La resina bimodal de polietileno CONTINUUM™ DGDA-2420 NT se produce mediante la tecnología de proceso UNIPOL™ II. Este producto se formula con un estabilizador de rayos ultravioleta para el almacenamiento al aire libre. Este producto puede utilizarse en aplicaciones de tubería en las que se desea una resistencia hidrostática a largo plazo en combinación con una extraordinaria resistencia a la lenta formación de fisuras y a la rápida propagación de fisuras. Entre las aplicaciones adecuadas están las tuberías de distribución de gas natural, irrigación y tubos de riego por goteo. Cumplimiento de normas industriales: ASTM D 3350: clasificación de celda PE277370D Grado de tubería ISO PE 80 Grado de tubería ASTM PE 2708 - HDB de 1250psi a 22,7°C, HDS de 800psi a 22,7°C y HDB de 1000psi a 60°C Consultar las normas reguladoras para ver todos los detalles.

CONTINUUM™ DGDA-2420 YL2 Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product is formulated with UV stabilizers for outdoor storage. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes. Industrial Standards Compliance: - ASTM D 3350: cell classification: -- Natural - PE277370D -- Yellow - PE277373E (Note A) - NSF International: Standard 14 - Canadian Standards Association (CSA): B137.4 - PE2708 PLUS - Plastics Pipe Institute (PPI): -- ASTM PE 2708 pipe grade - 1250 psi HDB at 73°F, 800 psi HDS at 73°F, and 1000 psi HDB at 140°F NOTES: (A) The first 5 numbers of the cell classification are based on natural resin. The last number and letter are based on yellow resin. (natural resin plus 2.0% DFDA 0022 YL2).

Industrial Standards Compliance: - ASTM D 3350: cell classification PE435440A CONTINUUM DGDA-2488 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. It is specifically designed for use in all duct and cable in conduit (CIC) applications for both telecommunications and power cables. Typical uses include high performance conduit for fiber optic networks and 5G expansion. The natural resin combined with color concentrate can be readily processed by any current duct or conduit extrusion method in all sizes at commercial rates.

La Resina de Polietileno Bimodal CONTINUUM™ DGDA-2490 BK GL es producida a partir del uso de la tecnología de procesos UNIPOL™ II. Este producto se puede utilizar para aplicaciones de tubos, donde se desea combinar resistencia hidrostática a largo plazo con una excelente resistencia a fin de demorar la aparición de grietas y la rápida propagación de las mismas. Las aplicaciones aptas incluyen tubos de distribución de gas natural, tuberías industriales, líneas para minería, sistemas de cloacas, servicios de aguas municipales. Cumplimiento con Normas de la Industria: - Norma ISO -- MRS 10 / 20°C, PE100 listada por Exova -- CRS 10 (20°C, 100 años); CRS 8 (40°C, 90 años); CRS 6.3 (60°C, 11 años); CRS 11.2 (14°C, 50 años)

La resina de polietileno bimodal CONTINUUM™ DGDA-2490 BK se produce mediante la tecnología de proceso UNIPOL™ II. Este producto puede utilizarse en aplicaciones de tubería en las que se desea una resistencia hidrostática a largo plazo en combinación con una extraordinaria resistencia a la lenta formación de fisuras y a la rápida propagación de fisuras. Entre las aplicaciones adecuadas están las tuberías de distribución de gas natural, tuberías industriales, minería, alcantarillados y tuberías de servicios de aguas municipales. Cumplimiento de normas industriales: ASTM D 3350: clasificación de celda Negro - PE445576C (MRS) (Ver NOTAS 1) Negro - PE445574C (HDB) (Ver NOTAS 1) Instituto de Tuberías de Plástico (PPI): TR-4 Tubería negra - CONTINUUM™ DGDA-2490 BK (Ver NOTAS 1) Grado de tubería ISO PE100 - CRS 10 a 20°C; MRS 10 a 20°C, 100 años; CRS 8 a 40°C, 90 años; CRS 6,3 a 60°C, 11 años; CRS 11,2 a 14°C, 50 años Grado de tubería ASTM PE4710 - HDB de 1600psi y HDS de 1000psi a 22,7°C y HDB de 1000psi a 60°C NSF International: Normas 14 y 61 Tubería negra - DGDA-2490 Negro 100 (Ver NOTAS 1) Consultar las normas reguladoras para ver todos los detalles. NOTAS: (1) Resina natural extruida en condiciones apropiadas con masterbatch negro de carbono DFNF-0092 (6,5%).

