Poliamida (nylon): Nylon 612
Producto | Disponibilidad | Descripción del producto |
---|---|---|
HiDura™ D0MW BK0804 | Asia-Pacífico |
HiDura D0MW BK0804 is a weatherable, lubricated, low viscosity PA612 molding grade. It exhibits excellent flow and release making it suitable for injection molding of thin parts (e.g. cable ties). It exhibits low moisture absorption, good chemical resistance, dimensional stability and weather resistance making it ideal for outdoor applications. PA612 offers a unique balance of thermal, mechanical and physical properties.
|
HiDura™ D0X NT | Asia-Pacífico |
HiDura D0X NT is a neat, low viscosity PA612 grade. Given its low melt viscosity and excellent flow, it is a suitable feedstock for injection molding of thin or highly filled parts and in certain extrusion applications. It exhibits low moisture absorption, good chemical resistance and dimensional stability. PA612 offers a unique balance of thermal, mechanical and physical properties.
|
HiDura™ D1MG33H BK0814 | Asia-Pacífico |
HiDura D1MG33H BK0814 is a heat stabilized, 33% glass filled PA612 material designed for injection molding applications.
|
HiDura™ D1MG33H NT0863 | África y Oriente Medio |
HiDura D1MG33H NT0863 is a heat stabilized, 33% glass filled PA612 designed for injection molding applications.
|
HiDura™ D1MG33J BK0816 | Asia-Pacífico |
HiDura D1MG33J BK0816 is an organically heat stabilized, 33% glass filled PA612 designed for injection molding applications.
|
HiDura™ D1MG33J NT0864 | África y Oriente Medio |
HiDura D1MG33J NT0864 is an organically heat stabilized, 33% glass filled PA612 designed for injection molding applications.
|
HiDura™ D1X NT | Asia-Pacífico |
HiDura D1X NT is a low-medium viscosity PA612 grade. It is suitable for monofilament, film and general purpose injection molding applications. It exhibits low moisture absorption, good chemical resistance, dimensional stability and high impact resilience. PA612 offers a unique balance of thermal, mechanical and physical properties.
|
HiDura™ D1XA NT | Asia-Pacífico |
HiDura D1XA NT is a low-medium viscosity PA612 grade. It is suitable for monofilament, film and general purpose injection molding applications. It exhibits low moisture absorption, good chemical resistance, dimensional stability and high impact resilience. PA612 offers a unique balance of thermal, mechanical and physical properties.
|
HiDura™ D1XI2J BK0842 | África y Oriente Medio |
HiDura D1XI2J BK0842 is a low viscosity, medium impact modified, and heat stabilized PA612 grade. It is suitable for profile and pipe extrusions. It exhibits low moisture absorption, good chemical resistance, dimensional stability, and high impact resistance. PA612 offers a unique balance of thermal, mechanical, and physical properties.
|
HiDura™ D2X NT | Asia-Pacífico |
HiDura D2X NT is a medium-high viscosity PA612 grade. It is suitable for monofilament, film and profile extrusion applications. It exhibits low moisture absorption, good chemical resistance, dimensional stability and high impact resilience. PA612 offers a unique balance of thermal, mechanical and physical properties.
|
HiDura™ D3X NT | Asia-Pacífico |
HiDura D3X NT is a high viscosity PA612 grade. It is suitable for monofilament, film and profile extrusion applications; it can also be used for molded applications where high abrasion resistance and ductility are key requirements. It exhibits low moisture absorption, good chemical resistance, dimensional stability, and high impact resilience. PA612 offers a unique balance of thermal, mechanical and physical properties.
|
HiDura™ D3XI3J BK0808 | África y Oriente Medio |
HiDura D3XI3J BK0808 is a high viscosity, low impact modified, and heat stabilized PA612 grade. It is suitable for profile and pipe extrusions. It exhibits low moisture absorption, good chemical resistance, dimensional stability, and high impact resistance. This grade offers high burst pressures for extruded tubing systems. PA612 offers a unique balance of thermal, mechanical, and physical properties.
|
HiFill® PA6/12 CF30 BK | Norteamérica | |
HiFill® PA6/12 GF33 UV BK001 | Norteamérica | |
HYLON® N7200HL BK | Norteamérica |
PA 612, Heat Stabilized, Lubricated, Black Color, Post Industrial Recycled Feedstock
|
HYLON® N7233HL BK | Norteamérica |
PA 612, 33% Glass Fiber Reinforced, Heat Stabilized, Lubricated, Black Color, Post Industrial Recycled Feedstock
|
InStruc® PA612GF10 | África y Oriente Medio |
10% GLASS FIBER REINFORCED NYLON 612
|
InStruc® PA612GF20 | África y Oriente Medio |
20% GLASS FIBER REINFORCED NYLON 6/12
|
InStruc® PA612GF30 | África y Oriente Medio |
30% GLASS FIBER REINFORCED NYLON 6/12
|
InStruc® PA612GF43 | África y Oriente Medio |
43% GLASS FIBER REINFORCED NYLON 6/12
|
InStruc® PA612GF50HS | África y Oriente Medio |
50% GLASS FIBER REINFORCED, HEAT STABILIZED NYLON 612
|
Isocor™ HG20SC | Europa |
ISOCOR™ HG20SC is a medium viscosity compounding grade PA-612 based nylon. This resin is specifically suited for applications requiring low-moisture regain and greater dimensional stability. Isocor™ HG20SC is used in applications requiring good electrical insulation properties. This resin can be processed using conventional techniques.
