Polypropylene homopolymer, 20% mineral fillers reinforced and high melt flow rate. ISPLEN® PM270 AV gives a high stiffness, and a low warpage and shrinkage behaviour. This product is UV stabilised. APPLICATIONS - Automotive: Interior trims and panels. - Technical pieces, in general.

Polypropylene homopolymer, 20% mineral fillers reinforced and high melt flow rate. ISPLEN® PM270 BV gives a high stiffness, and a low warpage and shrinkage behaviour. This product is high heat and UV stabilised. APPLICATIONS - Automotive: Under the bonnet parts subjected to high thermal stress (Light housings, heat and ventilation ducts). - Air conditioning elements inside the car. - Technical pieces, in general.

ISPLEN ® PM270XT is a homopolymer, 20% mineral fillers reinforced and high melt flow rate. It gives a high stiffness and a low warpage and shrinkage behaviour. It is high heat stabilised specially designed for low odour emission applications. APPLICATIONS - Automotive: under the bonnet parts subjected to high thermal stress (Light housings, heat and ventilation ducts). - Air conditioning elements inside the car. - Technical pieces, in general. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Polypropylene copolymer, 20% mineral fillers reinforced and with high processability. ISPLEN® PM274 AS shows high stiffness and good impact strength. It gives good aesthetic properties and high gloss surface. The product has a standard stabilization, able to be used in the main applications. APPLICATIONS - Electrical appliances and white line. - Automotive: insertion, steps, structural parts. - Technical pieces, in general.

Polypropylene copolymer, 20% mineral fillers reinforced and high melt flow rate. ISPLEN® PM274 AT shows a good compromise between impact strength and stiffness, keeping a low warpage and shrinkage behaviour. The product is high heat stabilised. APPLICATIONS - Automotive: Under the bonnet parts subjected to high thermal stress. Interior trims. - Technical pieces, in general.

Polypropylene copolymer compound, with 20% mineral fillers reinforced and medium melt flow rate. ISPLEN® PM275 AW gives a good compromise between stiffness and impact strength, a low warpage and shrinkage behaviour. The product is high UV stabilised. APPLICATIONS - Automotive: Interior trims and panels. - Technical pieces, in general.

Polypropylene copolymer compound, with 20% mineral fillers reinforced and medium melt flow rate. ISPLEN® PM275 DV shows good impact strength and a medium rigidity. The product is UV stabilised. APPLICATIONS - Automotive: Interior trims and panels. - Technical pieces, in general.

Polypropylene copolymer with 16% mineral filler reinforced. It shows very high impact strength as well as good stiffness and demoulding properties during injection moulding. The product ISPLEN® PM276 BV is UV stabilised to be used with high temperatures. APPLICATIONS Automotive: - Interior trims and panels. - Fenders. - Technical pieces, in general.

Polypropylene copolymer, 20% mineral fillers reinforced and good melt flow rate. ISPLEN® PM281 AV was designed showing a high stiffness with a good impact resistance, and a low warpage and high shrinkage behaviour. It shows really good gloss surface and a good scratch resistance. The product is UV stabilised. APPLICATIONS - Automotive: Interior trims and panels. - Electrical appliances. - Technical pieces, in general.

Polypropylene copolymer, 20% mineral fillers reinforced and good melt flow rate. ISPLEN® PM281 BV was designed showing a high stiffness with a good impact resistance, and a low warpage and high shrinkage behaviour. It shows really good gloss surface and an excellent scratch resistance. The product is UV stabilised. APPLICATIONS - Automotive: Interior trims and panels. - Electrical appliances. - Technical pieces, in general.

Polypropylene copolymer, 20% mineral fillers reinforced and good melt flow rate. ISPLEN PM281 EV was designed showing a high stiffness with a good impact resistance, and a low warpage and high shrinkage behaviour. It shows really good gloss surface and an excellent scratch resistance. The product is UV stabilised. APPLICATIONS Automotive: - Interior trims and panels. - Technical pieces, in general.

Polypropylene copolymer 20% mineral fillers reinforced and high processability. ISPLEN® PM284 AS shows high stiffness and good impact strength. It gives good aesthetic properties and high gloss surface. The product has a standard stabilization, able to be used in the main applications. APPLICATIONS - Electrical appliances and white line. - Technical pieces, in general.

