DOW™ LLDPE 1048P is a butene copolymer linear low density polyethylene resin. Main Characteristic: - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. Applications - Blown film - Cast film

LLDPE 1050B is a Linear Low Density Polyethylene Resin 1-Butene copolymer, produced in the Solution process. This resin is designed to be used in cast extrusion to produce films for stretch and health & hygiene applications. Complies with: - European Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520(c)3.2a Consult the regulation for complete details

Dow LLDPE 1613.11 is a Linear Low Density Polyethylene Resin, 1-hexene copolymer, produced in the Solution process. This resin is designed to be used in blown extrusion to produce films for industrial applications and consumer packaging. It contains slip and antiblock additives. Complies with: - U.S. FDA, 21 CFR 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 (See NOTES) Consult the regulations for complete details.

LLDPE 1613.11T is a Linear Low Density Polyethylene Resin, 1-Hexene, 1-Octene terpolymer, produced in the Solution process. This resin is designed to be used in cast extrusion to produce films for industrial applications and consumer packaging.

Dow LLDPE 1613 is a Linear Low Density Polyethylene Resin, 1-hexene copolymer, produced in the Solution process. This resin is designed to be used in blown extrusion to produce films for industrial applications and consumer packaging. Complies with: - U.S. FDA, 21 CFR 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 (See Notes) Consult the regulations for complete details.

LLDPE 1613.11T is a Linear Low Density Polyethylene Resin, 1-Hexene, 1-Octene terpolymer, produced in the Solution process. This resin is designed to be used in cast extrusion to produce films for industrial applications and consumer packaging. Complies with: - Europe Commission Regulation (EU) No 10/2011 (See NOTES) - U.S. FDA 21 CFR 177.1520(c )3.2a Consult the regulations for complete details.

Dow LLDPE 1630 is a Linear Low Density Polyethylene Resin, 1-hexene copolymer, produced in the Solution Process. This resin is designed to be used in cast extrusion to produce films for industrial applications and consumer packaging. Complies with: - U.S. FDA, 21 CFR 177.1520(c)3.2a - Europe EU Commission Regulation (EU) No 10/2011 (See NOTES) Consult the regulations for complete details.

LLDPE 1630T is a Linear Low Density Polyethylene Resin, 1-hexene, 1-Octene terpolymer, produced in the Solution process. This resin is designed to be used in cast extrusion to produce films for industrial applications and consumer packaging.

LLDPE 1646 is a polyethylene resin for blown film extrusion. Main Characteristics: - Industrial and consumer blown film applications Complies with: - EU, No 10/2011 - U.S. FDA FCN 741 Consult the regulations for complete details.

LLDPE 1648 is a linear low density polyethylene, hexene copolymer, designated for cast stretch film applications, such as industrial pallet wrap. - Linear low density polyethylene - For industrial pallet wrap stretch film applications Complies with : - US FDA 21 CFR 177.1520 ( c ) 3.2a - EU, No 10/2011 - Consult the regulations for complete details

DOW™ DFDA-7047 NT7 linear low density polyethylene is an ethylene-butene copolymer designed for blown film applications. Main Characteristics: - Butene linear low density polyethylene - Blown film extrusion - Pellet form Complies with: - EU, No 10/2011 - U.S. FDA, 21 CFR 177.1520(c)3.2a - Canadian HPFB No Objection (with Limitations) - JHOSPA (Japan Hygienic Olefin and Styrene Plastics Association) Consult the regulations for complete details.

DOW DFDA-7059 NT 7 Linear Low Density Polyethylene Resin is an ethylene-butene copolymer which is supplied in pelleted form. It is generally recommended for slot cast thin film applications requiring both clarity and toughness. It is excellent in coextruded, slot cast stretch wrap. This resin is also suitable for use in hose and tube applications. Main Characteristics: - High clarity - High tensile strength - High elongation - Good puncture resistance Complies with: - U.S. FDA 21 CFR 177.1520(c) 3.2a - EU, No 10/2011 - Canadian HPFB No Objection Consult the regulations for complete details.

DOW™ DFDC-7047 NT7 linear low density polyethylene is an ethylene-butene copolymer designed for blown film applications. Main Characteristics: - Butene linear low density polyethylene - Blown film extrusion - Pellet form - TNPP (Tris(nonylphenyl) phosphite) free formulation Complies with: - EU, No 10/2011 - U.S. FDA, 21 CFR 177.1520(c)3.2a Consult the regulations for complete details.

