Polyfort® FPP 1007F is a 40% Talc-Filled, FDA approved Polypropylene Homopolymer

POLYFORT® FPP 1512E is a 10% Talc-Filled, Low-Flow Polypropylene

Polyfort PP 1259 is a medium impact polypropylene with easier molding characteristics for thinner parts and longer flow distances. Lower molding pressures and heats often reduce warpage and mold cycles. Approved for automotive use.

Polyfort PP 1277A-01 is a low-flow, high-impact polypropylene for film, profile, tubing and coating, which require a material with the physical properties typical of those summarized below:

PP Medium Impact Unfilled

Polyfort PP 1329H-01 is a natural high flow, medium impact polypropylene that is suitable for molding thin parts with long mold flow distances. It permits reduction of injection temperatures and pressures and minimizes stress in molding.

Polyfort® PP 1329HU is a high flow UV stabilized, medium impact copolymer polypropylene. It is suitable for applications which require a material with the following properties:

PP High Impact Unfilled

Polyfort PP 1579 is an impact grade of polypropylene for use in parts which require good impact and good appearance in light weight injection molded parts. It meets requirements of Chrysler Corporation Specification MSDB 531F. It is available in current Chrysler Corporation colors in this extra high flow for thin parts or reduced mold cycles.

Polyfort PP 1692 is an exceptional high impact copolymer with high flow for appearance parts. This material is available in Natural.

PP High Impact Unfilled

PP High Flow Medium Impact Unfilled

Polyfort PP 3761U-3120 is an Unfilled Polypropylene Homopolymer

High impact PP copolymer, suitable for injection molding and extrusion

5% mineral filled high impact, low emission and low density PP-Copolymer; good scratch resistance and UV-stability

20% talc filled high flow PP-Copolymer

30% talc filled high impact PP-Copolymer

20% glass fibre reinforced PP Homopolymer chemically coupled, high heat stabilized

30% glass fibre reinforced PP Homopolymer chemically coupled, high heat stabilized, super flow

PP homopolymer

20% talc filled PP-Homopolymer, suitable for food contact applications

PPH MT25H-1737 is a 25% Talc-Filled Polypropylene Homopolymer

PPH MT25 H-3120 is a 25% Talc-Filled Polypropylene Homopolymer

40% talc-filled PP-Homopolymercompound, low emission and low odour

Glass fiber and mineral filled PP Homopolymer

40% glass fibre and mineral reinforced PP-Copolymer reduced warpage.

20% talc filled high impact and low emission PP-Copolymer with good UV-stability especially for automotive interior parts