Description Borcycle™ MF1981SY-95 is a Post-Consumer Recycled (PCR) compound with around 10% talc, supplied in pellet form for high-end applications mainly in the appliance industry. Borcycle MF1981SY is an ideal PCR solution used where sustainability and circularity matter. It is not intended for use in food contact, potable water contact, pharmaceutical and medical applications. Applications Borcycle MF1981SY-95 offers excellent mechanical performances on top of very good optical properties. It is used in application like - Vacuum cleaners and other small appliances - Visible and non-visible applications in white goods - Structural parts Special Features - Over 80% Post Consumer Recyclate made from used plastic scrap - Good impact performance - Good aesthetical properties - Colour: black - Shape: cylindrical pellets

Description Borcycle™ UF582SA-90 is a high gloss, white compound with 55% advanced Post-Consumer Recycled (PCR) content, supplied in pellet form for high-end applications mainly in the appliance industry. This product is an ideal PCR solution used where sustainability and circularity matter. It is not intended for use in food contact, potable water contact, pharmaceutical and medical applications. Due to the nature of recyclates, some variation in colour can be observed between batches. Applications Borcycle UF582SA-90 offers excellent mechanical performances on top of very good optical properties. It is used in applications like: - Small appliances - White goods - Rigid applications Special Features - 55% Post-Consumer Recyclate made from used plastic scrap - Good stiffness performance - Excellent aesthetical properties - Excellent antistatic performance - High heat resistance - Colour: White

BJ400HP is a special low viscosity polypropylene compound developed to fit the production of PP-GF composites in the direct LFT compression and injection moulding process as well as in combination with LGF concentrates on the injection moulding process. The product is available in natural colour. Applications BJ400HP has been developed especially for applications like: - Front end carriers - Door module carriers - Under body shieldings - Dashboard carriers - Battery supports Special Features BJ400HP is designed especially for low emissions and organoleptic properties.

Daplen EE002AE is a reactor elastomer modified polypropylene intended for injection moulding. The product is available in natural colour. This material has excellent balanced mechanical properties and gives a good surface quality. This grade is additionally available in an emission optimized version (Daplen EE002AE-AR) with the same technical properties. Applications Daplen EE002AE has been developed especially for the car industry to be used in automotive exterior parts. - Bumpers - Exterior trims - Automotive exterior applications

Daplen EE189HPB is a 16% mineral filled polypropylene compound intended for injection moulding. Applications Daplen EE189HPB has been developed especially for the car industry to be used in automotive interior parts. - Dashboards - Door panels and pockets Special features - Excellent stiffness and impact balance - No tendency to show stickiness after outdoor exposure - High scratch resistance

EF015AE is a reactor elastomer modified polypropylene intended for injection moulding. The product is available in natural colour. This material has excellent balanced mechanical properties and gives a good surface quality. Applications EF015AE has been developed especially for applications like: - Bumpers - Spoilers - Exterior trims - Automotive exterior applications Special Features - Excellent surface appearance - High flowability

FR4850 is a halogen free flame retardant polypropylene compound for Primary Automotive Wire. Applications FR4850 is intended for use as a 125 °C rated primary insulation for automotive thin wall wires of 1.5 mm² or 16 AWG conductors and finer. Specifications FR4850 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - SAE J1128/J1127 - GMW15626 - Chrysler MS-12441 - Ford ES-AU5T-1A348-AA - ISO 6722

FR4852 is a halogen free flame retardant polypropylene compound for Primary Automotive Wire. Applications FR4852 is intended for use as a 125 °C rated primary insulation for automotive thin wall wires of 2,5 mm² or 14 AWG conductors and larger. Specifications FR4852 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - SAE J1128/J1127 - GMW15626 - Chrysler MS-12441 - Ford ES-AU5T-1A348-AA - ISO 6722

KSR4525 is a reactor elastomer modified polypropylene intended for injection moulding. The product is available in natural colour. This material has excellent balanced mechanical properties and gives a good surface quality. Applications KSR4525 has been developed especially for the car industry to be used in automotive exterior parts. - Bumpers - Exterior trims Special Features - UV stabilised

MB350WG is a 30% mineral filled polypropylene compound intended for injection moulding. This material has a very high impact strength while maintaining good stiffness and is easy to process. Applications MB350WG has been developed especially for applications like: - Washing machine parts - Dishwashers components Special Features - Long term high heat stabilised - Detergent resistant - UL registered under File E108112 - Excellent dimensional stability

