SA233CF is a very soft random heterophasic copolymer. This grade is suitable for use on conventional blown film lines with air cooling. CAS-No. 9010-79-1

SB376 is a polypropylene compound intended for injection moulding. Applications SB376 has been developed especially for the car industry to be used in automotive exterior parts. - Automotive exterior applications Special features - Good stiffness and impact balance - UV stabilised

SC101 is a 20% mineral filled polypropylene compound intended for injection moulding. Applications - Air ducts - Appliances Special features - Very good stiffness and impact balance - Very good heat stabilised - Very good dimensional stability - Very good chemical resistance

SC158 - is a 20% mineral filled polypropylene compound intended for injection moulding. Applications SC158 has been developed especially for the car industry to be used in automotive interior parts. Automotive interior applications Special features - Good stiffness - Good chemical resistance - Dimension stability

SD233CF is a very soft random heterophasic copolymer. This grade is suitable for the manufacturing of unoriented films on chill roll processes. CAS-No. 9010-79-1

SP968 is a polypropylene compound intended for injection moulding. Applications SP968 has been developed especially for the car industry to be used in automotive interior parts. Interior trims Special features - High crystallinity - Stabilised according to UV requirements from the automotive industry

SR533 is a polypropylene compound intended for injection moulding. Applications SR533 has been developed especially for the car industry to be used in automotive exterior parts. - Bumpers Special features - Good stiffness and impact balance - Good impact performance for low temperature applications

SR552 is a 10% mineral filled polypropylene compound intended for injection moulding. Applications SR552 has been developed especially for the car industry to be used in automotive exterior parts. - Bumpers Special features - High impact strength - Good UV resistance - Low shrinkage

SR562 is a polypropylene compound intended for injection moulding.

SR576 is a polypropylene compound intended for injection moulding.

TB331 is a 30% mineral filled polypropylene compound intended for injection moulding. Applications TB331 has been developed especially for demanding applications in the automotive industry. - Interior trims - Front grills - Exterior trims Special features - Very good mechanical properties

TD210BF is a C2/C4 terpolymer This grade is designed for sealing layers of oriented and non oriented films CAS-No. 25895-47-0

TD215BF is a C2/C4 terpolymer This grade is designed for sealing layers of oriented and non oriented films CAS-No. 25895-47-0

TD310BF - is a C2/C4 terpolymer This grade is designed for sealing layers of oriented and non oriented films CAS-No.: 25895-47-0 Applications TD310BF is recommended for: - Lamination films - Sealing layer in coextrusion - Food packaging Additives TD310BF contains antiblock but no slip agent Special features TD310BF is optimised to deliver: - High seal strength and hot tack force - Lowest volatiles and fumes during processing - Wide sealing window - Good stability of surface tension - Optimised balance between high melting point for easy processing and low sealing temperature - Metallisable - Low taste & odour - Excellent optical properties - Low content of amorphous polymer

TD315BF is a C2/C4 terpolymer This grade is designed for sealing layers of oriented and non oriented films CAS-No.: 25895-47-0 Applications TD315BF is recommended for: - Sealing layer in coextrusion - Food packaging - Lamination films Additives TD315BF contains antiblock and slip agents Special features TD315BF is optimised to deliver: - Lowest volatiles and fumes during processing - High seal strength and hot tack force - Low content of amorphous polymer - High sealing window - Low taste & odour - Excellent optical properties - Excellent printability - Optimised balance between high melting point for easy processing and low sealing temperature - Good stability of surface tension

TD320BF - is a C2/C4 terpolymer This grade is designed for sealing layers of oriented and non oriented films CAS-No.: 25895-47-0 Applications TD320BF is recommended for: - Sealing layer in coextrusion - Lamination films - Food packaging Additives TD320BF contains antiblock but no slip agent Special Features TD320BF is optimised to deliver: - Metallisable - Excellent printability - Optimised balance between high melting point for easy processing and low sealing temperature - Good stability of surface tension - Excellent optical properties - Lowest volatiles and fumes during processing - High seal strength and hot tack force - Low content of amorphous polymer - Wide sealing window - Low taste & odour

TR529 is a 10% mineral reinforced impact modified polypropylene compound suitable for injection moulding.