CONTINUUM™ DGDA-2490 BL Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include municipal water service lines, industrial piping, mining and sewage. Industrial Standards Compliance: - ASTM D 3350: cell classification -- Natural - PE445574A CC2 -- Blue - PE445574E CC3 (See Notes A) - Plastics Pipe Institute (PPI): TR-4 -- Natural Pipe - CONTINUUM™ DGDA 2490 NT -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F -- Blue Pipe - CONTINUUM™ DGDA 2490 BL (See Notes B) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 Consult the regulations for complete details. NOTES (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on blue resin (natural resin plus 2% DFDB-0027 BL2). (B) Natural resin extruded under proper conditions with 2.0% blue masterbatch DFDB-0027 BL2

La resina bimodal de polietileno CONTINUUM DGDA-2490 NT se produce mediante la tecnología de proceso UNIPOL™ II. Este producto puede utilizarse en aplicaciones de tubería en las que se desea una resistencia hidrostática a largo plazo en combinación con una extraordinaria resistencia a la lenta formación de fisuras y a la rápida propagación de fisuras. Entre las aplicaciones adecuadas están las tuberías de distribución de gas natural, tuberías industriales, minería, alcantarillados y tuberías de servicios de aguas municipales. Cumplimiento de normas industriales: ASTM D 3350: clasificación de celda Natural - PE445576A (MRS) Negro - PE445576C (MRS) (Ver NOTAS 1) Natural - PE445574A (HDB) Negro - PE445574C (HDB) (Ver NOTAS 1) Instituto de Tuberías de Plástico (PPI): TR-4 Tubería natural - CONTINUUM DGDA-2490 NT Grado de tubería ASTM PE4710 - HDB de 1600psi y HDS de 1000psi a 22,7°C Tubería negra - CONTINUUM DGDA-2490 BK (Ver NOTAS 1) Grado de tubería ISO PE100 - MRS 10 a 20°C; CRS 10 a 20°C, 100 años; CRS 8 a 40°C, 90 años; CRS 6,3 a 60°C, 11 años; CRS 11,2 a 14°C, 50 años Grado de tubería ASTM PE4710 - HDB de 1600psi y HDS de 1000psi a 22,7°C y HDB de 1000psi a 60°C NSF International: Normas 14 y 61 Tubería natural - DGDA-2490 NT Tubería negra - DGDA-2490 Negro (Ver NOTAS 1) U.S. FDA 21 CFR 177.1520(c)3.2a Consultar las normas reguladoras para ver todos los detalles. NOTAS: (1) Los cinco primeros números de la clasificación de celda se basan en la resina natural. El último número y la letra se basan en la resina negra (resina natural más 6,5% de DFNF-0092 negro).

CONTINUUM™ DGDA-2490 WH Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include municipal water service lines, industrial piping, mining and sewage. Industrial Standards Compliance: - ASTM D 3350: cell classification -- Natural — PE445574A CC2 -- White - PE445574E CC0 (See Note A) - Plastics Pipe Institute (PPI): TR-4 -- Natural Pipe — CONTINUUM™ DGDA 2490 NT -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F -- White Pipe — CONTINUUM™ DGDA 2490 WH (See Note B) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 Consult the regulations for complete details. NOTES (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on white resin (natural resin plus 2% DFDA-0027 WH 2). (B) Natural resin extruded under proper conditions with 2.0% white masterbatch DFDA-0027 WH2

