Commercial: Active

E41938 - CELANESE INTERNATIONAL CORP

Télécharger le document

Africa & Middle East, Asia Pacific, Europe, Latin America, North America

ASTM D4066 PA0181

• Isothermal Stress vs. Strain (ISO 11403)
• Secant Modulus vs. Strain (ISO 11403)
• Tensile Modulus vs. Temperature, Dynamic (ISO 11403)

Additive, RoHS Compliance, Part Marking Code, Resin ID, Density, Molding Shrinkage, Water Absorption 24h/23C, Water Absorption Sat/23C, Water Absorption 23C/50RH, Viscosity Number, Tensile Modulus, Tensile Stress at Yield, Tensile Stress, Tensile Strain at Yield, Tensile Strain at Break, Nominal Tensile Strain at Break, Flexural Modulus, Flexural Stress, Poisson's Ratio, Tensile Strain at Yield, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Notched Izod Impact Strength, Rockwell Hardness, Ball Indentation Hardness, DTUL (0.45 MPa) Unannealed, DTUL (1.80 MPa) Unannealed, Glass Transition Temperature, Melting Temperature, Coefficient of Linear Thermal Expansion, Flow, Coefficient of Linear Thermal Expansion, Transverse, Surface Resistivity, Volume Resistivity, Electric Strength, Relative Permittivity, Dissipation Factor, Comparative Tracking Index, Burning Rate, Flame Rating, Flammability Classification, Glow Wire Flammability Index, Glow Wire Ignition Temperature, Ejection Temperature, Additional Properties, Drying Temperature, Drying Time, Suggested Max Moisture, Processing (Melt) Temp, Mold Temperature, Holding Pressure, Drying Temperature, Drying Time, Suggested Max Moisture, Melt Temperature