InPacto® D/NL type 100D/NL, 200D/NL and 300D/NL, is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 100D/NL can be expanded in conventional continuous pre-expanders using steam/air mixtures for good control of the density as well as batch expanders. The typical density range is 70 to 100 kg/m3 but other densities are possible depending on applications and equipment. The beads have been specially developed for use with high speed dry moulding equipment to produce drinking cups, bowls and containers, with wall thicknesses from 0.8 to 5.0 mm and trays (e.g. seedling trays), however can also be moulded with conventional wet moulding equipment.

InPacto® D/NL type 100D/NL, 200D/NL and 300D/NL, is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 200D/NL can be expanded in conventional continuous pre-expanders using steam/air mixtures for good control of the density as well as batch expanders. The typical density range is 50 to 100 kg/m3 but other densities are possible depending on applications and equipment. The beads have been specially developed for use with high speed dry moulding equipment to produce drinking cups, bowls and containers, with wall thicknesses from 1.2 to 5.0 mm and trays (e.g. seedling trays), however can also be moulded with conventional wet moulding equipment.

InPacto® D/NL type 100D/NL, 200D/NL and 300D/NL, is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 300D/NL can be expanded in conventional continuous pre-expanders using steam/air mixtures for good control of the density as well as batch expanders. The typical density range is 25 to 100 kg/m3 but other densities are possible depending on applications and equipment. The beads have been specially developed for use with high speed dry moulding equipment to produce trays (e.g. seedling trays) and containers (e.g. ice cream containers), with wall thicknesses from 2.5 to 8.0 mm, however can also be moulded with conventional wet moulding equipment.

InPacto® S/F1 type 300S/F1, 500S/F1, 800S/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 300S/F1 can be molded on shape molding equipment. It can be used for producing thin wall, high strength contour moldings, with wall thickness <10mm, at high and medium density, for packaging or construction products, with excellent fusion at short molding cycle times or conditioning time. Pre-expanded foam make them readily mixable with clay, plaster or concrete. The product is approved for direct contact with food.

InPacto® SR/F1 type 300SR/F1, 500SR/F1, 800SR/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain low level of hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 300SR/F1 is generally molded on shape molding equipment. Owing to its reduced pentane level, it is particularly suited to shape molded packaging, in particular at higher densities and wall thickness <10mm, where very short cycle times or very short conditioning times are required. The product is approved for direct contact with food.

InPacto® S/F1 type 300S/F1, 500S/F1, 800S/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 500S/F1 can be molded on both shape and block molding equipment. It can be used for medium and high density, high strength moldings with excellent fusion at short molding cycle times or conditioning time. Also medium and high density blocks, which can be cut to make insulation or packaging. The product is approved for direct contact with food.

InPacto® SR/F1 type 300SR/F1, 500SR/F1, 800SR/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain low level of hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 500SR/F1 can be molded on both shape and block molding equipment’s. Owing to its reduced pentane level, it is particularly suited to shape molded packaging (e.g. home appliance packaging) > 10mm or high density, high quality blocks where very short cycle times or very short conditioning times are required. The product is approved for direct contact with food.

InPacto® S/F1 type 300S/F1, 500S/F1, 800S/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 800S/F1 can be molded on both shape and block molding equipment. It can be used for medium and high density blocks, which can be cut to make insulation or packaging. It may be used for large contour moldings. The product is approved for direct contact with food.

InPacto® SR/F1 type 300SR/F1, 500SR/F1, 800SR/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain low level of hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 800SR/F1 can be molded on both shape and block molding equipment. Owing to its reduced pentane level, it is particularly suited for high density, high quality blocks where very short cycles time or very short conditioning time are required. It may also be used for large contour moldings. The product is approved for direct contact with food.