Cumplimiento de normas industriales: ASTM D 3350: clasificación de celda - Negra: PE445576C (MRS) (ver las NOTAS 1) - Negra: PE445574C (HDB) (ver las NOTAS 1) Plastics Pipe Institute (PPI): TR-4 - Tubería negra - CONTINUUM™ DGDA-2492 BK (ver las NOTAS 2) -- ISO PE100 grado tubería - MRS 10 a 20 °C; CRS 6,3 a 60 °C, 11 años -- ASTM PE4710 grado tubería – 1600 psi HDB a 73 °F, 1000 psi HDB a 140 °F National Sanitation Foundation (NSF): normas 14 y 61 - Tubería negra - DGDA-2492 (ver las NOTAS 2) ASME - Code Case N755 Consulte las regulaciones para detalles completos La resina de polietileno bimodal CONTINUUM™ DGDA-2492 BK se fabrica con la tecnología de procesamiento UNIPOL™ II. Este producto puede utilizarse para aquellas aplicaciones de tubería en las cuales se deseen una resistencia hidrostática a largo plazo sumada a una resistencia excepcional a la propagación de fisuras lenta y rápida, así como una alta resistencia de fundido. Algunas aplicaciones adecuadas son tuberías de distribución de gas natural, tuberías industriales de gran diámetro, minería, alcantarillado y redes de abastecimiento de agua municipales. NOTAS: (1) Los cinco primeros números de la clasificación de celda están basados en la resina natural. El número y la letra de la última posición están basados en la resina negra (resina natural más 6,5% DFNF-0092). (2) Resina natural extruida en condiciones adecuadas con masterbatch negro de carbono DFNF-0092 (6,5%).

CONTINUUM™ DGDA-2492 NT N Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include water pipes at nuclear power facilities, natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A - Black - PE445574C CC2 (See NOTES) Plastics Pipe Institute (PPI): TR-4: - Black Pipe - CONTINUUM™ DGDA-2492N BK -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F National Sanitation Foundation (NSF): Standard 14 and 61 - Black PE4710 Pipe - CONTINUUM DGDA-2492 Consult the regulations for complete details. NOTES: Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDA-2492 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445576A CC0(MRS) - Black - PE445576C CC2 (MRS) (See NOTES A) - Natural - PE445574A CC0(HDB) - Black - PE445574C CC2 (HDB) (See NOTES A) Plastics Pipe Institute (PPI): TR-4: - Black Pipe - CONTINUUM™ DGDA-2492 BK (See NOTES A) -- ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 6.3 @ 60°C, 11 yr -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - DGDA-2492 Black (See NOTES B) Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDA-2502 BK es una resina Bimodal de Polietileno producida con Tecnología de Proceso UNIPOL™ II . Puede ser usada para aplicaciones de tuberías donde se desea una resistencia hidrostática a largo plazo combinada con una excelente resistencia al crecimiento lento de grietas y alta resistencia de fundido. Las aplicaciones adecuadas incluyen tuberías industriales de gran diámetro, minería, drenaje y líneas de suministro de agua municipal. DGDA-2502 BK tiene una procesabilidad excelente en todo el rango de tamaño de tubería y espesores de pared. Cumple con los Estándares Industriales: ASTM D 3350: Clasificación de celda - Natural - PE445574A CC0 - Negro - PE445574C CC2 (ver notas A y B) Plastics Pipe Institute (PPI): TR-4 - Tubería natural - CONTINUUM™ DGDA-2502 NT -- ASTM PE4710 grado tubería - 1600 psi HDB,1000 psi HDS @ 73°F, y 1000 psi HDB @ 140°F - Tubería negra - CONTINUUM DGDA-2502 BK (ver notas 1 & 2) -- ISO PE100 Grado de Tuberías - MRS 10 @ 20° C -- ASTM PE4710 Grado de Tubería - 1600 psi HDB, 1000 psi HDS @ 73°F, y 1000psi HDB @ 140°F NSF International : Standard 14 & 61 - Tubería Natural - DGDA-2502 NT - Tubería Negra - DGDA-2502 BK (ver notas A y B). Consulte las regulaciones para mayor información. Notas: (A)Los primeros cinco números de la clasificación de celda están basados en resina natural. El ultimo numero y letra están basados en la resina negra (resina natural más 6.5% DFNF-0092). (B)Resina natural extruida bajo condiciones adecuadas con masterbatch de carbón negro DFNF-0092 (6.5%).

