As an alternative to high priced, non-durable high carbon formulas, DuraSurf™ 2001 DuraJet provides a blacker, faster alternative to our standard black base, without surrendering it's durability. The extremely high grade carbon also eliminates "bleeding" into other colors in die cut bases.

Since 1991, our standard product has become the industry standard for sintered base material. In that time, nearly every snowboard produced in North America using screen printed sintered base has been made with DuraSurf™ 2001. As the leader and driving force behind the colored base phenomenon, DuraSurf™ 2001 is currently available in over 130 Pantone colors, with complete Pantone color matching capability available including fluorescents and metallics.

As an alternative to high priced, non-durable high carbon formulas, DuraSurf™ 4001 DuraJet provides a blacker, faster alternative to our standard black base, without surrendering it's durability. The extremely high grade carbon also eliminates "bleeding" into other colors in die cut bases.

A higher molecular weight version of our standard product, DuraSurf™ 4001 takes an already industry-best durability to an even greater level. Without a doubt the toughest material on the hill, DS4001 is the choice of the most extreme riders! As the leader and driving force behind the colored base phenomenon, DuraSurf™ 4001 is currently available in over 130 Pantone colors, with complete Pantone color matching capability available including fluorescents and metallics.

Crown Plastics DuraSurf™ ASC is an Anti-Static/Conductive UHMW that possesses the highest level of conductivity in the industry with a surface resistivity of 10² - 10³. DuraSurf™ ASC protects against static build up that can occur in powder conveying and dust collection as well as provide protection in electronics applications such as appliance, mail sorting, copiers, printers and computers. Eliminating static reduces safety concerns in a wide array of industries. Dust collection hoppers are virtual combustion chambers. A static shock could ignite airborne particles creating an explosion. These volatile areas can be made much safer by lining them with DuraSurf™ ASC, available in wear strips or with adhesive backing. AVAILABLE THICKNESS .005" (.125 mm), .010" (.25 mm), .015"(.38 mm), .020" (.5 mm), .031" (.75 mm), .040" (1 mm), .050" (1.3 mm), .062" (1.57 mm), .080" (2 mm) .093" (2.35 mm), 100" (2.5 mm), .125" (3.17 mm) AVAILABLE WIDTHS All dimensions between 1/4" (6.35 mm) and 24" (610 mm) UHMW PROPERTIES - Excellent abrasion and wear resistance - Very high impact strength - Meets FDA and USDA guidelines - No moisture absorption - Self-lubricating - no need for oils or lubricants - Excellent noise abatement properties - Chemical resistance and corrosion resistant - Maintains performance and properties at -30°C - Meets ASTM-D-4020-81 - Low coefficient of friction

Crown Plastics DuraSurf™ BSR tapes are specifically designed to meet the demands of the automotive industry to help eliminate Buzz, Squeak and Rattle issues with auto interiors. DuraSurf™ BSR helps eliminate wear and noise between dissimilar materials, eliminate warranty issues, allow movement in adjoining parts, protect painted surfaces, reduce marring, help extend vehicle life, is easily die-cuttable and can fit into existing designs. The DuraSurf™ BSR tapes are tested to all of the major automotive specifications including GM9985804, GM6419M, Ford ESB-M3G123-B and Chrysler MS-CH612. AVAILABLE THICKNESS .005" (.125 mm), .010" (.25 mm), .015" (.38 mm), .020" (.5 mm) AVAILABLE WIDTHS All dimensions between 1/4" (6.35 mm) and 24" (610 mm) UHMW PROPERTIES - Excellent abrasion and wear resistance - Very high impact strength - Meets FDA and USDA guidelines - No moisture absorption - Self-lubricating - no need for oils or lubricants - Excellent noise abatement properties - Chemical resistance and corrosion resistant - Maintains performance and properties at -30°C - Meets ASTM-D-4020-81 - Low coefficient of friction

DuraSurf™ E801 is a high transparency HDPE extruded running surface with a molecular weight of 300,000 g/mole for silkscreen printing for ski and snowboard construction. Product Thickness Range: 0.5 mm up to 1.5 mm Product width range: 50 mm up to 750 mm Sanding: One side, standard. Two side, optional Surface Treatment: Two side standard. One side, optional.

DuraSurf™ E901 is an extruded HDPE running surface with a molecular weight of 500,000 g/mole for pigmented base in ski and snowboard construction. Product Thickness Range: .5 mm up to 1.5 mm Product width range: 50mm up to 750 mm Sanding: One side, standard. Two side, optional Surface Treatment: Two side standard. One side, optional Color: Black, white, and natural standard. Others optional.

