DOW HDPE 05962B is a High Density Polyethylene produced via SOLUTION™ technology. This resin presents a narrow molecular weight distribution that offers excellent impact resistance in rigid packaging, high gloss, excellent stiffness and processability. Main Characteristics - Resin for Injection Molding - Pails and Crates - Resin for Cast film - Film for diapers, femine hygiene Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.1a - EU, No 10/2011 Consult the regulations for complete details

DOW HDPE 08454N Resin is a narrow molecular weight distribution copolymer designed to offer excellent impact strength and toughness with good stiffness. This resin has good processability over a wide range of molding conditions. - For structural foams, industrial containers, cases/crates - Excellent impact strength, toughness and good stiffness Complies with: - Canadian HPFB No Objection (With Limitations) - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520 (c) 3.2a - U.S. FDA-DMF - U.S. USP Consult the regulations for complete details.

- For toys and housewares - Good low temperature impact strength, gloss and excellent toughness - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. Consult the regulations for complete details. DOW HDPE 17450N is a narrow molecular weight distribution copolymer designed to offer low temperature impact strength and gloss with excellent toughness. This resin has good processability over a wide range of molding conditions.

POLYETHYLENE HIGH DENSITY 25055E High Density Polyethylene Resin is a very narrow molecular weight distribution resin, developed to impart excellent mechanical properties, high gloss and high surface finishing to injection moulded parts, while providing easy processing. Applications: - Housewares - Food containers - Toys Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520 - Canadian HPFB (No Objection) Consult the regulations for complete details.

HDPE 35054L is a bimodal High Density Polyethylene intended for Blow Molding applications. This resin exhibit a good balance of mechanical properties and a very high Environmental Stress Cracking Resistance (ESCR). Applications: - Containers for: -- Household & industrial chemicals (e.g. detergents and softeners) -- Personal care products and Cosmetics -- Food products -- Lubricants -- Car care products -- Toys -- Automotive Parts Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a Consult the regulation for complete details

HDPE 35057L is a Bimodal High Density Polyethylene intended for Blow Molding applications. This resin exhibit a good balance between stiffness and Environmental Stress Crack Resistance (ESCR). It is especially suitable for the production of bottles, containers and technical hollow articles Applications: - Containers for: -- Household & industrial chemicals (e.g. detergents and softeners) -- Personal care products and Cosmetics -- Food products -- Mineral oils -- Car care products - Toys - Automotive parts Complies with: - FDA regulation 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

DOW™ HDPE 35060A is a High Density Polyethylene resin produced in the Slurry Process. This resin presents good impact and environmental stress cracking resistance. Its high density allows reducing the weight of the container while maintaining good rigidity. Main Characteristics: - Used in the production of jars for detergents, mineral oils, cleaning products, food, cosmetics - Containers - Toys - Parts for cars Complies with: - U.S. FDA 21 177 1520 (c) 3.2a - EU, No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

HDPE 35060L is a High Density Polyethylene intended for Blow Molding applications. The bimodal molecular weight distribution of this resin leads to a high environmental stress crack resistance without sacrificing the rigidity (density). Its high density allows for weight reduction keeping the container performance. It is especially suitable for the production of bottles, containers and technical hollow articles Applications: - Containers for: -- Household & industrial chemicals (e.g. detergents and softeners) -- Personal care products and Cosmetics -- Food products -- Mineral oils -- Car care products - Toys - Automotive parts Complies with: - U.S. FDA 21 177 1520 (c) 3.2a - Europe Commission Regulation (EU) No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

HDPE 40055L HF is a bimodal High Density Polyethylene resin that combines outstanding environmental stress crack resistance with good stiffness and impact resistance. Its rheological characteristics make it ideal for the production of medium size containers. The viscosity of this resin has been specially tailored for machinery that requires slightly higher fluidity than the one provided by the Dow™ HDPE 40055L. Applications: - Jerrycans and medium size containers for: -- Aggressive liquids (e.g. detergents, surfactants, etc.) -- Chemicals -- Agrochemicals -- Food products - Containers requiring UN approval for the transport of dangerous goods - Industrial parts - Sheet extrusion Complies with Regulation: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12. Consult the regulation for complete details