Industrial Standards Compliance: - ASTM D 3350: cell classification - Black - PE445576C - Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDB-2490 BK 100 (See NOTES A) - ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 10 @ 20°C, 100 yr; CRS 8 @ 40°C, 90 yr; MRS 6.3 @ 60°C, 11 yr - ASTM PE4710 pipe grade - 1600psi HDB @ 73°F and 1000psi HDB @ 140°F - National Sanitation Foundation (NSF): Standard 14 and 61 - Black Pipe - DGDB-2490 (See NOTES A) - Standard 14 and 61. - Consult the regulations for complete details. CONTINUUM™ DGDB-2490 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445576A - Black - PE445576C (See NOTES A & B) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDB-2490 BK 100 (See NOTES B) - ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 10 @ 20°C, 100 yr; CRS 8 @ 40°C, 90 yr; CRS 6.3 @ 60°C, 11 yr - ASTM PE4710 pipe grade - 1600psi HDB and 1000 psi HDS @ 73°F and 1000psi HDB @ 140°F National Sanitation Foundation (NSF): Standard 14 and 61 - Black Pipe - DGDB-2490 (See NOTES B) Consult the regulations for complete details. CONTINUUM™ DGDB-2490 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDC-2480 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: - ASTM D 3350: cell classification -- Black - PE445574C CC2 (See NOTES A) - Plastics Pipe Institute (PPI): TR-4 -- Black Pipe - CONTINUUM™ DGDC-2480 BK Bimodal Polyethylene Resin (See NOTES A) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 -- Black Pipe - DGDC-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK).

CONTINUUM™ DGDC-2480 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A - Black - PE445574C (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Natural Pipe - CONTINUUM™ DGDC-2480 NT - Black Pipe - CONTINUUM DGDC-2480 BK (See NOTES A) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Natural Pipe - DGDC-2480 NT - Black Pipe - DGDC-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092).

CONTINUUM™ DGDC-2490 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Black Resin - PE445574C CC3 (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDC-2490 BK (See NOTES A) - ASTM PE4710 pipe grade -- 1600 psi HDB and 1000 psi HDS @ 73°F -- 1000 psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - CONTINUUM DGDC-2490 BK (See NOTES A) - CSA B137.1 PE4710 PLUS and B137.4 PE4710 PLUS Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDC-2492 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural Resin - PE445574A CC3 - Black Resin - PE445574C CC3 (See NOTES A) Plastics Pipe Institute (PPI): TR-4: - Black Pipe - CONTINUUM™ DGDC-2492 BK (See NOTES A) - ASTM PE4710 pipe grade -- 1600psi HDB and 1000psi HDS @ 73°F -- 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - CONTINUUM™ DGDC-2492 Black (See NOTES B) Canadian Standards Association (CSA) - Black Pipe - B137.1 PE4710 PLUS - Black Pipe - B137.4 PE4710 PLUS Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDC-2502 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, chlorinated water and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. DGDC-2502 NT has excellent processability for the full range of pipes sizes and wall thicknesses to include heavy wall pipe. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A CC3 - Black - PE445574C CC3 (see Notes A and B) - Plastics Pipe Institute (PPI): TR-4Natural Pipe - CONTINUUM DGDC-2502 NT ASTM PE4710 pipe grade - 1600 psi HDB and 1000 psi HDS @ 73°F, and 1000 psi HDB @ 140°F - Black Pipe - CONTINUUM DGDC-2502 BK (see Note A & B)ASTM PE4710 pipe grade - 1600 psi HDB and 1000 psi HDS @ 73°F, and 1000 psi HDB @ 140°F - ISO PE100 pipe grade - MRS 10 @ 20° C - NSF International: Standard 14 and 61 - Natural Pipe - DGDC-2502 NT - Black Pipe - DGDC-2502 BK (see Note A & B) Consult the regulations for complete details. Notes: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK). (B) Natural resin extruded under proper conditions with 6.5% carbon black masterbatch DFNF-0092 BK.