MB352WG is a 30% mineral filled polypropylene compound intended for injection moulding. Applications MB352WG has been developed especially for applications like: - Washing machine parts - Dishwashers components Special Features - Excellent stiffness and impact balance - UL registered under File E108112 - Excellent dimensional stability

MB471WG is a 40% mineral filled polypropylene compound intended for injection moulding. This material has excellent balanced mechanical properties and is easy to process. Applications MB471WG has been developed especially for applications like: - Dishwashers components - Washing machine parts Special Features - Long term high heat stabilised - Detergent resistant - UL registered under File E108112 - Excellent dimensional stability

MD206U is a 20% mineral filled polypropylene compound intended for injection moulding. This material has an excellent balance between impact strength and stiffness and gives a good surface quality. Applications MD206U has been developed especially for applications like: - Door panels and pockets - Other automotive parts - Cowl vent grilles Special Features - UV stabilised

MD231U is a 20% mineral filled polypropylene compound intended for injection moulding. This material has excellent balanced mechanical properties and a medium melt flow rate. Applications MD231U is designed for: - Air ducts - Air conditioning parts - Air filters - Automotive under the bonnet parts Special Features - Long term high heat stabilised - High dimensional stability - UL registered under File E108112 - Low shrinkage

MD360HP is a 30% mineral filled polypropylene compound intended for injection moulding. Applications MD360HP has been developed especially for exterior applications needing good UV resistance: - Exterior applications in the construction and building industry - Exterior automotive parts

MD441AI is a 40% mineral filled polypropylene compound intended for injection moulding. This material has excellent balanced mechanical properties and a medium melt flow rate. Applications MD441AI is designed for: - Air conditioning parts - Automotive interior applications - Heater housings Special Features - Excellent dimensional stability - Low shrinkage - Excellent high purity

MD441U is a 40% mineral filled polypropylene compound intended for injection moulding. This material has excellent balanced mechanical properties and a medium melt flow rate. Applications MD441U is designed for: - Air conditioning parts - Under the bonnet components - Heater housings Special Features - Long term high heat stabilised - UL registered under File E108112 - Excellent dimensional stability - Low shrinkage

ME212U is a 20% mineral filled polypropylene compound intended for injection moulding. This material has excellent balanced mechanical properties and is easy to process.

ME212WS is a 20% mineral filled polypropylene compound intended for injection moulding. The product is available in standard black 9502. Applications ME212WS has been developed especially for applications like: Automotive under the bonnet parts Special Features - High heat stabilised - The product is available in black.

ME266U is a 20% mineral filled polypropylene compound intended for injection moulding. This material has an excellent balance between impact strength and stiffness and gives a good surface quality. Applications ME266U has been developed especially for the car industry to be used in automotive interior parts. - Pillar trims - Automotive interior applications - Door panels and pockets

ME268AI is a 20% mineral filled polypropylene compound intended for injection moulding. Applications ME268AI has been developed especially for the car industry to be used in automotive interior parts. - Dashboards - Other automotive interior parts - Pillar trims Special Features - No tendency to show stickiness after outdoor exposure

ME466WG is a 40% mineral filled polypropylene compound intended for injection moulding. The product is available in 9020 white. Applications - Tubs for washing machines - Basement for washing machines, dishwashers and dryers - Washing machine parts Special Features ME466WG has been developed especially for the white goods industry.

MS64T20 is a 20% mineral filled polypropylene compound intended for injection moulding. This material has excellent balanced mechanical properties and is easy to process. Applications MS64T20 has been developed especially for the automotive industry. - Cowl vent grilles - Automotive exterior applications - Automotive interior applications

PP4874 is a polypropylene compound intended for the solid insulation of data cables. Applications PP4874 is designed for high performance Unshielded Twisted Pair (UTP) data cables where short lay length and high twisting speed demand superior insulation hardness. The product exhibits high speed extrusion and provides process stability with regard to diameter and geometry, providing good conductor adhesion. PP4874 is not intended as a telephone insulation for external applications. It is not intended for use in contact with petroleum jelly and has not been tested against the demanding high temperature (105°C) petroleum jelly ageing requirements typically specified for such cables Specifications PP4874 meets the following material classification: - ISO 1873-1, KGHN, 1605-D022/045 - ASTM D 4101 - 11,PP0120B77000 E11 The following cable material standards are met by PP4874: - EN 50290-2-25 Cables manufactured with PP4874 using sound extrusion practice normally comply with the following cable product standards: - EN 50288 - IEC 61156