DOW™ DFDD-7080 NT7 linear low density polyethylene is an ethylene-butene copolymer designed for blown film applications. This resin is formulated with a TNPP (Tris-nonylphenyl Phosphite) free additive package. Main Characteristics: - Butene linear low density polyethylene - Blown film extrusion - Pellet form Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a (with Restrictions) Consult the regulations for complete details.

DOW™ DFDE-7087 NT7 linear low density polyethylene is an ethylene-butene copolymer designed for blown film applications. This resin is formulated with a TNPP (Tris-nonylphenyl Phosphite) free additive package. Main Characteristics: - Butene linear low density polyethylene - Blown film extrusion - Pellet form Complies with: - EU, No 10/2011 - U.S. FDA, 21 CFR 177.1520(c)3.2a (with Restrictions)

DOW™ DFDF-7047 NT7 linear low density polyethylene is an ethylene-butene copolymer designed for blown film applications. This resin is formulated with a TNPP (Tris-nonylphenyl Phosphite) free additive package. Main Characteristics: - Butene linear low density polyethylene - Blown film extrusion - Pellet form Complies with: - EU, No 10/2011 - U.S. FDA, 21 CFR 177.1520(c)3.2a Consult the regulations for complete details.

DOW DNDA-1055 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for high-speed injection molding of thin-walled parts such as lids. This resin has been designed to have an excellent balance of processability and impact strength. Main Characteristics: - Excellent processability - Good low temperature impact strength - Balanced density and melt index Complies with: - U.S. FDA 21 CFR 177/1520(c)3.1a - Canadian HPFB No Objection Consult the regulations for complete details.

- Injection molding - Lids - Excellent processability with good low temperature impact strength and rigidity - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Complies with FDA-DMF - Complies with EU, No 10/2011 - Complies with CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - Consult the regulations for complete details. DOW DNDA-1081 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for highspeed injection molding of thin-walled parts such as downgauged lids. This resin has been designed to have an excellent balance of processability, impact strength, and rigidity.

- Injection molding - Lids - Excellent processability with good low temperature impact strength and rigidity - Very narrow molecular weight distribution - Complies with EU, No 10/2011 - Complies with CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Consult the regulations for complete details. DOW DNDA-1082 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for highspeed injection molding of thin-walled parts such as downgauged lids. This resin has been designed to have an excellent balance of processability, impact strength, and rigidity.

DOW™ DNDA-1088 NT 7 Linear Low Density Polyethylene (LLDPE) is produced via UNIPOL™ Process Technology and is intended for high-speed injection molding of thin-walled parts such as downgauged lids. This resin has been designed to have an excellent balance of processability, impact strength, and rigidity. Overview: - Injection molding - Lids - Excellent processability with good impact strength and rigidity - Narrow molecular weight distribution Complies with: - U.S. FDA 21 CFR 177.1520(c )3.1a - Europe Commission Regulation (EU) No 10/2011 (See NOTES) Consult the regulations for complete details.

- Injection molding - Large industrial containers and trash cans - Excellent low temperature impact strength, rigidity, stress crack resistance and processability - Very narrow molecular weight distribution - Complies with -- U.S. FDA 21 CFR 177.1520 (c)3.1a -- CANDIAN HPFB NO OBJECTION ( WITH LIMITATIONS) -- EU, No 10/2011 -- U.S. FDA -DMF -- Consult the regulations for complete details. DOW DNDA-7144 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for use in injection molding applications such as large industrial containers and trash cans. This resin has been designed to have excellent impact strength, rigidity, environmental stress crack resistance and processability.

- High melt strength - Excellent low temperature toughness - Outstanding environmental stress crack resistance - Exceptional flex life - Industrial Standards Compliance: -- ASTM D3350: cell classification PE123110A - Complies with: -- U.S. FDA 21 CFR 177.1520 (c) 3.1a -- US FDA-DMF -- Canadian HPFB No Objection (with limitations) -- EU, No 10/2011 -- Consult the regulations for complete details. DOW DNDA-7340 NT 7 Linear Low Density Polyethylene (LLDPE) Resin offers outstanding flex life, toughness and environmental stress crack resistance (ESCR) and is well-suited for use in blow molding applications such as small, squeezable bottles, as well as, extruded flexible hoses and, tubing. Offering high melt strength, excellent toughness and outstanding ESCR, DOW DNDA- 7340 NT 7 LLDPE resin also is well-suited for use in large blow molded parts, such as drum liners. Additionally, It may also be used in certain sheet and tubing applications where these properties are also important.