CONTINUUM™ DGDD-2480 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance ASTM D 3350: cell classification - Black - PE445574 CC0 (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDD-2480 BK (See NOTES A) - ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - DGDD-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDD-2480 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance - ASTM D 3350: cell classification -- Natural - PE445574A -- Black - PE445574C (See NOTES A) - Plastics Pipe Institute (PPI): TR-4 -- Black Pipe - CONTINUUM DGDD-2480 BK (See NOTES A) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 -- Black Pipe - DGDD-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DMDA-1260 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in compression and injection molded beverage closures designed primarily for applications that undergo hot fill or aseptic sterilization processes. CONTINUUM™ DMDA-1260 offers improved performance for injection molded fitments designed for fitted pouches where its balance of properties are desired. CONTINUUM™ DMDA-1260 delivers a combination of improved properties such as improved stiffness, higher heat deflection temperature, improved ESCR, and easy processing versus alternative HDPE systems typically used for hot fill and aseptic sterilization processes. The end results are longer term closure performance, easy opening closures without the use of slip agent and consistent processing. Main Characteristics: - Excellent Stiffness, ESCR, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - High Heat Deflection Temperature - Controlled Sensory Properties Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 - U.S. USP CLASS VI Consult the regulations for complete details.

CONTINUUM™ DMDC-1250 NT 7 Resina de Polietileno de Alta Densidad (HDPE) se utiliza tanto en aplicaciones moldeadas de cierre por inyección como por compresión incluyendo tapas para bebidas carbonatadas y cierres para envasado en caliente. Esta resina ha sido diseñada para satisfacer los requisitos de desempeño exigentes, especialmente en las áreas de resistencia al resquebramiento por tensiones ambientales (ESCR), rigidez, resistencia al impacto y sensoriales, mientras que conservan las características de procesabilidad beneficiosas para los moldeadores. - Excelente ESCR, rigidez, y resistencia al impacto - Excelente propiedades sensoriales - Excelente características de procesabilidad Cumple con: - U.S. FDA 21 CFR 177.1520©3.2a - U.S. FDA-DMF - Canadian HPFB No Objection - Europe Commission Regulation (EU) No 10/2011 Consulte las regulaciones para obtener detalles completos.

CONTINUUM™ DMDC-1270 NT 7 High Density Polyethylene Resin (HDPE) está diseñado para su uso en aplicaciones de tapas moldeado por compresión e inyección, incluidas las tapas de refrescos carbonatados y para llenado en caliente. Esta resina ha sido diseñada para cumplir con los exigentes requisitos de rendimiento, especialmente en las áreas de resistencia al agrietamiento por estrés ambiental, rigidez, resistencia al impacto y sensorial, al tiempo que mantiene buenas características de procesamiento beneficiosas para los moldeadores. Características principales: - Excelente ESCR, rigidez y resistencia al impacto - Excelentes propiedades sensoriales - Excelentes características de procesamiento - Contiene aditivo de deslizamiento Cumple con - U.S. FDA 21 CFR 177.1520(c)3.2a - Canadian HPFB No Objection - Europe Commission Regulation (EU) No 10/2011 - Consulte las regulaciones para detalles completos.

CONTINUUM™ DMDD-6620 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance. DMDD-6620 NT 7 is specifically designed for use in extrusion blow molding equipment, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance. This reason offers excellent processability with low plate out properties. This product is especially well suited to packaged health care and pharmaceutical products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 - U.S. FDA-DMF - Canadian HPFB No Objection - USP Class VI Consult the regulations for complete details. Additive Antiblock:No Slip: No Processing Aid: Yes