HDPE 40055L is a bimodal High Density Polyethylene resin that combines outstanding environmental stress crack resistance (ESCR) with good stiffness and impact resistance. Its rheological characteristics make it ideal for the production of medium size containers Applications: - Jerrycans and medium size containers for: -- Aggressive liquids (e.g. detergents, surfactants, etc) -- Chemicals -- Agrochemicals -- Food products - Containers requiring UN approval for the transport of dangerous goods - Industrial parts - Sheet extrusion Complies with: - FDA regulation 177.1520(c)3.2a - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

HDPE 80017 is a High Density Polyethylene, copolímero of medium molecular weight, produced in the Slurry Process. This resin presents an excellent balance of properties and processability. Because of its molecular structure, this material combines a high impact resistance and Environmental Stress Cracking Resistance (ESCR), with high rigidity, suitable for the fabrication of corrugated pipes of single and double wall. Main Characteristics: - Corrugated pipes of single and double wall - Pipes for drain and waste - Complies with FDA 21 CFR 177.1520(c) 3.2a - Consult the regulation for complete details.

- For injection molding applications - For cap and closure, household products and toys Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

- For injection molding applications - For cap and closure, household products and toys Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

DOW™ HDPE 8262B is high density resin designed for use in reusable boxes and drawers as well as injection of rigid parts. Main Characteristics - High Density Polyethylene Resin (HDPE) - Excellent processability, UV stabilized Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a Consult the regulations for complete details.

- For injection molding applications - Fully thermal and UV stabilized for outdoor use - For beverage crates, pails and buckets Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

- For injection molding applications - Fully thermal and UV stabilized for outdoor use - For beverage crates, pails and buckets Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

Industrial Standards Compliance: - ASTM D 3350: cell classification PE445520A (See NOTES 1) - American Association of State Highway and Transportation Officials (AASHTO) M294/MP7 (See NOTES 2) DOW DGDA-2485 NT High Density Polyethylene resin is produced using UNIPOL™ II process technology and meets the needs of a wide variety of end uses including profile extrusion applications such as corrugated pipe. It combines excellent ESCR/NCLS with superior toughness and processability. NOTES: (1) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (2) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

DOW DGDA-5004 NT 7 High Density Polyethylene (HDPE) resin is a multi-purpose polymer designed for sheet extrusion and thermoforming applications, including single-serve disposables and other thin walled containers. Main Characteristics: - Maximum rigidity - High Impact Strength - Good Top Load Strength - Optimized Shear Rheology for Good Processability - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2 - Consult the regulations for complete details.

DGDA-9290 NT is a high performance Bimodal Polyethylene resin with an outstanding balance of processability and toughness, designed for communications and power cable jacketing applications. DGDA-9290 NT has superior Environmental Stress Crack and Chemical Resistance.

DOW DGDB-2480 NT High Density Polyethylene resin is produced using UNIPOL™ process technology. It is intended for use in pipe applications where long term hydrostatic strength and resistance to slow crack growth are desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE345464A - Black - PE345464C (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Natural Pipe - DGDB-2480 NT 3408 -- ASTM PE3608 pipe grade - 1600psi HDB @ 73°F - Black Pipe - DGDB-2480 BK 3408 (See NOTES B) -- ASTM PE3608 pipe grade - 1600psi HDB @ 73°F and 800psi HDB @ 140°F National Sanitation Foundation (NSF) Standard 14 and 61 - Natural Pipe - DGDB-2480 NT 3608 - Black Pipe - DGDB-2480 BK 3608 (See NOTES B) Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

DOW DGDB-5004 NT 7 High Density Polyethylene (HDPE) resin is a multi-purpose polymer designed for sheet extrusion and thermoforming applications, including single-serve disposables and other thin walled containers including food service such as cups, plates, bowls and refrigerated dairy containers. Main Characteristics: - Maximum rigidity - Excellent color consistency - High Melt Strength - High Impact Strength including low temperature toughness - Good Top Load Strength - Optimized Shear Rheology for Good Processability Complies with: - U.S. FDA 21 CFR 177.1520 (c) 2.2 - Canadian HPFB No Objection Consult the regulations for complete details.