Crown Plastics standard line of Easy-To-Apply wear strips and adhesive backed tapes. Each tape product offers excellent abrasion resistance, low coefficient of friction, high impact strength and high performance properties people have come to expect from UHMW. By providing this exceptional material with an adhesive backing, installation time and costs are significantly reduced. No need for bolts or fasteners, no need to countersink. As a matter of fact, DuraSurf™ ETA also reduces scrap by 75%. When a standard 1/4" thick sheet of UHMW is installed using the traditional mechanical fastening method, 3/16" of the material is lost to the bolt head. This leaves only a 1/16" usable wear surface. You can achieve the same result with a 1/16" DuraSurf™ ETA tape product and eliminate 80% of the time and cost associated with traditional installation methods. Crown Plastics offers a wide range of both rubber and acrylic based adhesive systems to meet virtually any application requirement. AVAILABLE THICKNESS .005" (.125 mm), .010" (.25 mm), .015"(.38 mm), .020" (.5 mm), .031" (.75 mm), .040" (1 mm), .050" (1.3 mm), .062" (1.57 mm), .080" (2 mm) .093" (2.35 mm), 100" (2.5 mm), .125" (3.17 mm) AVAILABLE WIDTHS All dimensions between 1/4" (6.35 mm) and 24" (610 mm) UHMW PROPERTIES - Excellent abrasion and wear resistance - Very high impact strength - Meets FDA and USDA guidelines - No moisture absorption - Self-lubricating - no need for oils or lubricants - Excellent noise abatement properties - Chemical resistance and corrosion resistant - Maintains performance and properties at -30°C - Meets ASTM-D-4020-81 - Low coefficient of friction

DuraSurf™ Galleria sintered running surface has evolved into the world's leading sublimated base product. Our cleaner, deeper, flatter sublimation process has provided unlimited artistic possibilities to over 500,000 snowboards worldwide.

DuraSurf™ STS is a revolutionary product in that it not only possesses a Silicone Treated Surface, but is also available with an adhesive backing for easy installation. The very low coefficient of friction provides a lubricated surface that is virtually maintenance free. DuraSurf™ STS is an ideal solution for many applications in the package handling industry such as chute linings, slider beds, slides, spirals and numerous other areas where packages can get lodged or damaged. DuraSurf™ STS also helps reduce jamming and keep packages moving smoothly to their ultimate destination. DuraSurf™ STS is also static dissipative to prevents static shocks and potential damage to bar coding systems. DuraSurf™ STS is uniquely available with an adhesive backing to provide easy installation and eliminate the need for mechanical fastening. Die cutting is also available for washers, bushings, wear pads and anti-friction surfaces. AVAILABLE THICKNESS .031" (.75 mm), .062" (1.57 mm), .093" (2.35 mm), .125" (3.17 mm) AVAILABLE WIDTHS All dimensions between 1/4" (6.35 mm) and 24" (610 mm) UHMW PROPERTIES - Excellent abrasion and wear resistance - Very high impact strength - Meets FDA and USDA guidelines - No moisture absorption - Self-lubricating - no need for oils or lubricants - Excellent noise abatement properties - Chemical resistance and corrosion resistant - Maintains performance and properties at -30°C - Meets ASTM-D-4020-81 - Low coefficient of friction

DuraSurf™ SW 2001 is a sintered UHMWPE sidewall material with a molecular weight of 2,300,000+ g/mole used in ski and snowboard construction.

DuraSurf™ UV is a UHMW blend specifically designed to meet the rigors and harsh environments of the outdoors. Standard UHMW materials are not UV stable and can break down over time due to exposure. DuraSurf™ UV has the highest UV stability in the industry and can last up to 10 times longer in the outdoors than standard UHMW products. DuraSurf™ UV is available in a standard wear strip or can be supplied with an adhesive backing for easy installation. A wide range of adhesive systems are available designed to meet virtually any application. AVAILABLE THICKNESS .005" (.125 mm), .010" (.25 mm), .015"(.38 mm), .020" (.5 mm), .031" (.75 mm), .040" (1 mm), .050" (1.3 mm), .062" (1.57 mm), .080" (2 mm) .093" (2.35 mm), 100" (2.5 mm), .125" (3.17 mm) AVAILABLE WIDTHS All dimensions between 1/4" (6.35 mm) and 24" (610 mm) UHMW PROPERTIES - Excellent abrasion and wear resistance - Very high impact strength - Meets FDA and USDA guidelines - No moisture absorption - Self-lubricating - no need for oils or lubricants - Excellent noise abatement properties - Chemical resistance and corrosion resistant - Maintains performance and properties at -30°C - Meets ASTM-D-4020-81 - Low coefficient of friction