TC-5005 A/B is a room temperature curing silicone elastomer intended primarily for making silicone skins, but is also used as a general purpose rubber. This product is a condensation cured system using a tin catalyst that provides a 40-60 minute work time with 16-24 hour demold time. If a softer product is required, our SC-5002 can be added to this or any other silicones to increase their elongation and reduce their hardness. - RoHS/REACH SVHC Compliant - Low viscosity and easily poured - Perfect for skin simulation - Translucent in color - High elongation

TC-5015 A/B is a room temperature, addition/platinum curing silicone rubber designed for making molds and parts. When used to make molds, the TC-5015 A/B is translucent enough to see-through when casting into the mold cavity. This aids in developing void free surfaces on the casting. TC-5015 A/B is also commonly used to make ink stamp pads as well as other types of pressure pads.

TC-5024 A/B is a two-component, room temperature curing silicone elastomer. This system is designed primarily for making molds, but is also used for gaskets as well as a wide variety of parts. This product is a condensation cured system using a tin catalyst that provides a 30-minute work time with a 4-6 hour demold time. - Excellent physical properties with high tear resistance - Fast demolds - Provides excellent detail reproduction - Cures against various clays including "Roma"

TC-5030 A/B is a room temperature, additional/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various other types of parts. You can see through molds made from this material when casting into it.

TC-5040 A/B is a room temperature, addition/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various other types of parts. When this rubber is used to make certain types of molds, it is translucent enough to see through when casting into the mold cavity.

TC-5041 A/B is a high tear strength, addition/platinum, room temperature curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various types of parts. It is also used to make molds for casting low melting metals. With the use of talc powder as an interface the TC-5041 A/B has been used with cast metal temperatures running 650°F (344°C). With the ability to withstand high temperatures the TC-5041 A/B works very well as a mask for metal spraying and welding operations.

TC-5045 A/B is a room temperature, addition/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various types of parts. It is an excellent mold material for casting rigid and flexible urethane systems. It may also be used as a mold making material for casting low melting metals in continuous operations to 650°F (344°C) and sporadic applications of 850°F (454°C). TC-5045 A/B has proven to be less inhibited in its cure than standard platinum based silicones. It has a very favorable CTE for heat expandable mandrels used in composite tooling.

TC-5050 A/B is a room temperature, addition/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various types of parts. It is also used to make molds for casting low melting metals into. With the use of talc powder as an interface the TC-5050 A/B has been used in production with cast metal temperatures running 650°F (344°C) and has been subject to temperatures up to 850°F (454°C) for making a limited number of casts. With the ability to withstand high temperatures the TC-5050 A/B works very well as a mask for metal spraying and welding operations.

TC-5060 A/B is a room temperature, addition/platinum curing silicone rubber designed for: - Mold making - Encapsulation applications - Pressure pads - Gaskets - Casting low-melt metals into - Various types of parts With the use of talc powder as an interface the TC-5060 has been used with cast metal temperatures running 650°F (344°C) and has been subject to temperatures up to 850°F (454°C) for making a limited number of casts. With the ability to withstand high temperatures the TC-5060 works very well as a mask for metal spraying and welding operations.

TC-5061 A/B is a room temperature, addition/platinum curing silicone rubber designed for: - Mold making - Encapsulation applications - Pressure pads - Gaskets - Casting low-melt metals into - Various types of parts With the use of talc powder as an interface the TC-5061 has been used with cast metal temperatures running 650°F (344°C) and has been subject to temperatures up to 850°F (454°C) for making a limited number of casts. With the ability to withstand high temperatures the TC-5061 works very well as a mask for metal spraying and welding operations.

TC-5100 A/B is a room temperature, addition/platinum curing silicone rubber designed for making flexible parts. Featuring exceptional tear strength, low viscosity, 1:1 mix ratio, and a quick demold time, this system is user friendly while producing high quality finished products. This system is easily pigmented with silicone pigments. This product has been successfully tested for skin safety and cytotoxicity by an independent lab (results are available upon request). If a softer product is required, our SC-5002 can be added to this or any other silicones to increase their elongation and reduce their hardness. - High Tear Strength - Medical Simulations - Translucent/Easily Pigmented - Props for Movie Special FX - Tested for Skin Safety - Tested for Cytotoxicity

TC-5110 A/B is a room temperature, addition/platinum curing silicone rubber designed for making molds and parts. Featuring exceptional tear strength, low viscosity, 1:1 mix ratio, and a quick demold time, this system is user friendly while producing high quality finished products. When used to make molds, the TC-5110 A/B is translucent enough to see through when casting into the mold cavity. For making parts, this system is easily pigmented with silicone pigments. This product has been successfully tested for skin safety and cytotoxicity by an independent lab (results are available upon request). If a softer product is required, our SC-5002 can be added to this or any other silicones to increase their elongation and reduce their hardness. - High Tear Strength - Medical Simulations - Translucent/Easily Pigmented - Props for Movie Special FX - Cures at ambient temperatures - Tested for Skin Safety - Flexible Molds - Tested for Cytotoxicity

TC-5130 A/B is a room temperature, addition/platinum curing silicone rubber designed for making molds and parts. Featuring exceptional tear strength, low viscosity, 1:1 mix ratio, and a quick demold time, this system is user friendly while producing high quality finished products. When used to make molds, the TC-5130 A/B is translucent enough to see through when casting into the mold cavity. For making parts, this system is easily pigmented with BJB’s 8100 Series Silicone Pigments. - High Tear Strength - Medical Simulations - Translucent/Easily Pigmented - Props for Movie Special FX - Low Viscosity - Flexible Molds

TC-5140 A/B is a room temperature, addition/platinum curing silicone rubber designed for making molds and parts. Featuring exceptional tear strength, low viscosity, 1:1 mix ratio, and a quick demold time, this system is user friendly while producing high quality finished products. When used to make molds, the TC-5140 A/B is translucent enough to see through when casting into the mold cavity. For making parts, this system is easily pigmented with BJB’s 8100 Series Silicone Pigments. - High Tear Strength - Fast Cure - Translucent/Easily Pigmented - Gaskets and Parts - Low Viscosity - Flexible Molds

TC-5150 A/B is a room temperature, addition/platinum curing silicone rubber designed for making molds and parts. Featuring exceptional tear strength, low viscosity, 1:1 mix ratio, and a quick demold time, this system is user friendly while producing high quality finished products. When used to make molds, the TC-5150 A/B is translucent enough to see through when casting into the mold cavity. For making parts, this system is easily pigmented with BJB’s 8100 Series Silicone Pigments. - High Tear Strength - Fast Cure - Translucent/Easily Pigmented - Gaskets and Parts - Low Viscosity - Flexible Molds