SABIC® PP CX02-82 is an emission optimised high crystalline copolymer. It offers high stiffness, in perfect balance with high thermal dimensional stability, impact resistance and flow. This material has excellent aesthetic properties as well and is typically used for automotive interior applications. It is the obvious alternative to conventional talc-filled copolymers, offering considerable weight saving advantage. SABIC® PP CX02-82 is a designated automotive grade. IMDS ID: 80775790

SABIC® PP CX03-81 is a high crystalline copolymer. It offers high impact resistance, in perfect balance with high thermal dimensional stability, stiffness and flow.This material has excellent aesthetic properties as well and is typically used for automotive interior applications. It is the obvious alternative to conventional talc-filled copolymers, offering considerable weight saving advantage. SABIC® PP CX03-81 is a designated automotive grade. IMDS ID: 80775790

SABIC® PP CX03-82 is an emission optimised high crystalline copolymer. It offers high impact resistance, in perfect balance with high thermal dimensional stability, stiffness and flow. This for automotive interior applications UV-stabilised material has excellent aesthetic properties as well. It is the obvious alternative to connventional talc-filled copolymers, offering considerable weight saving advantage. SABIC® PP CX03-82 is a designated automotive grade. IMDS ID: 80775790

SABIC® PP FPC100 has been developed as a new member of the SABIC® PP FLOWPACT range dedicated to the thin wall packaging market. It is nucleated and is characterized by a high crystallization temperature and excellent flow behaviour in combination with a nice stiffness to impact balance. This grade is typically used for high-speed injection moulding and it enables very cost efficient processing on the basis of easy mould filling and very short cycle times. It has a very good antistatic performance and permitseasy demoulding.This material is typically used in thin wall packing applications both for food and non-food segments. This includes yellow fats/margarine tubs, dairy packaging and housewares. The grade has an excellent dimensional stability what is crucial for the thin wall packaging market. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.comThe product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. IMDS 80775790

SABIC® PP FPC105 has been developed as a new member of the SABIC® PP FLOWPACT solutions dedicated to the thin wall packaging market. SABIC® PP FPC105 delivers very high flow with superior stiffness - impact balance and excellent organoleptic properties. This grade is designed for high-speed injection moulding and enables very cost efficient processing with short cycle times. In addition, it has an excellent dimensional stability. It has a good antistatic performance and permits easy demoulding. It is also nucleated and phthalate & odor free.

This grade has been developed as a new member of the SABIC® PP FLOWPACT range dedicated to the rigid packaging market. It delivers a high top load performance (potential downgauging) with a superior stiffness / impact balance. It is nucleated and is characterized by a high crystallization temperature and excellent flow behavior. This grade is typically used by our customers for high-speed injection moulding and it enables very cost efficient processing on the basis of easy mould filling and very short cycle times. It has a very good antistatic performance with easy demoulding.Application: This material is typically used in rigid packaging applications for both food and non-food industries. This includes packaging for yellow fats, cheese spreads, dairy, frozen, chilled and ambient food, household chemicals, paints among others. It can be also used in several applications in the caps & closures industry as well in housewares. The grade has excellent heat deflection temperature making it may particularly be used for hot fill applications. Health, Safety and Food Contact regulation: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC-com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.

As part of SABIC® PP FLOWPACT portfolio, FPC70 delivers high top load performance (potential downgauging) with a superior stiffness / impact balance. It is nucleated and has good antistatic performance with easy demoulding. This grade has good flow behavior, and it is typically used by our customer for high-speed injection moulding process, potentially enabling very cost efficient processing on the basis of easy mould filling and very short cycle times. Applications: SABIC® PP FPC70 is typically used in rigid packaging applications for both food and non-food industries. This includes packaging for yellow fats, cheese spreads, dairy, frozen, chilled and ambient food, household chemicals and paints among others. It can be also used in several applications in the caps & closures as well in housewares. The grade has excellent heat deflection temperature making it may particularly be used for hot fill applications. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® PP FPC70T is part of the SABIC® PP FLOWPACT portfolio dedicated for thin wall packaging application. It offers very high melt flow rate along with good stiffness / impact balance enable very fast production speed while maintain good product integrity. It is designed to have good organoleptic performance to minimize potential taste and smell transfer to the food contents. SABIC® PP FPC70T also has very good impact resistance even at low temperature. This make it particularly suitable for the production of ice cream container, yoghurt tub, margarine container and other thin wall packaging for low temperature storage.

As part of SABIC® FLOWPACT polypropylene portfolio, FPC75 grade delivers high top-load performance with a very high stiffness - impact balance. This high flow phthalate free grade is nucleated, with good organoleptic and antistatic properties.