- High Density Polyethylene (HDPE) - Complies with: -- U.S. FDA 21 CFR 177.1520 (c) 3.2a -- Canadian HPFB No Objection -- EU, No 10/2011 -- Consult the regulations for complete details. DOW DGDC-2100 NT 7 High Density Polyethylene Resin is a high-molecular weight, high-density film grade resin. This product was specifically designed to offer an optimal balance of physical properties and processability. DGDC-2100 NT7 HDPE resin is ideally suited for use in making grocery sacks, consumer and institutional liners, and merchandise bags.

Dow HDPE DMDA-8007 HEALTH+™ is a narrow molecular weight distribution high density homopolymer designed to offer excellent stiffness, low warpage, good toughness, and good moldability. The resin is suitable for injection-molded medical devices such as IV kit components and respiratory care as well as caps and closures for pharmaceutical packaging. Main Characteristics: - Excellent stiffness - Low warpage - Good toughness - High gloss parts Complies with: - U.S. FDA 21CFR 177.1520 (c) 2.2 - EU, No 10/2011 - Canadian HPFB, No Objection - USP XXIII Class VI - Drug Master File Listing Consult the regulations for complete details.

- Excellent stiffness/modulus - Excellent warp resistance - Molded parts have high gloss, low odor - For injection molded crates, cases, totes, and other parts needing high modulus - Complies with U.S. FDA 21 CFR 177.1520 (c)2.2 - Complies with Canadian HPFB No Objection - Complies with EU, No 10/2011 - Consult the regulations for complete details. DOW DMDA-8007 NT 7 High Density Polyethylene (HDPE) Resin is a narrow molecular weight distribution high density homopolymer designed to offer excellent stiffness, low warpage, good/acceptable toughness, and good moldability. This resin is ideally suited for injection molded crates, cases, trays, tote bins, and other objects requiring high rigidity. This resin is also suitable for cast film extrusion processing.

- For Extrusion Coating Applications - Complies with U.S. FDA 21 CFR 177.1520 (c) - Europe Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details

Dow HDPE DMDA-8904 HEALTH+™ is a narrow molecular weight distribution high density copolymer designed to offer excellent stiffness, environmental stress crack resistance, and good moldability. The resin is suitable for injection-molded medical devices such as IV kit components and respiratory care. Films can also be cast from this product yielding good barrier and stiffness. Main Characteristics: - Excellent stiffness - Excellent stress crack resistance - Good processability - High gloss parts Complies with: - U.S. FDA 21CFR 177.1520 (c) 3.2a - EU, No 10/2011 - Canadian HPFB No Objection - USP XXIII Class VI - Drug Master File Listing Consult the regulations for complete details.

- Injection molding - For injection molded pails, industrial parts and other shipping containers - Excellent impact strength, stress crack resistance and processability - Very narrow molecular weight distribution Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.2a - Canadian HPFB No Objection - EU, No 10/2011 Consult the regulations for complete details. DOW DMDA-8904 NT 7 High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in injection molding applications such as pails, industrial parts and other shipping containers. This resin has been designed to provide excellent processability for molders and to meet the rigorous performance characteristics of applications requiring stackability, environmental stress crack resistance and impact strength. This resin is also suitable for cast film extrusion processing.

