Polystyrène (PS) by Trinseo
Produit | Disponibilité | Description du produit |
---|---|---|
STYRON A-TECH™ 1110 | Asie Pacifique |
STYRON A-TECH™ 1110 advanced technology polystyrene resin is a high-gloss, high-impact resin for injection molding applications.
Main Characteristics:
- Excellent toughness
- High gloss
Applications:
- Small appliances
- Toys
- Printers
- Remote controls
Complies with:
- U.S. FDA 21 CFR 177.1640
- Consult the regulation for complete details.
|
STYRON A-TECH™ 1173 | Asie Pacifique |
STYRON A-TECH™ 1173 advanced technology polystyrene resin is a high impact, environmental stress crack resistant (ESCR) resin for extrusion thermoforming applications. The improved rigidity of this resin allows potential down-gauging and scrap reduction, as well as overall improvements in process efficiency.
Main Characteristics:
- Easy processing
- Outstanding thermoformability
- Good practical toughness
- ESCR performance
Complies with:
- U.S. FDA 21 CFR 177.1640
- Consult the regulation for complete details.
Applications:
- Large appliance/refrigerator liners
- Other deep draw extrusion thermoforming applications
|
STYRON A-TECH™ 1175 | Asie Pacifique |
La résine polystyrène haute technologie STYRON A-TECH™ 1175 est une résine hautement résistante aux chocs et à la fissuration sous contrainte environnementale (ESCR) conçue pour les applications d'extrusion et de thermoformage, notamment dans l’industrie de la réfrigération. Basée sur une technologie brevetée de Styron, cette résine permet de réduire potentiellement l'épaisseur du produit fini et la quantité de déchets produits lors des procédures de thermoformage grâce à l'association de propriétés telles que la résistance à la fissuration sous contrainte, la rigidité et les caractéristiques de thermoformage.
Caractéristiques principales :
- Permet de réduire l’épaisseur du produit fini
- Résistance à la fissuration sous contrainte pour les produits alimentaires et les hydrocarbures
- Facilité de mise en œuvre en extrusion et thermoformage
- Excellent comportement au cours du thermoformage
- Rigidité accrue
Applications :
- Gros électroménager / revêtements intérieurs de réfrigérateurs
- Applications d’extrusion / de thermoformage classiques nécessitant une résistance élevée à la fissuration sous contrainte
Conforme à :
- La Directive de l'Union Européenne 2002 / 72 / CE
- La norme FDA, 21 CFR 177.1640
- Consulter la réglementation pour des détails complets.
|
STYRON A-TECH™ 1180 | Asie Pacifique |
STYRON A-TECH™ 1180 advanced technology polystyrene resin is a high-impact resin with a unique combination of high gloss, high heat, excellent stiffness and good practical toughness. It is designed for injection molding applications.
Main Characteristics:
- High gloss
- High heat
- High stiffness
- Good practical toughness
Applications:
- Air-conditioner
- Refrigerator accessories
Complies with:
- U.S. FDA 21 CFR 177.1640
- Consult the regulation for complete details.
|
STYRON A-TECH™ 1200 | Europe |
STYRON A-TECH™ 1200 est un polystyrène choc élaboré en fonction d'une technologie breveté par Styron. La plate-forme technologique de STYRON A-TECH permet d'éliminer les compromis typiques entre les propriétés clefs des résines polystyrene choc, y compris leur résistance mécanique, leur brillant, leur rigidité et leur processabilité.
Principales caractéristiques :
- Combinaison unique de résistance mécanique et de rigidité
- Transformation facile du produit
- Excellent comportement au niveau de la thermoformabilité
- Bonne aptitude au mélange avec les polystyrènes à usage général
- Possibilité de réduire l’épaisseur des parois
Applications :
- Feuilles pour formage-remplissage-scellage
- Pots préformés
- Gobelets pour distributeurs automatiques
Conforme à :
- la Directive Européenne 2002/72/EC
- la norme U.S. FDA 21 CFR 177.1640
Consulter les réglementations pour plus de détails.
|
STYRON A-TECH™ 1210 | Europe |
STYRON A-TECH™ 1210 is a newly developed high impact polystyrene (HIPS) resin based on patented technology, offering a unique combination of processability, stiffness, toughness, low gloss and surface smoothness.
