, PE, PA, ABS, PC, PS, PMMA, ASA, SAN and their blends. Polyamides and ABS may be either reinforced or non-reinforced yet still bond extremely well to Dryflex. It is easy to achieve excellent bonding to PP, even using standard TPE materials, while other thermoplastics require some modification of the TPE material to optimise bonding.

The most signicant features of the 600S series are the improved heat stability and that the material enables an easy and secure pigmenting for the customer. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. Compounds in the 600S series are available in hardness from 25 Shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The most signicant features of the 600S series are the improved heat stability and that the material enables an easy and secure pigmenting for the customer. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. Compounds in the 600S series are available in hardness from 25 Shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The most signicant features of the 600S series are the improved heat stability and that the material enables an easy and secure pigmenting for the customer. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. Compounds in the 600S series are available in hardness from 25 Shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The most signicant features of the 600S series are the improved heat stability and that the material enables an easy and secure pigmenting for the customer. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. Compounds in the 600S series are available in hardness from 25 Shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The most signicant features of the 600S series are the improved heat stability and that the material enables an easy and secure pigmenting for the customer. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. Compounds in the 600S series are available in hardness from 25 Shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications. Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future. We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry. Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.

Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications. Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future. We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry. Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.

Dryflex 652800: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 80 Shore A Service Temperature Range: -50 to +150°C (Unstressed Material). Colour: Black, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone-/UV- Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Appr. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Special Features: This material has improved properties at high temperatures.

Dryflex 660201: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 20 Shore A Service Temperature Range: -50 to +125°C (Unstressed Material). Colour: Natural, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone-/UV- Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Appr. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

Dryflex 660400S: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 40 Shore A Service Temperature Range: -50 to +125°C (Unstressed Material). Colour: Natural, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone-/UV- Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Appr. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications. Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future. We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry. Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

Dryflex 662750S: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 75 Shore A Service Temperature Range: -50 to +125°C (Unstressed Material). Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone-/UV- Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Appr. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.

Dryflex 670271: Thermoplastic Elastomer Material Type: TPS-SEBS Hardness: 27 Shore 00 Service Temperature Range: -50 -- +70°C (unstressed material) Colour: Natural, but can be available in any colour. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recyclability: 100% recyclable

Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications. Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future. We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry. Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.