SABIC® PP FPH50 is a grade developed for thin wall packaging as well as the caps & closures market. The grade is nucleated and is characterised by a high crystallisation temperature, excellent flow behaviour in combination with a high stiffness. SABIC® PP FPH50 allows for very cost efficient processing on the basis of easy mould filling, very shortcycle times and robust processing behaviour in combination with pigments. It has a very good antistatic performance and shows easy demoulding. Application: SABIC® PP FPH50 is typically used in thin wall packing applications both for food and non-food segments. In caps and closure, the grade could be used for wide mouth caps, amongst others. In media packaging, the grade offers opportunities for cycle time optimisation. The grade has excellent heat deflection temperature making it particularly be used for hot fill applications. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.sabic.com. This product is not intended for and must not be used in any pharmaceutical/medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 7172624

SABIC® PP grades for healthcare applicationsare produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® PP PCGH19 is typically used by our customers for injection molding of healthcare applications such as caps and closures, 3-part syringes and other thin walled parts. This grade offers a high stifness combined with good flow properties. Due to its narrow molecular weight distribution it is typically used by our customers for thin walled, warpage critical applications. Compliance to regulations: SABIC® PP PCGH19 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body. IMDS 7172624

SABIC® PP grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® PP PCGR40 is a highly transparent polypropylene random copolymer with good antistatic properties. This grade combines improved aesthetics of the finished articles with low temperature processability and a very good organoleptic performance. Part aesthetics are not affected by the lower temperatures, providing for a broader operating window, enabling short cycle times. SABIC® PP PCGR40 results in excellent demoulding characteristics and has a good stiffness to impact ratio. Typical applications: SABIC® PP PCGR40 is typically used for injection moulding of housings for empty disposable 3-part syringes. Other applications demanding a high level of transparency and broad processing window are also possible. Compliance to regulations: SABIC® PP PCGR40 complies with the food contact regulations and the relevant monographs of the US Pharmacopoeia.

SABIC® PP PHC26 combines very high impact resistance, also at low temperatures, with high stiffness and offers good flow properties. Thanks to the very low tendency to warp and the excellent surface quality, SABIC® PP PHC26 is typically used in injection moulding of suitcase shells, crates & boxes and automotive parts. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. IMDS 80775790

SABIC® PP PHC27 combines very high impact resistance, also at low temperatures, with a good stiffness and offers very good flow properties. Thanks to very low tendency to warp, it is typically used for injection moulding of crates & boxes, suitcase shells and automotive parts. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 80775790

SABIC® PP PHC28 is the new development of SABICs very high impact PHC series. The grade combines very high impact resistance, also at low temperatures, with a good stiffness and offers very good flow properties. By its design it is offering potential of cycle time reduction, of down gauging and easiness of processing. PHC28 is typically used for injection moulding of applications requiring high impact from low to thick wall thickness such as suitcase shells, electronic equipment and automotive parts. SABIC® PP PHC28 is putting the combined stiffness and flow of very high impact copolymers to a next level. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® PP PHC31 combines high stiffness with good impact strength. Its excellent flow properties and narrow molecular weight distribution allows fast cycle-times and injection moulding of articles demanding low warpage and high dimensional stability. Typical applications are pails, containers, crates & boxes and automotive components. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com)IMDS ID: 80775790.

SABIC® PP PHC31-81 is a grade which combines high stiffness with good impact strength. Its excellent flow properties and narrow molecular weight distribution permits fast cycle-times and injection moulding of articles demanding low warpage and high dimensional stability. This grade is formulated with a combined processing and UV-stabilisation package. Typical applications are automotive components. It is also available in a general purpose additive package. SABIC® PP PHC31-81 is a designated automotive grade. IMDS ID: 80775790

SABIC® PP PHC60 is an impact copolymer PP developed for Thin Wall Packaging applications where higher impact performance is needed, especially for low temperature applications like frozen food. Health, Safety and Food Contact regulation: Material Safety Data Sheets (MSDS) and Product Safety declarations are available under request. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.

SABIC® PP PPA20 is an impact copolymer with an excellent optical performance – high gloss, high scratch resistance and low stress whitening. The material exhibits high flow and impact resistance combined with high stiffness. The overall properties make this grade favorable for various applications where a good balance of mechanical and optical properties are required such as home appliances, caps and closures, houseware, food and non-food rigid packaging and furniture. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® PP QR6701K is specially developed for producing injection molded & ISBM articles with very high clarity at low processing temperatures. This grade contains advanced clarifier and anti-static agent. SABIC® PP QR6701K has the following features: Consistent processability; Good stiffness; Excellent clarity; Lower energy consumption and less cycle time due to low processing temperatures.

SABIC® PP QR6711K is a PP random grade with narrow molecular weight distribution intended specifically for producing injection molded articles with high clarity. This grade contains advanced clarifier & anti-static agent. SABIC® PP QR6711K has the following features: Consistent processability; Good stiffness; Exceptional clarity; Low thickness; Low warpage; Easy to flow; Better cycle time comparing to normal PP random copolymer grades; Less energy consumption.