PS65T20 is a 20% mineral filled polypropylene compound intended for injection and back injection moulding. This material has excellent balanced mechanical properties and high melt flow rate. Applications PS65T20 has been developed especially for the car industry to be used in automotive interior parts. - Trunk claddings - Automotive interior applications

QB341 is a 10% mineral filled polypropylene compound intended for injection moulding. Applications QB341 has been developed especially for the automotive industry. - Under the bonnet components - Automotive exterior applications Special features - UV stabilised - Good stiffness and impact balance

QB370 is a 30% mineral filled polypropylene compound intended for injection moulding.

QB377 is a 12% mineral filled polypropylene compound intended for injection moulding. Applications QB377 has been developed especially for the white goods industry. Special features - High flow - High stiffness

RB344 is a 10% mineral filled polypropylene compound intended for injection moulding. Applications RB344 has been developed especially for the car industry to be used in automotive interior parts. - Interior trims - Pillar trims Special features - Good combination of stiffness and surface aesthetics - Good toughness

RB354 is a 20% mineral filled polypropylene compound intended for injection moulding. Applications RB354 has been developed especially for the white goods industry. - Lids - Covers Special features Very good combination of stiffness and surface aesthetics

RB361 is a 20% mineral filled polypropylene compound intended for injection moulding.

RB363 is a 20% mineral filled polypropylene compound intended for injection moulding. Applications RB363 has been developed especially for the automotive industry. - Automotive exterior applications - Automotive interior applications Special features - Good stiffness - Excellent surface appearance - Good scratch resistance

RC007 is a 40% mineral filled polypropylene compound intended for injection moulding. Applications RC007 has been developed especially for the automotive industry. - Automotive interior applications - Engine covers - Under the bonnet components Special features - High stiffness - Improved high thermal stability

RC101 is a 20% mineral filled polypropylene compound intended for injection moulding. Applications RC101 has been developed especially for the car industry to be used in automotive interior parts. - Interior trims - Automotive interior applications Special features - Very good combination of impact, stiffness and surface aesthetics

RC196 is a 30% mineral filled polypropylene compound intended for injection moulding.

RF365MO is a specially modified highly-transparent polypropylene random copolymer with medium melt flow rate. It is designed for high-speed injection moulding and contains nucleating and demoulding additives. Products originating from this grade have excellent transparency, very good organoleptic properties, good balance of stiffness and impact strength at ambient temperature, low blooming and good demoulding properties. Applications - Closures - Thin wall containers Special features - Improved gloss and excellent transparency - Excellent antistatic properties - Good impact strength - High stiffness

RF366MO is a specially modified highly-transparent polypropylene random copolymer with medium melt flow rate. This grade is designed for high-speed injection moulding and contains nucleating and antistatic additives. The improved processability, even at low melt temperature, allows energy savings and faster cycle time. Products originating from this grade have excellent transparency, good organoleptic properties, good balance of stiffness and impact strength at ambient temperatures. These properties, together with high gloss, make this grade excellent choice for household and packaging articles. RF366MO can be also used in injection stretch blow moulding (ISBM). RF366MO is intended for injection moulding applications requiring excellent transparency - Thin wall packaging - Houseware containers - Caps and closures - Sweet-boxes - Cosmetics - Appliances - Baby bottles Special Features: - Outstanding optical properties - Improved gloss and excellent transparency - Very good processability - Good organoleptic properties

RP970 is a polypropylene compound intended for injection moulding. Applications RP970 has been developed especially for the car industry to be used in automotive interior parts. - Interior trims - Covers Special features - Good stiffness and impact balance - Very good flow

SB376 is a polypropylene compound intended for injection moulding. Applications SB376 has been developed especially for the car industry to be used in automotive exterior parts. - Automotive exterior applications Special features - Good stiffness and impact balance - UV stabilised

SC101 is a 20% mineral filled polypropylene compound intended for injection moulding. Applications - Air ducts - Appliances Special features - Very good stiffness and impact balance - Very good heat stabilised - Very good dimensional stability - Very good chemical resistance