CONTINUUM™ DMDD-6620 NT 7 Bimodal High Density Polyethylene Resin es producido con tecnología UNIPOL™ II. Esta resina tiene alta rigidez con un rendimiento de carga superior junto con una excelente resistencia al agrietamiento por estrés ambiental. DMDD-6620 NT 7 está diseñado específicamente para su uso en equipos de extrusión de moldes soplados, produciendo contenedores de hasta 20 galones de tamaño, que requieren una carga superior. Esta resina ofrece una excelente procesabilidad con fácil desmoldeo. Este producto es especialmente adecuado para envasar productos químicos industriales domésticos (por ejemplo, detergentes y suavizantes de telas), artículos de tocador y cosméticos (por ejemplo, champús, cremas, lociones, etc.), productos de salud y alimentos. - Alta rigidez para un rendimiento de carga superior - Excelente resistencia a las grietas por estrés ambiental - Alta resistencia al impacto - Buenas características de extrusión Cumple con: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 - U.S. FDA-DMF - Canadian HPFB No Objection Consulte las regulaciones para detalles completos.

CONTINUUM™ DMDE-1250 NT 7 Resina de Polietileno de Alta Densidad (HDPE) se utiliza tanto en aplicaciones moldeadas de cierre por inyección como por compresión. Esta resina ha sido diseñada para satisfacer requisitos de desempeño exigentes, especialmente en las áreas de resistencia al resquebrajamiento por tensiones ambientales (ESCR), rigidez, resistencia al impacto y sensoriales, mientras que conserva las características de procesabilidad beneficiosas para los moldeadores. Características Principales: - Excelente ESCR, Rigidez, y Resistencia al Impacto - Excelentes propiedades sensoriales - Excelente características de Procesabilidad - Contiene Agente Antideslizante Cumple con: - Regulación 21 CFR 177.1520 (c) 3.2a.de la Administración de Alimentos y Medicamentos (FDA) de los EE.UU. Para mayor información, por favor consulte las regulaciones.

La resina de polietileno de alta densidad bimodal experimental XDMDD-6620 NT 7 es producida con al tecnología de proceso UNIPOL™ II. Esta resina tiene gran rigidez y un desempeño destacado en carga superior junto con una excelente resistencia a las fisuras por esfuerzo ambiental. La XDMDD-6620 NT 7 está diseñada específicamente para ser usada en equipos de moldeo por extrusión-soplado, produciendo tamaños de hasta 20 galones, lo cual exige una carga superior mayor combinada con una excelente resistencia a las fisuras por esfuerzo ambiental. Por este motivo tiene una excelente procesabilidad con propiedades de baja sedimentación. Este producto resulta especialmente adecuado para recipientes utilizados para envasar productos químicos de uso doméstico (por ejemplo detergentes y suavizantes para telas), productos de higiene personal y cosméticos (por ejemplo champús, cremas, lociones, etc.), y productos para la salud y alimentos. - Alta rigidez para un mayor desempeño con carga superior - Excelente resistencia a las fisuras por esfuerzo ambiental - Alta resistencia a los impactos - Buencs características de extrusión Cumple con: - U.S. FDA 21 CFR 177.1520(c)3.2a - U.S. FDA DMF - U.S. USP Class VI - Canadian HPFB No Objection - EU, No 10/2011 Consulte los reglamentos para obtener más detalles.

CONTINUUM™ DMDE-6620 NT 7 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. CONTINUUM™ DMDE-6620 NT 7 HEALTH+™ Bimodal is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package health care and pharmaceutical products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - U.S. FDA DMF - U.S. USP Class VI - Canadian HPFB No Objection - EU, No 10/2011 Consult the regulations for complete details.

CONTINUUM™ DMDF-6620 NT 7 Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. DMDF-6620 NT 7 is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package household industrial chemicals (e.g. detergents, and fabric softeners), toiletries and cosmetics (e.g. shampoos, creams, lotions, etc.), health, pharmaceutical, and food products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - U.S. USP Class VI - EU, No 10/2011 Consult the regulations for complete details.

CONTINUUM™ DMDF-6620 NT 7 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. CONTINUUM™ DMDF-6620 NT 7 HEALTH+™ Bimodal is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package health care and pharmaceutical products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - U.S. USP Class VI - EU, No 10/2011 Consult the regulations for complete details.