Radel® polyphenylsulfone is an amorphous thermoplastic material that offers exceptional hydrolytic stability, and toughness superior to other commercially available, high-temperature flims. PPSU films have high deflection temperatures and outstanding resistance to environmental stress cracking. The polymer is inherently flame retardant. The excellent thermal stability makes films suitable for applications where very low shrink at high temperatures are needed. PPSU films also have good electrical properties. Radel® film is off-white in color.

Extrusion, Injection Molding, Thermoforming Grade, Transparent-Slight Amber Tint, Excellent Impact Resistance, Exceptional Long Term Hydrolytic Stability and Resistance to Environmental Stress Cracking, Better Chemical Resistance Than PSU or PEI, Inherently Flame Retardant, Maximum Temperature of Use 375 °F, Withstands Repeated Steam Sterilizations, NC900 = To Be Assigned 5 Digit Number Indicating Natural, Black, or Custom Color. The ENV72 Series Products Are Available With Mold Release and/or UV Stabilizer. Formerly known as ENVIROLEX™ ENV72-NC900

Ceramer and Ceramerplus are high performance polymers and additives based on polyphenylene sulfone (PPSO2). Ceramer and Ceramerplus have excellent thermal stability, inherent flame resistance and universal chemical resistance.

PPSU-H200 is a standard flow injection molding grade of polyphenylsulfone (PPSU) with high heat resistance and toughness.

PPSU-1000RX is a high flow injection molding grade of polyphenylsulfone (PPSU) with high heat resistance and toughness. It is suitable for healthcare applications and sterilizable by EtO and steam.

PPSU-2000RX is a high flow injection molding grade of polyphenylsulfone (PPSU) with excellent hydrolytic stability and toughness. It is suitable for healthcare applications and sterilizable by EtO and steam.

PPSU-H200 is a standard flow injection molding grade of polyphenylsulfone (PPSU) with high heat resistance and toughness. It is suitable for healthcare applications and sterilizable by EtO and steam.

DURASON PPSU2000H is a middle viscosity PPSU. It offers excellent impact, chemical resistance, hydrolysis resistance, transparency, creep resistance, and is inherently flame retardant. It is available in AMR, EUR, and APAC. It is available in natural, black, and colors.

DURASON PSU 1700 is a high strength polysulfone (PSU). It is resistant to hydrolysis, oxidation, and prolonged exposure to high temperature environments. It is available in natural, black, and colors. This grade is available in AMR, EUR, and APAC.

DURASON PSU2000 is a middle viscosity Polysulfone (PSU). It is suitable for injection molding or extrusion. This material offers a great balance of translucency, chemical resistance, temperature resistance, and steam resistance. It is available in natural, black, and colors. This grade is available in AMR, EUR, and APAC.

Glass Filled PPSU Features: - Excellent Chemical Resistance - Low Density - Good Dimensional Stability - Excellent Processability Applications: - Gears and Bearings - Small Appliances - Industrial

ESD Protection - Electrically Conductive

This data represents typical values that have been calculated from all products classified as: Generic PPSU - Glass Fiber This information is provided for comparative purposes only.

This data represents typical values that have been calculated from all products classified as: Generic PPSU This information is provided for comparative purposes only.

PSUM94063

InLube PPSUCF10TF5SI2 is a 10% carbon fiber reinforced PPSU with 5% PTFE and silicone. InLube PPSUCF10TF5SI2 offers high operating temperatures, good chemical compatibility, excellent hydrolysis resistance, good dimensional stability, and favorable mechanical properties.

InLube PPSUGF10TF5SI2 is a 10% glass fiber reinforced PPSU with 5% PTFE and silicone. InLube PPSUGF10TF5SI2 offers high operating temperatures, good chemical compatibility, excellent hydrolysis resistance, good dimensional stability, and favorable mechanical properties.

InLube PPSUGF10TF8SI2 is a 10% glass fiber reinforced PPSU with 8% PTFE and silicone. InLube PPSUGF10TF8SI2 offers high operating temperatures, good chemical compatibility, excellent hydrolysis resistance, good dimensional stability, and favorable mechanical properties.

InLube PPSUTF8SI2 is a regular flow PPSU with 8% PTFE and silicone. InLube PPSUTF8SI2 offers high operating temperatures, good chemical compatibility, excellent hydrolysis resistance, good dimensional stability, and favorable mechanical properties.

InStruc PPSUCF10 is a 10% carbon fiber reinforced PPSU..InStruc PPSUCF10 offers high operating temperatures, good chemical compatibility, excellent hydrolysis resistance, good dimensional stability, and favorable mechanical properties.

InStruc PPSUCF5 is a 5% carbon fiber reinforced PPSU..InStruc PPSUCF5 offers high operating temperatures, good chemical compatibility, excellent hydrolysis resistance, good dimensional stability, and favorable mechanical properties.

10% GLASS FIBER REINFORCED POLYPHENYLSULFONE

15% GLASS FIBER REINFORCED POLYPHENYLSULFONE

20% GLASS FIBER REINFORCED POLYPHENYLSULFONE

20% GLASS FIBER REINFORCED, HIGH FLOW PPSU

Polyphenylene Sulphone (PPSU) based compound. Glass fibres. Low smoke density and low toxicity index. Very high dimensional stability.

Polyphenylene Sulphone (PPSU) based compound. Glass fibres. Low smoke density and low toxicity index. Very high dimensional stability.

Polyphenylene Sulphone (PPSU). Unfilled. Low smoke density and low toxicity index. Very high dimensional stability.