Dow HDPE DMDA-8907 HEALTH+™ is produced via UNIPOL™ Process Technology from Dow and is intended for use in injection molded medical device applications. This resin has been designed to provide excellent processability to molders and to meet the requirements of devices requiring impact strength and environmental stress crack resistance. Main Characteristics: - Good environmental crack resistance - Excellent toughness - Gamma stable - Low extractables Complies with: - U.S. FDA 21CFR 177.1520 (c) 3.2a - EU, No 10/2011 - Canadian HPFB, No Objection - USP XXIII Class VI - Drug Master File Listing Consult the regulations for complete details.

DOW DMDA-8907 NT 7 High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in injection molding applications such as pails, industrial parts and other shipping containers. This resin has been designed to provide excellent processability for molders and to meet the rigorous performance characteristics of applications requiring stackability, environmental stress crack resistance and impact strength. - Injection molding - For injection molded pails, industrial parts and other shipping containers - Excellent impact strength, stress crack resistance and processability - Very narrow molecular weight distribution Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.2a - Canadian HPFB No Objection - EU, No 10/2011 - U.S. USP - U.S. FDA DMF Consult the regulations for complete details.

DOW™ DMDA-8910 NT 7 High Density Polyethylene (HDPE) Resin is produced by the UNIPOL™ Process Technology from Dow and is intended for use in injection molded rigid packaging applications including material handling and industrial container applications. The resin is designed to meet rigorous performance characteristics, including environmental stress crack resistance and impact strength, while maintaining excellent processing characteristics beneficial for molders. Main Characteristics: - Injection or Compression Molding - Designed for caps and closures - Excellent impact strength, stress crack resistance and processability - Very narrow molecular weight distribution - Excellent Organoleptic properties Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - Canadian HPFB No Objection Consult the regulations for complete details.

DOW HDPE DMDA-8920 HEALTH+™ Resin is a narrow molecular weight distribution high density copolymer designed to offer an excellent balance of toughness, environmental stress cracking resistance, and processability. The resin is suitable for injection-molded medical devices such as IV kit components and respiratory care. This product can also be used in pharmaceutical packaging including caps and closures. Main Characteristics: - Excellent toughness - Excellent stress crack resistance - Good processability - High gloss parts Complies with: - U.S. FDA 21CFR 177.1520(c)3.1a - USP XXIII Class VI - EU, No 10/2011 - Canadian HPFB - No Objection - Drug Master File Listing Consult the regulations for complete details.

- Injection molding - For injection molded housewares, toys, food containers and pails - Excellent balance of toughness, stress crack resistance and processability - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520 (c)3.2a - Complies with U.S. FDA - DMF - Complies with Canadian HPFB No Objection - Complies EU, No 10/2011 - Consult the regulations for complete details. DOW DMDA-8920 NT 7 High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in a broad range of injection molding applications such as housewares, toys, food containers and pails. This resin has been designed to provide an excellent balance of toughness, environmental stress crack resistance and processability.

Overview: - Injection molding - Narrow molecular weight distribution - Excellent balance of toughness, and stress crack resistance - Complies with U.S. FDA21 CFR 177.1520 ( c )3.2a - Canadian HPFB No Objection - Consult the regulations for complete details. DOW™ DMDA-8933 NT 7 High Density Polyethylene (HDPE) is produced via UNIPOL™ Process Technology from Dow and is intended for use in a broad range of injection molding applications such as injection molded containers and thin-walled pails. The product is specifically designed to provide excellent processing in all injection molding equipment.

Dow HDPE DMDA-8940 HEALTH+™ Resin is a narrow molecular weight distribution high density copolymer designed to offer an excellent balance of toughness, environmental stress crack resistance, and processability. The resin is suitable for injection-molded medical devices such as IV kit components and respiratory care. This product can also be used in pharmaceutical packaging including caps and closures. Main Characteristics: - Excellent toughness - Excellent stress crack resistance - Good processability - High gloss parts Complies with: - U.S. FDA 21CFR 177.1520 (c) 3.2a - EU, No 10/2011 - Canadian HPFB No Objection - USP XXIII Class VI - Drug Master File Listing Consult the regulations for complete details.