Polypropylene homopolymer, 30% mineral fillers reinforced and high melt flow rate. ISPLEN PM370 AV gives a good compromise between stiffness and impact strength, a low warpage and shrinkage behaviour. This product is high heat stabilised. APPLICATIONS - Automotive: Under the bonnet parts subjected to high thermal stress (Light housings, heat and ventilation ducts), air conditioning elements inside the car - White goods: components in washing machines. - Technical pieces, in general.

Polypropylene copolymer, 30% mineral fillers reinforced and high melt flow rate. ISPLEN® PM364 AT gives a good compromise between stiffness and impact strength, a low warpage and shrinkage behaviour. The product is high heat stabilised. APPLICATIONS - Automotive: Under the bonnet parts subjected to high thermal stress (Light housings, heat and ventilation ducts), interior trims. - Technical pieces, in general.

Polypropylene copolymer with 25% mineral fillers reinforced and elastomer modified. ISPLEN® PM366 AV gives a good compromise between stiffness and impact strength, low warpage and shrinkage behaviour. The product is UV stabilised. APPLICATIONS - Automotive: Interior panels and pillars, exterior savers… - Technical pieces, in general.

Polypropylene homopolymer, 30% mineral fillers reinforced and high melt flow rate. ISPLEN PM370 AE gives a good compromise between stiffness and impact strength, a low warpage and shrinkage behaviour. This product is high heat stabilised. APPLICATIONS - Electrical appliances. - Under the bonnet parts subjected to high thermal stress. - Technical pieces, in general.

Polypropylene homopolymer, 40% mineral fillers reinforced and medium melt flow rate. ISPLEN® PM470 AT shows a high stiffness, as well as a low warpage and shrinkage behaviour. The product is high heat and chemical stabilised. APPLICATIONS - Automotive: under the bonnet parts subjected to high thermal stress (Light housings, HVAC elements), AC inserts inside the car. - Heaters and air conditioning units. - Electrical housings, power tools. - Washing machine cylinders.

Polypropylene homopolymer, 40% mineral fillers reinforced and medium melt flow rate. ISPLEN PM460 AS shows a high stiffness, as well as a low warpage and shrinkage behaviour. The product has a standard stabilization, able to be used in the main applications. APPLICATIONS - Technical pieces, in general.

Polypropylene homopolymer, 40% mineral fillers reinforced and medium melt flow rate. ISPLEN® PM470 XT shows a high stiffness, as well as a low warpage and shrinkage behaviour. The product is high heat and chemical stabilised. APPLICATIONS - Automotion: technical pieces with special geometry. - Air conditioning housing. - Electrical housings, power tools.

Polypropylene copolymer, 40% mineral filler reinforced and improved processability. ISPLEN® PM 474 AT shows a high stiffness keeping a good impact strength level. This product is high heat stabilised. APPLICATIONS - Automotive: under the bonnet parts subjected to high thermal stress (Light housings, HVAC elements), AC inserts inside the car. - Electrical housings, power tools. - Technical pieces, in general.

Polypropylene homopolymer, 40% mineral fillers reinforced and high melt flow rate. ISPLEN® PM490 AT shows a high stiffness, as well as a low warpage and shrinkage behaviour. The product is high heat stabilised. APPLICATIONS - Automotive: Under the bonnet parts subjected to high thermal stress (Light housings, HVAC elements). AC inserts inside the car. - Electrical housings, washing machine cylinders, power tools, technical pieces. - Technical pieces, in general.

Polypropylene homopolymer, 55% mineral fillers reinforced and low melt flow rate. ISPLEN® PM 750 AS shows a high stiffness, as well as a low warpage and shrinkage behaviour. This product is standard stabilised, able to be used in the main applications. APPLICATIONS - Automotive: Under the bonnet parts subjected to high thermal stress (Light housings, HVAC elements), AC inserts inside the car. - Electrical housings, power tools, sheets, washing machine cylinders. - Technical pieces, in general.

ISPLEN® PM276EV is a copolymer 16% mineral fillers reinforced. It shows a high impact resistance with an excellent scratch resistance, and good stiffness and demoulding properties during the transformation process. The product is UV stabilised. APPLICATIONS - Automotive: Interior trims and panels. - Technical pieces, in general.

