ADVANCENE™ bEE-4906-AAH is a thermally stabilized bimodal high molecular weight high density polethylene - hexene copolymer, produced using advanced gas phase PE process in a single reactor. It is intended for use in PE-100 pipe applications where the highest standards of long term hydrostatic strength and resistance to slow crack growth are esired. These high performance pipes can be used at higher pipeline operating pressures and have a potential to down-gauge. ADVANCENE™ bEE-4906-AAH has good processability with a high specific output (kg/hr/rpm), exceptional melt strength with very Low Sag, and good fusion compatibility. It is very suitable for large diameter and thick wall pipe but also for small diameter pipes. Main Characteristics: - Natural gas distribution pipes (ISO 4437). - Large diameter industrial piping. - Mining. sewage. and municipal water service lines (ISO 12201, ISO 4427). Complies with: - ISO 12162: PE-1DD. - Russia: Gost 18599 and Gost1 6388. - Australia, New Zealand: All NZS 4130.

ADVANCENE™ bEE-4909-AAH is a bimodal high molecular weight high density ethylene-hexene copolymer, produced using Advanced Gas phase PE Process in a single reactor. Its high molecular weight, bimodal molecular weight distribution and optimum density results in films with high strength, high rigidity and excellent processability. Tubular films of ADVANCENE™ bEE-4909-AAH resin are recommended for high strength grocery sacks, shopping bags and other thin film applications. The combination of strength, toughness and drawdown makes this resin ideal for downgauging in many applications. Films are readily treated and printed to give high-quality graphics. ADVANCENE™ bEE-4909-AAH resin is compatible with color concentrates, thus permitting the production of a variety of colored films that serve as protective and attractive decorative wraps. Main Charactenstlcs: - Hexene High Density Resin. - Bimodal Molecular weight distribution. - High film strength. - Excellent processability and drawdown.

ADVANCENE™ EE-1801-AAB is a part of an LLDPE series offering excellent drawdown and puncture resistance combined with high gloss and clarity. They are also frequently used as a blend partner with LDPE resins to improve film properties and processability. Several additive packages are available according to the required surface properties. Applications: - Multilayer Packaging Film. - Packaging Films. - Produce Bags. - Refuse Bags. - Shoppers. - Stand Up Pouches. - Trash Bags - Garment Film. - General Packaging. - Heavy Duty Bags. - Ice Bags. - Industrial Liners. - Industrial Packaging. - Lamination Film. - Liners. - Agricultural Film. - Bag in Box. - Barrier Food Packaging. - Blown Film. - Bread Bags. - Food Packaging. - Form Fill and Seal Packaging. - Freezer Film.

ADVANCENE™ EE-1801-AAH is a Linear Low Density Polyethylene Resin is an ethylene-hexene copolymer, linear low density (LLDPE) resin designed for good strength and process ability. This product is recommended for general-purpose packaging applications from thick gauge, heavy-duty bags to high-speed thin gauge applications. Applications: - Hexene Linear Low Density Resin - General Purpose Resin - Excellent Strength

ADVANCENE™ EE-1801-BSB is a part of an LLDPE series offering excellent drawdown and puncture resistance combined with high gloss and clarity. They are also frequently used as a blend partner with LDPE resins to improve film properties and processability. Several additive packages are available according to the required surface properties. Applications: - Multilayer Packaging Film. - Packaging Films. - Produce Bags. - Refuse Bags. - Shoppers. - Stand Up Pouches. - Trash Bags - Garment Film. - General Packaging. - Heavy Duty Bags. - Ice Bags. - Industrial Liners. - Industrial Packaging. - Lamination Film. - Liners. - Agricultural Film. - Bag in Box. - Barrier Food Packaging. - Blown Film. - Bread Bags. - Food Packaging. - Form Fill and Seal Packaging. - Freezer Film.

ADVANCENE™ EE-1802-AAB is a part of a Butene LLDPE series designed for the Blown & Cast film process, offering high gloss and excellent draw down. Films made from ADVANCENE™ EE-1802-AAB resin have very good tensile and toughness properties. Applications: - Agricultural Film. - Bag in Box. - Cast Film. - Blown Film. - Bread Bags. - Food Packaging. - Form Fill and Seal Packaging. - Freezer Film. - Garment Film. - General Packaging. - Industrial Packaging. - Institutional Can Liners. - Lamination Film. - Liners. - Mulch Films. - Multilayer Packaging Film. - Packaging Films. - Personal Care. - Produce Bags on a Roll. - Shoppers. - Trash Can Liners.

ADVANCENE™ EE-1802-AAH is a Linear Low Density Polyethylene Resin is an ethylene-hexene-1 copolymer designed for cast stretch film applications such as industrial pallet wrap. Films containing EE-1802- AAH offer outstanding toughness and load holding properties. Applications: - Industrial pallet wrap stretch film applications - Premium film packaging applications

ADVANCENE™ EE-1802-BSB is a part of a Butene LLDPE series designed for the Blown & Cast film process, offering high gloss and excellent draw down. Films made from ADVANCENE™ EE-1802-BSB resin have very good tensile and toughness properties. Applications: - Agricultural Film. - Bag in Box. - Cast Film. - Blown Film. - Bread Bags. - Food Packaging. - Form Fill and Seal Packaging. - Freezer Film. - Garment Film. - General Packaging. - Industrial Packaging. - Institutional Can Liners. - Lamination Film. - Liners. - Mulch Films. - Multilayer Packaging Film. - Packaging Films. - Personal Care. - Produce Bags on a Roll. - Shoppers. - Trash Can Liners.

