Dryflex CS are a range of thermoplastic elastomer (TPE) compounds, based on SEBS. The range has been engineered to deliver optimised compression set performance. The raw materials used to manufacture Dryflex CS compounds are compliant with food contact regulations. The compounds also offer excellent organoleptic performance.

Dryflex CS are a range of thermoplastic elastomer (TPE) compounds, based on SEBS. The range has been engineered to deliver optimised compression set performance. The raw materials used to manufacture Dryflex CS compounds are compliant with food contact regulations. The compounds also offer excellent organoleptic performance.

Description: Thermoplastic Elastomer, TPS-SEBS Colour: Black Form: Free flowing pellets Recycling: 100% recyclable Special Features: TPE for drinking water applications approved according to German W270 and KTW guidelines for cold (23°C) and warm water (60°C).

Description: Thermoplastic Elastomer, TPS-SEBS Colour: Natural Form: Free flowing pellets Recycling: 100% recyclable Special Features: TPE for drinking water applications approved according to German W270 and KTW guidelines for cold (23°C) and warm water (60°C).

Description: Thermoplastic Elastomer, TPS-SBS Colour: Natural, but can easily be coloured Form: Free flowing pellets Service Temperature: -50 to +100°C (Unstressed Material) Recycling: 100% Recyclable Special Features: This material is partly based on renewable raw materials.

Description: Thermoplastic Elastomer, TPS-SEBS Service Temperature: -50 to+125°C (unstressed material) Colour: Natural, but can be available in any colour. Form: Free flowing pellets. Weather Resistance: Good Chemical Resistance: Good (excluding organic solvents, aromatic-and vegetable oils). Recyclability: 100% recyclable Special Features: The material has good adhesion to PC/ABS, ABS and PC.

Dryflex Green OFB50A801: Thermoplastic Elastomer Material Type: TPZ Hardness: 50 Shore A (4mm) Service Temperature Range: -30 to+100°C (unstressed material) Color: Opaque/White, but the base material can be available in any color. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Good Chemical Resistance: Good (excluding organic solvents, aromatic-and vegetable oils). Recyclability: 100% recyclable Special Features: The material is partly baseed on renewable raw materials. Processing: The material has excellent processing characteristics and can be processed using conventional thermoplastic fabricating methods, including injection moulding and extrusion.

Dryflex Green OFB70A801: Thermoplastic Elastomer Material Type: TPZ Hardness: 70 Shore A (4mm) Service Temperature Range: -30 to+100°C (unstressed material) Color: Opaque/White, but the base material can be available in any color. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Good Chemical Resistance: Good (excluding organic solvents, aromatic-and vegetable oils). Recyclability: 100% recyclable Special Features: The material is partly baseed on renewable raw materials. Processing: The material has excellent processing characteristics and can be processed using conventional thermoplastic fabricating methods, including injection moulding and extrusion.

Description: Thermoplastic Elastomer, TPS-SEBS Colour: Green Form: Free flowing pellets Service Temperature: -50 to +125°C (unstressed material) Recycling: Recyclable in closed-loop systems Special Features: This grade contains approximately 40% by weight of Maritime Waste Recyclate.

Dryflex OF500: Thermoplastic Elastomer Material Type: TPS-SEBS Hardness: 50 Shore A (4mm) Service Temperature Range: -50 to +80°C (unstressed material) Color: Transparent, but can be available in any color. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Good Chemical Resistance: Good (excluding organic solvents, aromatic-and vegetable oils). Recyclability: 100% recyclable Special Features: The material is based on medically approved materials. Processing: The material has excellent processing characteristics and can be processed using conventional thermoplastic fabricating methods, including injection moulding and extrusion.

Description: Thermoplastic Elastomer, TPS-SBS Colour: Black Form: Free flowing pellets Service Temperature: -50 to +125°C (unstressed material) Recycling: Recyclable in closed-loop systems Special Features: This grade contains approximately 37% by weight of Post Consumer Recyclate.

Dryflex PCW 40D701B: Thermoplastic Elastomer Base Material: TPO Hardness: 40 Shore D Service Temperature Range: -50 to +120°C (Unstressed Material). Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE

Dryflex PCW 50D801B: Thermoplastic Elastomer Base Material: TPO Hardness: 50 Shore D Service Temperature Range: -50 to +120°C (Unstressed Material). Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE Special Features: This grade contains approximately 80% by weight of Post Consumer Waste

Dryflex PCW 80A651B: Thermoplastic Elastomer Base Material: TPO Hardness: 80 Shore A Service Temperature Range: -50 to +75°C (Unstressed Material). Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE

Dryflex PCW 90A331B: Thermoplastic Elastomer Base Material: TPO Hardness: 90 Shore A Service Temperature Range: -50 to +75°C (Unstressed Material). Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE

Dryflex PCW 91A701B: Thermoplastic Elastomer Base Material: TPO Hardness: 91 Shore A Service Temperature Range: -50 to +120°C (Unstressed Material). Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE Special Features: This grade contains approximately 70% by weight of Post Consumer Waste

Dryflex PCW 92A331B: Thermoplastic Elastomer Base Material: TPO Hardness: 92 Shore A Service Temperature Range: -50 to +75°C (Unstressed Material). Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE Special Features: This grade contains approximately 33% by weight of Post Consumer Waste

Dryflex PCW 93A331B: Thermoplastic Elastomer Base Material: TPO Hardness: 93 Shore A Service Temperature Range: -50 to +75°C (Unstressed Material). Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE

Description: Thermoplastic Elastomer, TPS-SBS Colour: Natural, but can easily be coloured Form: Free flowing pellets Service Temperature: -50 to +125°C (Unstressed Material) Recycling: 100% Recyclable Special Features: This grade contains approximately 32% by weight of Post Industrial Recyclate.