Main Characteristics:
- Low gloss and smooth sheet surface
- Ease of processing
- Excellent thermoforming behaviour
- Good blendability with GPPS
Applications:
- Form Fill Seal (FFS) dairy packaging
- Medical device packaging
- Signage sheet
- Sheet applications requiring matt and smooth surface
Complies with:
- Europe Regulation (EC) 10/2011
- U.S. FDA 21 CFR 177.1640
- Consult the regulations for complete details.
|
STYRON A-TECH™ 1300 | Asie Pacifique |
STYRON A-TECH™ 1300 advanced technology polystyrene resin is a high impact polystyrene resin offering excellent toughness and strength with good processability.
Main Characteristics:
- Excellent toughness
- High strength
- Easy processing
- Gas-assist molding
- High heat
Applications:
- TV
- Printers
- Audio enclosures
- Small appliances
Complies with:
- U.S. FDA 21 CFR 177.1640
- Consult the regulation for complete details.
|
STYRON X-TECH™ 2175 | Europe |
STYRON X-TECH™ 2175 is an environmental stress crack resistant (ESCR) HIPS resin especially developed for thermoforming and extrusion, especially for the refrigeration industry, the production of inner liners for fridges and freezers. Based on patented Trinseo technology, this resin allows potentially 5 % down gauging of the average sheet extrusion thickness for thermoforming of the inner liners, through its unique combination of ESCR, rigidity and melt strength.
Main Characteristics
- Allows for downgauging
- ESCR to food stuff and hydrocarbons
- Ease of processing in extrusion and thermoforming
- Excellent thermoforming behaviour
- Increased rigidity
Applications
- Large appliances / refrigeration liners
- General extrusion/thermoforming applications requiring ESCR
Complies with
- Europe Regulation (EC) 10/2011
- FDA, 21 CFR 177.1640
- Consult the regulations for complete details.
|
STYRON X-TECH™ 4660 | Europe |
STYRON X-TECH™ 4660 is a modified general-purpose polystyrene developed for XPS insulation board production based on new and patented PS chemistry. In combination with the active ingredient in masterbatch XZ82347.00 this product will develop a unique molecular structure with leads to exceptional melt strength and will result in superior property balance in XPS insulation board and outstanding extrudability.
Benefits:
- Heat resistance
- High toughness
- Easy flow
Applications:
- Foam extrusion
|
STYRON™ 2678 MED | Asie Pacifique |
STYRON™ 2678 MED is a general purpose polystyrene with high flow and good toughness, designed for injection molding applications. It is compliant with ISO 10993 (biological Evaluation of Medical Devices) and is suitable for use in approved medical applications.
Applications:
- Injection moulded medical applications (such as device enclosures, packaging items, etc.)
- Thin-walled containers
Complies with:
- ISO 10993
- Europe EU-Directive 2002/72/EC by Europe REGULATION (EC) 10/2011
- U.S. FDA 21 CFR 177.1640
- Consult the regulations for complete details.
|
STYRON™ 2686 MED | Europe |
STYRON™ 2686 MED is a general purpose resin with medium flow and good toughness, designed for injection moulding and extrusion applications. It has been tested according to ISO 10993 (biological Evaluation of Medical Devices) and is suitable for use in approved medical applications.
Applications:
- Injection moulded applications
- Thin wall containers
Complies with:
- Commission Regulation (EU) No 10/2011 and its amendments
- U.S. FDA 21 CFR 177.1640
Consult the regulations for complete details.
|
STYRON™ 438 | Asie Pacifique |
STYRON™ 438 is a high-impact polystyrene resin with good flow, excellent stiffness, high heat and impact resistance. It is designed for injection molding applications.
