- High crystallinity, extrusion grade nylon 6 resin suitabale for both cast and blown film in mono- and co-extrusions. - Suitable for some profile extrusion such as tubing, shapes, etc. - Good oxygen and flavor barrier to increase shelf life - Nylene films can be drawn to provide pockets for many food shapes and does not absorb food odors. - Offers chemical and heat resistance for hot filling wide range of food and chemicals

- High viscosity nylon 6 designed for the extrusion of blown film (both mono-layer and multi-layer film structures). - Suitable for profile extrusion such as tubing, shapes, etc. - Good oxygen and flavor barrier to increase shelf life - Nylene NX3064N has superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors. - Nylene films can be drawn to provide pockets for many food shapes. - Offers chemical and heat resistance for hot filling wide range of food and chemicals

- Nylene NX3411HSL Hi-RV is a high viscosity, heat stabilized, extrusion grade, nylon 6 with a special lubrication package to enhance antiblock properties. - Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.

- Nylene NX3411HSL is a high viscosity, heat stabilized, extrusion grade, nylon 6 with a special lubrication package to enhance antiblock properties. - Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.

- High viscosity, nucleated, nylon 6 extrusion grade resin - Crystallization initiators provide rapid melt set-up in higher speed processing applications - Optimum processing conditions should provide a melt temperature of 550 - 575°F at the die

- High viscosity, UV stabilized extrusion grade nylon resistant to degradation by ultraviolet light - The elevated quality of UV resistance is attributed to highly uniform dispersion of 2% carbon black - With an ASTM viscosity of 200, NX4301 has very good melt flow and melt strength characteristics which are important for profile extrusion - Optimum processing conditions should permit for a melt temperature of 550 - 575°F at the die. (Available in black only)

- Nucleated extrusion grade suitable for cast and blown film - Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors - Excellent melt stability and good melt strength, plus faster set-up for increased line speeds

- Heat stabilized nylon copolymer with 14% glass fiber reinforcement - Suitable for such uses as under-the-hood fluid reservoirs - Maximum clarity is achieved by using low mold temperatures - Developed to have excellent light transmittance combined with high strength, stiffness, and resistance to automotive type fluids

- Heat stabilized, lubricated nylon 6 intended for use in coating wire, usually extrusion coated over a layer of PVC on electrical wires for toughness, temperature resistance, and insulating properties, and contains a high slip additive for ease of use when pulling wire through conduit. - Delivered dry, with less than 0.2% moisture, and can be extruded as received.

- Nylene NX4797 is a nylon 6 polymer designed for use in extrusion of cast and blown film. - Like most PA6, it has excellent grease resistance, toughness, and resistance to abrasion. - Films made from Nylene NX4797 have barrier properties against oxygen and aroma typical of nylon 6. - Nylene NX4797 meets the requirements of 21 CFR 177.1500 for food contact. - Nylene NX4797 has good melt strength for film stability.

- Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions - Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. - Plasticized, high residual monomer resin designed for extrusion applications

- Nylon 6,6/6 copolymer. Nylene PAC6-135 is suitable for use in extrusion, and film applications - Has the heat and chemical resistance of nylon, with the lower crystallinity typical of type 6,6/6 grades - Suitable for high clarity film - FDA 21 CFR 177.1500

- Nylene PAC690-130HSL is a high viscosity, heat stabilized, extrusion grade, nylon 6/66 copolymer with a special lubrication package to enhance antiblock properties. - Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.

- Nylene® PAC690-95 is a Nylon 6/66 copolymer suitable for both blown and cast film co-extrusion. - This product can be processed effectively with extruder barrel and die temperatures set to give melt temperatures in the range of 440 - 500 °F (227 - 260 °C). - FDA 21 CFR 177.1500 for nylon 6/66 - Because Nylene PAC690-95 is polymerized using a continuous process, it has good lot-to-lot consistency.

- Nylene PAC900-120U is a high viscosity copolymer of nylon 6 and 6,9. - PAC900-120U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.

- Nylene PAC9-140U is a high viscosity copolymer of nylon 6 and 6,9. - PAC9-140U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures. - Effective processing is achieved with extruder and die temperatures in the range of 450 - 525 °F (232°C - 274°C) but may be processed as low as 420 °F (216 °C). - Nylene PAC900-140U advantages include high elongation, good clarity and flexibility, and lower processing temperatures.

- Nylene PAC990-130HSL is a high viscosity, heat stabilized, extrusion grade, nylon 6/69 copolymer with a special lubrication package to enhance antiblock properties. - Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.

- Nylene PAC9-140U is a high viscosity copolymer of nylon 6 and 6,9. - PAC9-140U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.

- Lower melt point compared to nylon 6 = lower processing temperatures - Improved ductility - Better impact - Lower crystallinity material can produce near clear parts at less than 1.5 mm thickness

Nylene PX1719 is a heat-stabilized, modified nylon 6 molding and extrusion resin with high impact resistance and low flexural modulus.

Nylene PX3422 is very tough heat-stabilized, modified nylon 6 molding resin with very high impact resistance.