Silicone: NuSil™
Product | Availability | Product Description |
---|---|---|
NuSil™ MED-4820 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system designed for use with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a low durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4830 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system designed for use with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a medium durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4840 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system designed for use with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a medium durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4842 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, white silicone system designed for use with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
- High tear strength
- Designed to resist blocking and rehealing that otherwise might be induced by the radiation sterilization of molded parts.
APPLICATION
- For the injection molding of parts requiring a material with a medium durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4850 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system designed for use with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a medium durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4860 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system designed for use with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a high durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4870 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system designed for use with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a high durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4880 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system designed for use with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a high durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4901 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system designed for use with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a very low durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4905 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system used with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a low durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4910 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system used with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a low durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4917 | Africa & Middle East |
Low consistency silicone elastomer
DESCRIPTION
- A solvent free, two-part, translucent silicone system
- Viscosity and long work time suitable for automatic dispensing
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For use in potting, encapsulating, coating, and injection or transfer molding applications
- Effective as a dip-coating for encapsulating components
|
NuSil™ MED-4920 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system used with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a low durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4930 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system used with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a medium durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4940 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system used with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a medium durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4942 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, white silicone system used with injection molding equipment
- Cures with heat via addition-cure chemistry
- Designed to resist blocking on molded parts caused by radiation sterilization
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a medium durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4950 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system used with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a medium durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4960 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system used with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a high durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4970 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system used with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a high durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-4980 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system used with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a high durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED50-5338 | Africa & Middle East |
Fluorosilicone liquid silicone rubber
DESCRIPTION
- Two-part, translucent fluorosilicone elastomer
- 50 mole % fluorosilicone
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a medium durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- For applications requiring resistance to solvents, oils and dimethyl silicone fluids
|
NuSil™ MED50-5438 | Africa & Middle East |
Fluorosilicone liquid silicone rubber
DESCRIPTION
- Two-part, translucent fluorosilicone elastomer
- Cures with heat via addition-cure chemistry
- 50 mole % fluorosilicone
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a medium durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- For applications requiring resistance to solvents, oils and dimethyl silicone fluids
|
NuSil™ MED-5440 | Africa & Middle East |
Liquid injection molding fluorosilicone liquid silicone rubber
DESCRIPTION
- Two-part, translucent fluorosilicone elastomer
- 100 mole % fluorosilicone
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a medium durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- For applications requiring resistance to solvents, oils and dimethyl silicone fluids
|
NuSil™ MED-5820 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system designed for use with injection molding equipment
- Rapid cure with no post-cure required
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a high durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-5830 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system designed for use with injection molding equipment
- Rapid cure with no post-cure required
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a high durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-5840 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system designed for use with injection molding equipment
- Rapid cure with no post-cure required
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a high durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-5850 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system designed for use with injection molding equipment
- Rapid cure with no post-cure required
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a high durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-5860 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system designed for use with injection molding equipment
- Rapid cure with no post-cure required
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a high durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-5870 | Africa & Middle East |
Liquid silicone rubber
DESCRIPTION
- Two-part, translucent silicone system designed for use with injection molding equipment
- Rapid cure with no post-cure required
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For the injection molding of parts requiring a material with a high durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
|
NuSil™ MED-6010 | Africa & Middle East |
Optically clear low consistency silicone elastomer
DESCRIPTION
- An optically clear, two-part silicone
- A pourable, medium viscosity material
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For use in potting, encapsulating, coating, and injection or transfer molding applications
|
NuSil™ MED-6015 | Africa & Middle East |
Optically clear low consistency silicone elastomer
DESCRIPTION
- Two-part, optically clear, solvent free, low viscosity silicone elastomer
- Cures with heat via addition-cure chemistry
- 10:1 Mix Ratio (Part A: Part B)
APPLICATION
- For use in potting, encapsulating, coating, and injection or transfer molding applications
|
NuSil™ MED-6019 | Africa & Middle East |
Optically clear, high durometer low consistency silicone elastomer
DESCRIPTION
- Flowable, two-part, optically clear, high durometer silicone
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For use in potting, encapsulating, coating, and injection or transfer molding applications
- Useful in any application requiring a flowable, high durometer material
|
NuSil™ MED-6020 | Africa & Middle East |
Optically clear low consistency silicone elastomer
DESCRIPTION
- Two-part, pourable, optically clear, silicone elastomer
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For use in potting, encapsulating, coating, and injection or transfer molding applications
- As an adhesive or encapsulant for applications requiring optical clarity
|
NuSil™ MED-6033 | Africa & Middle East |
Clear low consistency silicone elastomer
DESCRIPTION
- Two-part, pourable clear, silicone elastomer
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For use in potting, encapsulating, coating, and injection or transfer molding applications
|
NuSil™ MED-6210 | Africa & Middle East |
Optically clear low consistency silicone elastomer
DESCRIPTION
- Optically clear, two-component silicone elastomer
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For use in potting, encapsulating, coating, and injection or transfer molding applications
|
NuSil™ MED-6215 | Africa & Middle East |
Optically clear low consistency silicone elastomer
DESCRIPTION
- Two-part, optically clear, solvent free, low viscosity silicone elastomer
- Cures with heat via addition-cure chemistry
- 10:1 Mix Ratio (Part A: Part B)
APPLICATION
- For use in potting, encapsulating, coating, and injection or transfer molding applications
- Use in the casting of clear silicone parts
- Use as a coating, by means of dipping or painting.
|
NuSil™ MED-6219 | Africa & Middle East |
Optically clear, high durometer low consistency silicone elastomer
DESCRIPTION
- Flowable, two-part, optically clear, high durometer silicone
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For use in potting, encapsulating, coating, and injection or transfer molding applications
- Useful in any application requiring a flowable, high durometer material
|
NuSil™ MED-6233 | Africa & Middle East |
Optically clear low consistency silicone elastomer
DESCRIPTION
- Pourable, optically clear, two-part silicone elastomer
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
APPLICATION
- For use in potting, encapsulating, coating, and injection or transfer molding applications
|
NuSil™ MED-6311 | Africa & Middle East |
High purity silicone gel
DESCRIPTION
- A high purity, clear silicone gel manufactured under controlled conditions
- Resists fracturing under stress
- Easy mixing, two-component, low viscosity system
- 1:1 Mix Ratio (Part A: Part B)
- NuSil can formulate custom materials to meet specific penetration requirements
APPLICATION
- Ideal for potting, encapsulating, casting, backfilling, and dampening
|
NuSil™ MED-6342 | Africa & Middle East |
Soft silicone adhesive
DESCRIPTION
- A clear silicone gel adhesive
- A low viscosity liquid that cures to a firm, high tack silicone gel
- 1:1 Mix Ratio (Part A: Part B)
- Solventless
APPLICATION
- Can be considered for wound care applications, scar care products, wearable monitoring devices and medical tape
- Can be used to coat various substrates
|