Main Characteristics:
- High heat
- Good balance of toughness and stiffness
Complies with:
- U.S. FDA 21 CFR 177.1640
- Consult the regulations for complete details.
Applications:
- Printers
- Food containers
- Household goods
|
STYRON™ 470 | Asie Pacifique |
STYRON™ 470 is a high-impact polystyrene resin with an excellent balance of toughness, stiffness, flow and heat resistance. It is suitable for both injection molding and extrusion applications.
Main Characteristics:
- Good practical toughness
- Easy processing
Complies with:
- U.S. FDA 21 CFR 177.1640
- Consult the regulations for complete details.
Applications:
- Audio enslosures
- Media enclosures
- Toys
- Food containers
|
STYRON™ 485 | Europe |
STYRON™ 485 est un polystyrène choc qui se caractérise par une bonne fluidité, une grande résistance à l'impact et une bonne élasticité. Il est conçu pour le moulage par injection et l'extrusion. Il peut être utilisé seul ou en mélange avec un polystyrène cristal.
Applications :
- Emballages.
- Articles industriels
Conforme à :
- la Directive Européenne 2002/72/EC
- la norme U.S. FDA 21 CFR 177.1640L11
Consulter les réglementations pour plus de détails.
|
STYRON™ 486M | Asie Pacifique |
STYRON™ 486M is a high-impact polystyrene resin with an excellent balance of toughness, stiffness, flow and heat resistance. It is suitable for both injection molding and extrusion applications.
Main Characteristics:
- Good practical toughness
- Easy processing
Complied with:
- U.S. FDA 21 CFR 177.1640
- Europe REGULATION (EC)10/2011
- Consult the regulation for complete details.
Applications:
- Audio enclosures
- Small appliances
- Media enclosures
- Toys
- Food containers
|
STYRON™ 634 | Europe |
STYRON™ 634 est un polystyrène cristal alliant des caractéristiques parfaitement adaptées. Il peut être utilisé seul ou mélangé avec un polystyrène choc à la fois pour l'extrusion et le moulage par injection.
Applications:
- Boîtes de pétri
- Articles ménagers
- Emballage
Conforme à :
- la Directive Européenne UE 2002/72/EC
- la norme U.S. FDA 21 CFR 177.1640
Consulter les réglementations pour plus de détails.
|
STYRON™ 636 BT | Europe |
STYRON™ 636 BT is a general purpose polystyrene with a specific Blue Tone color designed for injection molded appliance applications. It is a high molecular weight material suitable for extrusion blending with high impact polystyrene. Its high strength makes it ideally suited for packaging applications and refrigerator accessories.
Applications:
- Injection molded appliance accessories and containers with a light blue tint
- Packaging foam extrusion
- Thermoformed containers blended with HIPS
Complies with:
- Europe REGULATION (EC)10/2011
- U.S. FDA 21 CFR 177.1640
- Consult the regulations for complete details.
|
STYRON™ 637 | Europe |
STYRON™ 637 est un polystyrène cristal conçu pour être mélangé avec un polystyrène choc où ses caractéristiques de haute résistance mécanique peuvent être exploitées au maximum. Il s'agit d'une résine de haut poids moléculaire et conçue pour l' extrusion. Sa haute résistance le rend idéalement adapté pour les applications d'emballage.
Applications :
- Emballages produit par extrusion-thermoformage
- Emballages fait de feuille allégée
- Contenants moulés par injection
Conforme à :
- la Directive Européenne 2002/72/EC
- la norme U.S. FDA 21 CFR 177.1640
Consulter les réglementations pour plus de détails.
|
STYRON™ 641 | Europe |
STYRON™ 641 is a high melt flow rate general purpose resin specifically developed for extruded polystyrene (XPS) foam applications.
Main Characteristics
- High melt flow rate
- Excellent foamability
Applications:
- Foam boards
|
STYRON™ 650 HF | Europe |
STYRON™ 650 HF is a high melt flow rate general purpose resin specifically developed for medium to thick XPS board applications. It offers a unique balance of melt tension, processability and foaming behavior. Its high MFR also makes it very suitable for high dosing compounding applications.