SABIC® PP QR672K is a highly transparent random copolymer with good antistatic properties. This grade combines good stiffness, improved aesthetics of the finished articles and low temperature processability. SABIC PP QR672K results in excellent demoulding characteristics and has a good stiffness to impact ratio. Applications: SABIC PP QR672K is mainly used in injection moulding processes . The SABIC PP QR672K aims at transparent applications ranging from injection moulded lids, caps & closures, housewares, office & home storage boxes. Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. IMDS 80775790

SABIC® PP QR6731K is specially developed for producing injection molded & ISBM articles with very high clarity at low processing temperatures. This grade contains advance clarifier and anti-static agent. SABIC® PP QR6731K has following features: Consistent processability; Good stiffness; Exceptional clarity; Lower energy consumption and less cycle time due to low processing temperatures.

SABIC® PP QR673K is a highly transparent random copolymer with good antistatic properties. This grade combines improved aesthetics of the finished articles with low temperature processability. Part aesthetics are not affected by the lower temperatures, providing for a broader operating window. The SABIC® PP QR673K results in excellent demoulding characteristics and has a good stiffness to impact ratio.Application: SABIC® PP QR673K is mainly used in injection moulding processes. The SABIC® PP QR673K aims at transparent applications ranging from injection moulded housewares, office & home storage boxes, lids to caps & closures. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) IMDS 80775790

SABIC® PP QR674K is a high melt flow index random copolymer with excellent transparency and good antistatic properties. This grade combines improved aesthetics of the finished articles with low temperature processability and a very good organoleptic performance. Part aesthetics are not affected by the lower processing temperatures, providing for a broader operating window. The SABIC®PP QR674K presents excellent flow behaviour, easy demoulding and good stiffness to impact ratio. Application: SABIC® PP QR674K is mainly used in injection moulding processes. The SABIC® PP QR674K aims at transparent applications were higher MFI’s with good flow are required. Its intended applications include injection moulded housewares, office & home storage boxes, thin wall packaging, lids and caps & closures. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. IMDS 80775790

SABIC® PP QR675K is a highly transparent random copolymer with good antistatic properties with excellent flow behaviour. This grade combines improved aesthetics of the finished articles with low temperature processability. Part aesthetics are not affected by the lower processing temperatures, providing for a broader operating window. The SABIC® PP QR675K results in excellent demoulding characteristics and has a good stiffness to impact ratio. Application: SABIC® PP QR675K is mainly used in injection moulding processes. The SABIC® PP QR675K aims at transparent applications were higher MFI’s with good flow are required. Its intended applications include injection moulded housewares, office & home storage boxes, thin wall packaging and media packaging. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 80775790

SABIC® QR6771K is a phthalate free high melt flow clarified polypropylene random copolymer grade for injection molding applications. This grade provides excellent clarity & surface gloss. It contains antistatic agent.

SABIC® PP QR678K is a very high melt flow index random copolymer with high transparency and good antistatic properties. This grade combines improved aesthetics of the finished articles with low temperature processability. Part aesthetics are not affected by the lower processing temperatures, providing for a broader operating window. The SABIC® PP QR678K presents very high melt flow rate, easy demoulding and good stiffness to impact ratio. Application: SABIC® PP QR678K is mainly used in injection moulding processes. The SABIC® PP QR678K is typically used at transparent applications were higher MFI’s with good flow are required. Its intended applications include injection moulded housewares, office & home storage boxes, thin wall packaging and media packaging. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com.The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. IMDS 80775790

SABIC® PP QR681K is a new highly transparent random copolymer grade in the blow moulding product range. Impact, transparency, stiffness are well balanced and give you the opportunity to make weight optimized blow moulding products. This grade combines improved aesthetics of the finished articles with low temperature processability. Part aesthetics are not affected by the lower temperatures, providing for a broader operating window. High transparency, contact clarity and gloss will produce appealing blow moulded bottles. These properties, combined with a high heat deflection temperature, result in a wide variety of applications where the SABIC® PP QR681K can be used. Application: SABIC® PP QR681K is used for various blow moulding processes like Extrusion Blow Moulding and Injection (Stretch) Blow Moulding. SABIC® PP QR681K applications range from household to personal care products, but the material is also very suited for food packaging where a high heat distortion could be required. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.

SABIC® PP RA12MN40 is a random copolymer medium ethylene modified, clarified and anti-static. It is typically used for injection moulding applications. Special characteristics are high stiffness, good transparancy and high gloss. Typical applications are in housewares and thin walled packaging. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 80775790

This random copolymer has a high molecular weight and therefore mainly used for extrusion. It is typically used in sheet extrusion. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. IMDS 80775790

SABIC® PP T30S is a low fluidity polypropylene homopolymer with consistent processability, easy orientation, and good mechanical properties.