VC105 is a 40% mineral filled polypropylene compound intended for injection moulding. Applications VC105 has been developed especially for the car industry to be used in automotive interior parts. - Air ducts Special features - Very good chemical resistance - Very good dimensional stability - Very good stiffness - High heat stabilised

Fibremod VG602 is a 20% chemically coupled glass fibre reinforced polypropylene compound intended for injection moulding. Applications Fibremod VG602 has been developed especially for the car industry to be used in automotive interior parts. - Fans and shrouds - Air filters Special features - Very good stiffness - Excellent mechanical properties even at high tempertures - Very good dimensional stability

Fibremod VG621 is a 30% chemically coupled glass fibre reinforced polypropylene compound intended for injection moulding. Applications Fibremod VG621 has been developed especially for the car industry to be used in automotive interior parts. - Automotive interior applications - Air filters - Fans and shrouds Special features - Very good stiffness - Very good dimensional stability

WG320C is a polypropylene for extrusion coating. CAS-No.: 9002-88-4 CAS-No.: 9003-07-0 Applications WG320C is designed for: - Micro wave oven applications - Coating of textile fibres - Pinholes free coating - Coating of various plastic films and cellophane - Extrusion coating of high volume production of boards and papers - Paper lamination films - Coating and lamination of aluminium foil Special Features WG320C is optimised to deliver: - Excellent processing properties - High temperature resistance - High grease resistance

WG341C is a polypropylene for extrusion coating. CAS-No.: 9002-88-4 CAS-No.: 9003-07-0 Applications WG341C is designed for: - Micro wave oven applications - Coating of textile fibres - Extrusion coating of high volume production of boards and papers - Pinholes free coating - Coating of various plastic films and cellophane Special Features WG341C is optimised to deliver: - Excellent processing properties - High temperature resistance - High grease resistance

WG350C is a polypropylene for extrusion coating. WG350C is a filled polypropylene compound for extrusion coating. It can be used in standard extrusion coating lines although it is recommended to pre-dry WG350C before extrusion in order to avoid die build up. Standard conditions for drying are 90 °C / 4 hours. CAS-No.: 9002-88-4 CAS-No.: 9003-07-0 Applications WG350C is recommended for: - Coated film - Peel layer for sterilisable food packaging - Coating and lamination of aluminium foil Special Features WG350C is optimised to deliver: - Seal- and peelable against Polypropylene

WH107AE is a 13% mineral filled elastomer modified polypropylene compound intended for injection moulding. This material has an excellent balance between impact strength and stiffness and gives a good surface quality. Applications WH107AE has been developed especially for the car industry to be used in automotive exterior parts. - Bumpers - Body side mouldings - Rocker panels - Body panels Special Features - Excellent scratch resistance - Available with and without UV-stabilisation - Excellent surface appearance on unpainted and grained parts

Daplen WH107AEB is a 13% mineral filled elastomer modified polypropylene compound intended for injection moulding. Applications Daplen WH107AEB has been developed especially for the car industry to be used in automotive exterior parts. - Bumpers Special features - Excellent surface appearance on unpainted and grained parts - Excellent scratch resistance parts - High impact strength - UV stabilised - Excellent flowability

XR557 is a Mineral filled polypropylene compound intended for extrusion moulding. The product is 10% Mineral filled. Applications - Corrugated pipes - Extrusion of conduit pipes Special features - Good stiffness and impact balance - Improved high thermal stability - High impact strength

ZC011 is a Mineral filled polypropylene compound intended for extrusion moulding. The product is 30% Mineral filled.

ZC135 is a Mineral filled polypropylene compound intended for extrusion moulding. The product is 20% Mineral filled. Applications ZC135 has been developed especially for the automotive industry. - Sheets and profiles Special features - Good stiffness and impact balance - High heat stabilised

ZP961 is a polypropylene copolymer intended for injection moulding and blow moulding. Applications ZP961 has been developed especially for the car industry to be used in automotive exterior parts. - Break fluid reservoirs Special features - Very good stiffness - Very good chemical resistance - Very good dimensional stability - Very good heat deformation resistance