Main Characteristics
- Very high melt flow rate
- Excellent foamability
Applications:
- Foam sheet
- Masterbatch production
|
STYRON™ 656D | Asie Pacifique |
STYRON™ 656D is a general purpose polystyrene with easy flow and good clarity. It is reocmmended for applications where a specific balance of flow and strength are important.
Applications:
- Media enclosures
- Disposable cups
- Blending with HIPS
Complies with:
- U.S. FDA 21 CFR 177.1640
- Europe REGULATION (EC) 10/2011
- Consult the regulation for complete details.
|
STYRON™ 660 | Europe |
STYRON™ 660 est un polystyrène cristral conçu à la fois pour des applications de moulage et d'extrusion. L'équilibre entre sa résistance thermique, sa résistance mécanique et sa fluidité est exceptionnel.
Applications :
- Extrusion de mousse
|
STYRON™ 666H | Asie Pacifique |
STYRON™ 666H is a general purpose polystyrene with easy flow and good clarity. It is recommended for applications where a specific balance of flow and strength are important.
Applications:
- Media enclosures
- Disposable cups
- Blending with HIPS
Complies with:
- U.S. FDA 21 CFR 177.1640
- Consult the regulation for complete details.
|
STYRON™ 678E | Europe |
STYRON™ 678E est un polystyrène cristal d'une haute fluidité et bonne tenacité. Il est conçu pour le moulage par injection et pour l'extrusion. Il peut être utilisé soit à l'état pur ou mélangé avec un polystyrène choc.
Applications :
- Récipients à parois minces
- Coextrusion pour feuille laitière
Conformes à :
- la Directive Européenne 2002/72/EC
- la norme U.S. FDA 21 CFR 177.1640
Consulter les réglementations pour plus de détails.
|
STYRON™ 685D | Asie Pacifique |
STYRON™ 685D is a high heat resistance, high tensile strength and high stiffness, general purpose polystyrene. It is recommended for applications where tensile and melt strength as well as heat resistance properties are important.
Characteristics
- High heat
Applications
- Media enclosures
- Refrigerator accessories
- Oriented polystyrene sheets
Complies with
- U.S. FDA 21 CFR 177.1640
- Europe REGULATION (EC) 10/2011
- CAN. HPB NO OBJECTION (WITH LIMITATIONS)
- CSA (Canada Standards Association)
- Consult Regulations for details.
|
STYRON™ 685F | Asie Pacifique |
STYRON™ 685F is a general purpose polystyrene resin with high heat resistance, high stiffness and strength. It is recommended for both extrusion and injection molding applications.
Main Characteristics:
- High heat
Applications:
- Foam sheet
- Household ware
Complies with
- U.S. FDA 21 CFR 177.1640
- Consult Regulations for details.
|
STYRON™ 686E | Europe |
STYRON™ 686E est un polystyrène cristal conçu à la fois pour le moulage par injection et l'extrusion. L'équilibre entre sa résistance thermique, sa résistance mécanique et sa fluidité est exceptionnel. Il possède aussi une excellente transparence de bonnes caractéristiques de stabilité dimensionnelle.
Applications :
- Feuilles de polystyrène expansé pour l'emballage, ex. œufriers
- Emballages alimentaires à parois minces
- Articles moulés par injection avec parois d'epaisseur moyen et élevé
Conformes à :
- la Directive Européenne 2002/72/EC
- la norme U.S. FDA 21 CFR 177.1640
Consulter les réglementations pour plus de détails.
|
STYRON™ CO2RE™ 1110BIO80 | Asie Pacifique |
STYRON™ CO2RE™ 1110BIO80 HIPS is credited with 80% of ISCC+ bio-based feedstocks through mass balance certification. STYRON™ CO2RE™ 1110 advanced technology polystyrene resin is a high-gloss, high-impact resin for injection molding applications.