Polypropylene copolymer, 20% mineral fillers reinforced and high processability. ISPLEN® PM284 AV shows high stiffness and good impact strength. It gives good aesthetic properties and high gloss surface. This product is UV stabilised. APPLICATIONS - Automotive: Interior trims and panels. - Technical pieces, in general.

ISPLEN® PP-010 X6E is a homopolymer with a high molecular weight that contains a high thermal stability formulation. Due to averagely good flow properties and very high mechanical properties is a suitable grade to be processed into pipes ADDITIVATION ISPLEN® PP-010 X6E contains stabilizers and additives according to the end-use of the item in order to reinforce the thermal stability and increase the hot-water extraction resistance. Other additives may be included by the processor. Formulation allows polymer stability during the normal conditions of processing and use. COLOURING ISPLEN grades are supplied in natural colour but they can be easily coloured with pigments steady at processing temperatures, using dry -colouring or masterbatch techniques. FOODSTUFF REGULATIONS ISPLEN® PP-010 X6E are approved for food contact under certain legislation. For more information about specific country regulation, please, contact with our local representative or the Technical Service.

ISPLEN® PP 020 G3E is a low melt flow rate polypropylene homopolymer with a reinforced formulation of thermal stabilization suitable for protecting the polymer during extrusion process and final use. His crystalline structure gives a good balance between stiffness and tensile strength resistance. TYPICAL APPLICATIONS - High tenacity strapping - Boards and Sheet extrusion - Profiles - Blow molding Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 030 G1E is a medium-low melt flow rate polypropylene homopolymer. It offers an optimum balance between mechanical and processing properties for production of monofilaments and tapes with high tensile strength at break. It is formulated with an additive package suitable for protecting the polymer during extrusion process and final use. TYPICAL APPLICATIONS - High tenacity monofilaments and tapes for ropes and twines - Tapes for textil uses - Extruded nets - Strap - Sheet extrusion - Blow molding Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 031 G1E is a medium-low melt flow rate polypropylene homopolymer. It offers an optimum balance between mechanical and processing properties for production of monofilaments and tapes with high tensile strength at break. It is formulated with an additive package suitable for protecting the polymer during extrusion process and final use. TYPICAL APPLICATIONS - High tenacity monofilaments and tapes for ropes and twines - Low fibrillation tapes for textil uses - Strap - Sheet extrusion Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Isplen® PP 034 W3F is a medium melt flow rate polypropylene homopolymer specially formulated and adapted for bioriented film extrusion (BOPP). The product is suitable for metallizable film. Rheological properties enhance orientation and give it very high break resistance in the melt, meaning that it behaves ideally during subsequent treatment. It is extremely pure and has an excellent thermal stability. It´s optical, mechanical and barrier properties are very good. It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer. TYPICAL APPLICATIONS In extrusion processes such as: - Bi-oriented film BOPP manufactured using the tenter process. - High tenacity staple yarn - Low thickness sheet extrusion Recommended melt temperature range from 210 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 040 C1E is a medium melt flow rate homopolymer specially formulated and adapted for extrusion processes and particularly in thermoforming due to its high transparency and high stiffness. It is nucleated and the properties remain even at high regrind fractions. This makes the grade recommendable in barrier sheet packing application. TYPICAL APPLICATIONS In extrusion processes such as: - Mainly in sheet extrusion and thermoforming. - Coextrusion in rigid packaging. - Others are monofilament and weaving tapes. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 040 G1E is a medium-low melt flow rate polypropylene homopolymer. It offers a good balance between mechanical and processing properties for production of tapes. It is formulated with an additive package suitable for protecting the polymer during extrusion process and final use. TYPICAL APPLICATIONS - Low fibrillation tapes for textil uses - Monofilaments and tapes for ropes and twines - Sheet extrusion and thermoforming Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Isplen® PP 040 N1E is a medium melt flow rate polypropylene homopolymer specially formulated and adapted for extrusion processes and particularly in thermoforming applications. It is nucleated so that it exhibits high stiffness, good transparency and excellent high temperature properties. It is recommended in sterilisation and hot filling. TYPICAL APPLICATIONS In extrusion processes such as: - Mainly in sheet extrusion and thermoforming. - Others are monofilament and weaving tapes. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Isplen® PP 044 W3F is a medium melt flow rate polypropylene homopolymer specially formulated and adapted for bioriented film extrusion (BOPP). The product is suitable for metallizable film. Rheological properties enhance orientation and give it very high break resistance in the melt, meaning that it behaves ideally during subsequent treatment. It is extremely pure and has an excellent thermal stability. It´s optical, mechanical and barrier properties are very good. It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer. TYPICAL APPLICATIONS In extrusion processes such as: - Bi-oriented film BOPP manufactured using the tenter process. - High tenacity staple yarn - Low thickness sheet extrusion Recommended melt temperature range from 210 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 045 G1E is a medium melt flow rate polypropylene homopolymer. It offers excellent processing properties for production of tapes and monofilaments. It is formulated with an additive package suitable for protecting the polymer during extrusion process and final use. TYPICAL APPLICATIONS - Low fibrillation tapes for textil uses - Monofilaments and tapes for ropes and twines - Extrusion general uses Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 050 Y1E is a medium melt flow rate polypropylene homopolymer with a molecular weight distribution which provides optimum balance between processing and mechanical properties in the latest generation staple fiber lines. It includes a specific formulation resistant to "gas fading" coloration, suitable for protecting the polymer during extrusion process and final use. TYPICAL APPLICATIONS - Specially recommended for staple fibre and multifilament extrusion in high speed equipment. - Suitable for tapes and monofilament Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 060 G1M is a polypropylene homopolymer with a medium-low fluidity intended for injection moulding applications that require fair impact resistance balanced with the typical stiffness of a homopolymer. ISPLEN® PP 060 G1M is easy to process with standard injection moulding machines in a wide range of temperatures depending on wall thickness, the shape of the piece and other design parameters. Articles manufactured with this grade have excellent chemical resistance, are easily decorated and can accept different colouring systems. TYPICAL APPLICATIONS ISPLEN® PP 060 G1M is used for injection moulding consumer goods such us: - Caps, lids and closures. - Components for spray dispensers. - Cool boxes. - Rigid packaging. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 064 S1F is a homopolymer polypropylene with medium melt flow rate. Its specific formulation (antiblocking, slip and antistatic) makes its procesability and rheological properties particularly suitable (pure or blended) for film transformation in high speed equipment. Films prepared with ISPLEN® PP 064 S1F have high mechanical properties, and are normally used for packaging (foodstuffs, textiles, stationery, organizational office aids, etc.). It is specially indicated for non-oriented film extrusion and has excellent optical, mechanical and barrier properties. TYPICAL APPLICATIONS Non-oriented film extrusion processes, cast or tubular quench, such as: - Single layer film - Internal layers of co-extruded cast films - Packaging of foodstuffs and non-food stuffs - Stationery and textile packaging Recommended melt temperature range from 190 - 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 064 W1F is a homopolymer polypropylene with medium melt flow rate. This product does not contain slip, antiblock additives neither Ca-stearate. The product is suitable for metallizable film. Its structural characteristics and specific additivation make its processability and rheological properties especially suitable (pure or blended) for film transformation in high-speed equipment. It is specially indicated for non-oriented film extrusion and provides excellent optical, mechanical and barrier properties. Excellent metal adhesion. TYPICAL APPLICATIONS Non oriented film extrusion processes, cast or tubular quench, such as: - Metallizable cast film. - Core-layer in co-extruded cast films - Packaging of foodstuffs and non-food stuffs - Stationery and textile packaging Recommended melt temperature range from 190 - 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 070 G2M is a polypropylene homopolymer with a medium fluidity intended for injection moulding. It is characterised by good flow properties that enables to fill the mould easier. Articles manufactured with this grade have excellent chemical resistance, are easily decorated and can accept different colouring systems. TYPICAL APPLICATIONS ISPLEN® PP 070 G2M is widely used for the production of consumer goods such us: - Food containers and rigid packaging. - Toys and small appliances. - Caps and closures. Recommended melt temperature range from 210 to 250°C. Processing conditions should be optimised for each production line.

Polypropylene homopolymer with high melt flow rate for injection applications. ISPLEN® PP 080 A shows a high stiffness and a low warpage shrinkage behaviour. This product is standard stabilised and also antistatic formulated. APPLICATIONS - Small domestic containers. - Rigid packages. - Small boxes for cosmetic. - Gardens furniture.