Description: Thermoplastic Elastomer, TPS-SBS Colour: Natural, but can easily be coloured Form: Free flowing pellets Service Temperature: -50 to +125°C (Unstressed Material) Recycling: 100% Recyclable Special Features: This grade contains approximately 43% by weight of Post Industrial Recyclate.

Dryflex PS 50R201B: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 50 IRHD Service Temperature Range: -50°C to 120°C Colour: Black, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Special Features: Meets the requirements of BS EN 681-2-2000, the European Standard EN 681-2, Type WT, elastomeric seals for pipe joints

DryflexPS 60R201B: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 60 IRHD Service Temperature Range: -50 to 120°C Colour: Black, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Special Features: Meets the requirements of BS EN 681-2-2000, the European Standard EN 681-2, Type WT, elastomeric seals for pipe joints

Dryflex PS 70R201B: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 70 IRHD Service Temperature Range: -50°C to 120°C Colour: Black, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Special Features: Meets the requirements of BS EN 681-2-2000, the European Standard EN 681-2, Type WT, elastomeric seals for pipe joints

Description: Thermoplastic Elastomer, TPS-SBS Colour: Natural, but can easily be coloured Form: Free flowing pellets Service Temperature Range: -50 to +75°C (unstressed material) Recycling: 100% recyclable

Description: Thermoplastic Elastomer, TPS-SEBS Colour: Natural, but can easily be coloured Form: Free flowing pellets Service Temperature: -50 to +75°C (unstressed material) Recycling: 100% recyclable

Description: Thermoplastic Elastomer, TPS-SBS Colour: Lime Green Form: Free flowing pellets Service Temperature: -50 to +75°C (unstressed material) Recycling: Recyclable in closed-loop systems

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The Dryflex SE unfilled series is favourable when translucency and good scratch resistance are required, as well as when there are high surface finish requirements. The material enables an easy and secure pigmenting. Unfilled grades have excellent flow and mechanical properties. The low density results in lower weight compared to the filled and semi-filled series. Dryflex SE unfilled compounds are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Description: Thermoplastic Elastomer, TPS-SEBS Colour: Natural Form: Free flowing pellets Service temperature: -50 to +125°C (unstressed material) Recycling: Recyclable in closed-loop systems Special Features: Standard TPE optimised for injection molding

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Dryflex SE 30A201N U: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 30 Shore A Service Temperature: -50 to +125°C (Unstressed Material). Colour: Translucent, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone-/UV- Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The most significant features of the Dryflex SE filled series are an improved heat stability. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. The filled grades generally allow for fast demoulding and shorter cycle times. Compounds in the Dryflex SE filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The Dryflex SE unfilled series is favourable when translucency and good scratch resistance are required, as well as when there are high surface finish requirements. The material enables an easy and secure pigmenting. Unfilled grades have excellent flow and mechanical properties. The low density results in lower weight compared to the filled and semi-filled series. Dryflex SE unfilled compounds are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Description: Thermoplastic Elastomer, TPS-SEBS Colour: Black Form: Free flowing pellets Service Temperature: -50 to +125°C (unstressed material) Recycling: 100% recyclable

Description: Thermoplastic Elastomer, TPS-SEBS Colour: Translucent, but can easily be coloured Form: Free flowing pellets Service Temperature: -50 to +125°C (unstressed material) Recycling: 100% recyclable

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The most significant features of the Dryflex SE filled series are an improved heat stability. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. The filled grades generally allow for fast demoulding and shorter cycle times. Compounds in the Dryflex SE filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The Dryflex SE unfilled series is favourable when translucency and good scratch resistance are required, as well as when there are high surface finish requirements. The material enables an easy and secure pigmenting. Unfilled grades have excellent flow and mechanical properties. The low density results in lower weight compared to the filled and semi-filled series. Dryflex SE unfilled compounds are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The most significant features of the Dryflex SE filled series are an improved heat stability. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. The filled grades generally allow for fast demoulding and shorter cycle times. Compounds in the Dryflex SE filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The Dryflex SE unfilled series is favourable when translucency and good scratch resistance are required, as well as when there are high surface finish requirements. The material enables an easy and secure pigmenting. Unfilled grades have excellent flow and mechanical properties. The low density results in lower weight compared to the filled and semi-filled series. Dryflex SE unfilled compounds are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.