Main Characteristics:
- Excellent toughness
- High gloss
Applications:
- Small appliances
- Toys
- Printers
- Remote controls
Complies with:
- U.S. FDA 21 CFR 177.1640
- Consult the regulation for complete details.
|
STYRON™ CO2RE™ 1173BIO85 | Asie Pacifique |
STYRON™ CO2RE™ 1173BIO85 HIPS is credited with 85% of ISCC+ bio-based feedstocks through mass balance certification. STYRON™ CO2RE™ 1173BIO85 advanced technology polystyrene resin is a high impact, environmental stress crack resistant (ESCR) resin for extrusion thermoforming applications. The improved rigidity of this resin allows potential down-gauging and scrap reduction, as well as overall improvements in process efficiency.
Main Characteristics:
- Easy processing
- Outstanding thermoformability
- Good practical toughness
- ESCR performance
Complies with:
- U.S. FDA 21 CFR 177.1640
- Consult the regulation for complete details.
Applications:
- Large appliance/refrigerator liners
- Other deep draw extrusion thermoforming applications
|
STYRON™ CO2RE™ 1175BIO85 | Asie Pacifique |
STYRON™ CO2RE™ 1175BIO85 HIPS is credited with 85% of ISCC+ bio-based feedstocks through mass balance certification. STYRON™ CO2RE™ 1175BIO85 advanced technology polystyrene is a high impact, environmental stress crack resistant (ESCR) resin, designed for extrusion and thermoforming applications, especially for the refrigeration industry. Based on patented technology, this resin allows for potential downgauging and scrap reduction in the thermoforming process through its combination of properties like ESCR, rigidity and thermoforming.
Applications:
- Large Appliance / Refrigeration liners
- General extrusion / thermoforming applications requiring ESCR
Complies with:
- Europe REGULATION (EC) 10/2011
- FDA, 21 CFR 177.1640
- Consult the regulations for complete details.
|
STYRON™ CO2RE™ 1180BIO85 | Asie Pacifique |
STYRON™ CO2RE™ 1180BIO85 is credited with 85% of ISCC+ bio-based feedstocks through mass balance certification. STYRON™ CO2RE™ 1180BIO85 advanced technology polystyrene is a high-impact resin with a unique combination of high gloss, high heat, excellent stiffness and good practical toughness. It is designed for injection molding applications.
Applications:
- Air-conditioners
- Refrigerator accessories
Complies with:
- U.S. FDA 21 CFR 177.1640
- Consult the regulation for complete details.
|
STYRON™ CO2RE™ 1300BIO85 | Asie Pacifique |
STYRON™ CO2RE™ 1300BIO85 HIPS is credited with 85% of ISCC+ bio-based feedstocks through mass balance certification. STYRON™ CO2RE™ 1300BIO85 advanced technology polystyrene is a high impact polystyrene resin offering excellent toughness and strength with good processability.
Applications:
- TV enclosures
- Printers
- Audio enclosures
- Small appliances
Complies with:
- U.S. FDA 21 CFR 177.1640
- Consult the regulation for complete details.
|
STYRON™ CO2RE™ 438BIO85 | Asie Pacifique |
STYRON™ CO2RE™ 438BIO85 HIPS is credited with 85% of ISCC+ bio-based feedstocks through mass balance certification. STYRON™ CO2RE™ 438BIO85 is a high-impact polystyrene resin with good flow, excellent stiffness, high heat and impact resistance. It is designed for injection molding applications.
Main Characteristics:
- High heat
- Good balance of toughness and stiffness
Complies with:
- U.S. FDA 21 CFR 177.1640
- Consult the regulations for complete details.
Applications:
- Printers
- Food containers
- Household goods
|
STYRON™ CO2RE™ 470BIO85 | Asie Pacifique |
STYRON™ CO2RE™ 470BIO85 HIPS is credited with 85% of ISCC+ bio-based feedstocks through mass balance certification.. STYRON™ CO2RE™ 470BIO85 is a high-impact polystyrene resin with an excellent balance of toughness, stiffness, flow and heat resistance. It is suitable for both injection molding and extrusion applications.