This high molecular weight hexene copolymer provides: - Excellent overall balance of Processability, Toughness and Strength. - Good impact strength and tear properties. Applications: - General purpose thin film, trash bags, merchant bags. - Blending partner. - Produce bags. - Shopping bags.

ADVANCENE™ EE-3916-AAH is a hexene based medium density polyethylene classified as (PE80), material with an optimum balance between flexibility and strength, produced with advanced gas phase PE process. Long-term stability is ensured by an optimized stabilization system. Characteristics: ADVANCENE™ EE-3916-AAH is recommended for pressure pipe systems in the applications field of drinking water, natural gas, pressure sewerage, relining, sea outfall and industrial, where flexibility and coil ability is of importance. It also shows excellent resistance to rapid crack propagation and slow crack growth. Thanks to the structure, which gives outstanding extruability.

ADVANCENE™ EE-4811-AAH High Density Polyethylene Resin is a high molecular weight, high-density polyethylene copolymer that has been designed specically for tubular film extrusion. Its broad molecular weight distribution and density successfully combine excellent performance at high extrusion rates with high film strength and rigidity. Tubular films of ADVANCENE™ EE-4811-AAH Resin are recommended for high strength grocery sacks. shopping bags and notion and millinery bags. The excellent drawdown characteristic of this product permits production of high-quality thin films for multiwall sack liners and replacements for thin paper products. The combination of strength and drawdown makes this resin ideal for downgauging in many applications. Films are readily treated and printed to give high-quality graphics. ADVANCENE™ EE-4011-AAH Resin is compatible with color concentrates, thus permitting the production of a variety of colored films that serve as protective and attractive decorative wraps. Main Characteristics: - Hexene High Density Resin. - High film strength. - Excellent processability and drawdown.

ADVANCENE™ EE-5001-AAH is a medium molecular weight extrusion grade of high density polyethylene with hexene co-monomer. Applications: - Primary applications for monofilament are fish netting, rope and fruit and vegetable packaging.

ADVANCENE™ EM-3405-UVH Medium Density Polyethylene (MDPE) resin is a hexene copolymer with narrow molecular weight distribution and produced using advanced gas phase PE process. This resin is intended for use in rotational molding applications such as chemical tanks, storage containers and general UV stabilized rotomolding applications. Main Characteristics : - Rotomolding. - Narrow molecular weight distribution.

ADVANCENE™ EM-4810-AAH HDPE Resin is a polymer with broad molecular weight distribution and high molecular weight. This product provides an excellent combination of extrudability and parison stability, which contribute to uniform wall thickness in large parts. ADVANCENE™ EM-4810-AAH HDPE Resin is ideal for blow molding containers of > 80 liters closed head shipping containers and other similar pans. The broad distribution also provides outstanding environmental stress crack resistance (ESCR) at a good rigidity. Because of these characteristics, a wide variety of products, such as industrial chemicals, latex paints, printing inks, foodstuffs, adhesives and other chemical specialties may be packaged in containers produced from this resin. The smooth surface of molded parts is readily treated and printed for high quality applications. Main Characteristics: - Outstanding environmental stress crack resistance. - Excellent parison melt strength/low sag. - Good extrudability/processability. - Good rigidty.

ADVANCENE™ EM-4925-AAH HDPE Resin is specifically designed for use in either intermittent or continuous blow molding equipment to produce containers up to 30 liters in size - applications that require the combination of outstanding environmental stress crack resistance (ESCR) and high impact strength. ADVANCENE™ EM-4925-AAH HDPE Resin is also considered a multipurpose blow molding resin designed for the high speed production of blow molded containers used for packaging household industrial chemicals (e.g. detergents, bleach, fabric softeners), toiletries and cosmetics (e.g., shampoos, creams, lotions, etc.) health and medical aids. In addition, it can be blow molded into other thin-walled parts and houseware items, and can also be extruded into profiles or sheets. Main Characteristics - Outstanding environmental stress crack resistance. - High impact strength. - Good extrusion characteristics.

ADVANCENE™ EM-5204-UVH High Density Polyethylene (HDPE) Resin is produced via advanced gas phase PE process and is intended for use in injection molding applications such as caps & closures, pails, industrial parts and other shipping containers. This resin has been designed to provide excellent processability for molders and to meet the rigorous performance characteristics of applications requiring stackability, environmental stress crack resistance and impact strength. This resin is also suitable for cast flm extrusion processing. Main Characteristics: - For injection molded pails, industrial parts and other shipping containers. - For cast film extrusion. - Hexene High Density Resin. - Excellent impact strength, stress crack resistance and processability. - Very narrow molecular weight distribution.

ADVANCENE™ EM-5333-AAH HDPE Resin is a multipurpose polymer designed for high speed production of blow molded containers used to package household industrial chemicals (e.g detergents, bleach, fabric softeners), toiletries and cosmetics (e.g shampoos, creams, lotions, etc.), health and medical aids, and food products. In addition, it can be blow molded into other thin-walled parts and houseware items, and can be extruded into profiles. Main Characteristics: - Excellent environmental stress crack resistance and rigidity. - High impact strength. - Moderate swell. - High melt strength.