Tyical applications for HG20SC include:
- Injection Molding
- Automotive
- Lawn and Garden
- Tubing
- Films
|
Isocor™ HG26SI | Europa |
ISOCOR™ HG26SI is a medium viscosity PA-612 based nylon. This resin is specifically suited for applications requiring low-moisture regain and greater dimensional stability. ISOCOR™ HG26SI is used in applications requiring good electrical insulation properties. This resin can be processed using conventional techniques.
Typical applications for HG26SI include:
- Cable Jacketing
- Bristles
- Extrusion
- Tubing
- Films
|
Jieda PA612 Resin | Asia-Pacífico |
PA612 (Polyamide 612 or nylon 612) is a milky white to light yellow translucent solid made by the condensation polymerization of the neutralized salt of dodecanedioic acid and hexanediamine. General properties are similar to those of PA610 except it has better flexibility and dimensional stability, and has lower water absorption. End use applications include monofilaments, cables and ropes, coil skeletons, mechanical components, tool frames, ammunition boxes, etc.
|
Latamid SP2 H2 G/35 | África y Oriente Medio |
Polyamide 6.12 (PA6.12) based compound. Heat stabilized. Glass fibres. Low moisture absorption.
|
Latamid SP2 H2 G/45 | África y Oriente Medio |
Polyamide 6.12 (PA6.12) based compound. Heat stabilized. Glass fibres. Low moisture absorption.
|
LNP™ COLORCOMP™ Compound I1000 | África y Oriente Medio |
LNP COLORCOMP I1000 compound is based on unfilled Nylon 6/12 resin.
|
LNP™ LUBRICOMP™ Compound IAL12 | África y Oriente Medio |
LNP LUBRICOMP IAL12 compound is based on Nylon 6/12 resin containing 5% PTFE, 10% aramid fiber. Added features of this grade include: Wear Resistant.
|
LNP™ LUBRICOMP™ Compound IBP34 | África y Oriente Medio |
LNP LUBRICOMP IBP34 compound is based on Nylon 6/12 resin containing 20% glass bead, 15% PTFE/silicone. Added features of this grade include: Wear Resistant.
|
LNP™ LUBRICOMP™ Compound IFL21 - Americas | Latinoamérica |
LNP LUBRICOMP IFL21 compound is based on Nylon 6/12 resin containing 5% glass fiber, 10% PTFE. Added features of this grade include: Wear Resistant.
|
LNP™ LUBRICOMP™ Compound IFL21 - Asia | Asia-Pacífico |
LNP LUBRICOMP IFL21 compound is based on Nylon 6/12 resin containing 5% glass fiber, 10% PTFE. Added features of this grade include: Wear Resistant.
|
LNP™ LUBRICOMP™ Compound IFL34 | África y Oriente Medio |
LNP LUBRICOMP IFL34 compound is based on Nylon 6/12 resin containing 20% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant.
|
LNP™ LUBRICOMP™ Compound IFL36 - Americas | Latinoamérica |
LNP LUBRICOMP IFL36 compound is based on Nylon 6/12 resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant.
|
LNP™ LUBRICOMP™ Compound IFL36 - Europe | Europa |
LNP LUBRICOMP IFL36 compound is based on Nylon 6/12 resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant.
|
LNP™ LUBRICOMP™ Compound IFL36L | África y Oriente Medio |
LNP LUBRICOMP IFL36L compound is based on Nylon 6/12 resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Low Extractable, Wear Resistant.
|
LNP™ LUBRICOMP™ Compound IFL36R | África y Oriente Medio |
LNP LUBRICOMP IFL36R compound is based on Nylon 6/12 resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant, Mold Release.
|
LNP™ LUBRICOMP™ Compound IFP36 | África y Oriente Medio |
LNP LUBRICOMP IFL36 compound is based on Nylon 6/12 resin containing 30% glass fiber, 15% PTFE/silicone. Added features of this grade include: Wear Resistant.
|
LNP™ LUBRICOMP™ Compound IL004 | África y Oriente Medio |
LNP LUBRICOMP IL004 compound is based on Nylon 6/12 resin containing 20% PTFE. Added features of this grade include: Wear Resistant.
|
LNP™ LUBRICOMP™ Compound IZL33 | África y Oriente Medio |
LNP LUBRICOMP IZL33 compound is based on Nylon 6/12 resin containing 15% milled glass and 15% PTFE. Added features of this grade include: Wear Resistant.
|
LNP™ STAT-KON™ Compound IS000XXL | África y Oriente Medio |
LNP STAT-KON IS000XXL compound is based on Nylon 6/12 resin containing stainless steel fiber. Added features of this grade include: Food Contact Compliant, Metal Detectable, Electrically Conductive.
|