Main Characteristics:
- Good practical toughness
- Easy processing
Complies with:
- U.S. FDA 21 CFR 177.1640
- Consult the regulations for complete details.
Applications:
- Audio enslosures
- Media enclosures
- Toys
- Food containers
|
STYRON™ CO2RE™ 666HBIO95 | Asie Pacifique |
STYRON™ CO2RE™ 666HBIO95 GPPS is credited with 95% of ISCC+ bio-based feedstocks through mass balance certification. It is a general purpose polystyrene with easy flow and good clarity. It is recommended for applications where a specific balance of flow and strength is important.
Applications:
- Media enclosures
- Disposable cups
- Blending with HIPS
Complies with:
- U.S. FDA 21 CFR 177.1640
- Consult the regulation for complete details
|
STYRON™ CO2RE™ 676DI30 | Europe |
STYRON™ CO2RE™ 676DI30 is a general purpose polystyrene containing 30% recycled polystyrene. It has a high flow and good toughness. It is designed for injection molding, cap coating and for use either pure or in a mixture with other easy flowing high impact polymers in injection molding applications. STYRON™ CO2RE™ 676DI30 GPPS has a lower carbon footprint than virgin polystyrene.
Applications:
- Thin-walled containers
- Coextrusion cap coating
|
STYRON™ CO2RE™ 685DBIO95 | Asie Pacifique |
STYRON™ CO2RE™ 685DBIO95 GPPS is credited with 95% of ISCC+ bio-based feedstocks through mass balance certification. It is a general purpose polystyrene with high heat resistance, high tensile strength and high stiffness. It is recommended for applications where tensile and melt strength as well as heat resistance properties are required.
Applications
- Media enclosures
- Refrigerator accessories
- Oriented polystyrene sheets
Complies with
- U.S. FDA 21 CFR 177.1640
- Europe REGULATION (EC) 10/2011
- CAN. HPB NO OBJECTION (WITH LIMITATIONS)
- CSA (Canada Standards Association)
- Consult Regulations for details.
|
STYRON™ CO2RE™ 687DI30 | Europe |
STYRON™ CO2RE™ 687DI30 is a general purpose polystyrene resin containing 30% recycled polystyrene. It is designed for both moulding and extrusion applications. The balance between heat resistance, toughness and flow is exceptional. It also has good dimensional stability and good clarity. STYRON™ CO2RE™ 687DI30 has a lower carbon footprint than virgin polystyrene.
Applications:
- Foamed PS sheets
- Thin wall packages
- Medium and heavy section applications in injection moulding
|
STYRON™ CO2RE™ 688DI30 | Europe |
STYRON™ CO2RE™ 688DI30 is a general purpose polystyrene resin containing 30% recycled polystyrene. It is designed for both moulding and extrusion applications. The balance between heat resistance, toughness and flow is exceptional. It also has good dimensional stability STYRON™ CO2RE™ 688DI30 has a lower carbon footprint than virgin polystyrene.
Applications:
- Foamed PS sheets
- Thin wall packages
- Medium and heavy section applications in injection moulding
|
STYRON™ C-TECH | Europe |
STYRON C-TECH™ is a specialty medium impact polystyrene resin that offers excellent gloss. Upon orientation it develops good transparency. Typical uses include blending with GPPS for the production of transparent thermoformed cups, impact modifier for the production of OPS sheet or gloss cap layer for coextruded sheet structures.
Main Characteristics:
- High clarity and good mechanical properties after orientation (e.g. thermoforming)
- Excellent gloss
- High heat resistance
- High Flow
- Easy processing
Applications:
- Transparent thermoformed food containers
- Impact modifier for Oriented Polystyrene (OPS) sheet
- Gloss cap layer for coextruded structures
Complies with:
- Europe Regulation (EC) 10/2011
- U.S. FDA 21 CFR 177.1640
- Consult the regulations for complete details.
|