- Injection molding - General purpose applications - Excellent low temperature impact strength, rigidity, stress crack resistance and processability - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Complies with EU, No 10/2011 - Complies with U.S. FDA-DMF - Complies with CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - Consult the regulations for complete details. DOW DNDA-8320 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using the UNIPOL™ PE Process Technology and is intended for use in general purpose injection molding applications. This resin has been designed to have excellent impact strength, rigidity, environmental stress crack resistance and processability.

DOW DNDA-8335 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for use in general purpose injection molding applications. This resin has been designed to have excellent impact strength, rigidity, environmental stress crack resistance and processability. - Injection molding - General purpose applications - Excellent low temperature impact strength, rigidity, stress crack resistance and processability - Very narrow molecular weight distribution Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a - EU Food Contact Consult the regulations for complete details.

- Injection molding - Lids - Excellent processability with good low temperature impact strength - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Complies with CANADIAN HPFB NO OBJECTION (With Limitiations) - Complies with EU, No 10/2011 - Consult the regulations for complete details. DOW DNDB-1077 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for highspeed injection molding of thin-walled parts such as downgauged lids. This resin has been designed to have an excellent balance of processability and impact strength.

DNDB-7147 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for use in injection molded applications such as food containers, housewares and lids. This resin has been designed to have an excellent balance of impact strength, rigidity, environmental stress crack resistance and processability. Main Characteristics : - Injection molding - Excellent low temperature impact strength, rigidity, stress crack resistance and processability - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520(c)3.1a. - Consult the regulations for complete details.

Industrial Standards Compliance: - ASTM D 3350: cell classification PE123110A - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a - Complies with EU, No 10/2011 - Consult the regulations for complete details. DOW DNDB-7441 NT 7 Linear Low Density Polyethylene Resin is produced using UNIPOL™ process technology. It is intended for use in hose and tube applications. It also has utility in gasketing, spiral wound hose, and corrugated hose applications. It exhibits good draw down, excellent resistance to melt fracture, low temperature toughness, uniform matte surface finish, and exceptional flex life. It has a modulus (stiffness) that is 50% higher than that of a conventional high pressure, low density polyethylene resin of equal density. It is especially well suited for profile extrusions where stress cracking resistance, flexural wear resistance, and ease of extrusion are important. It is also recommended as a modifier in blends with flexible copolymers such as ethylene ethyl acetate (EVA) and ethylene ethyl acrylate (EAA) to enhance their rigidity in extrusion applications.

DOW GRSN-2070 NT Liner Low Density Polyethylene Granular Solid is produced using UNIPOL™ process technology. It is granular product intended for use in the production of color concentrates and master batches.

Overview: - Granular form - Carrier resin for masterbatch systems Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.2a - European Commission Regulation (EU) No 10/2011 Consult the regulations for complete details. DOW GRSN-9802 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is supplied in granular form. This resin is specifically designed as a carrier resin for color concentrates and other masterbatch systems. The fine particle size reduces the need for grinding, and the high surface area of granular resin allows for more uniform dispersion of concentrate in the final product. GRSN- 9802 NT 7 is compatible with polyethylene and polypropylene resins and can be used in a wide variety of fabrication processes.

- Granular form - Carrier resin for masterbatch systems - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Complies with EU, No 10/2011 - Consult the regulations for complete details. DOW GRSN-9820 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is supplied in granular form. This resin is specifically designed as a carrier resin for color concentrates and other masterbatch systems. The fine particle size reduces the need for grinding, and the high surface area of granular resin allows for more uniform dispersion of concentrate in the final product. GRSN-9820 NT 7 is compatible with polyethylene and polypropylene resins and can be used in a wide variety of fabrication processes.

- Octene copolymer - Linear Low Density Polyethylene - For blown and cast film applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a. Consult the regulation for complete details.

- Octene Copolymer - Linear Low Density Polyethylene - For high speed blown film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a.

- Octene Copolymer - Linear Low Density Polyethylene - For high speed blown film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a.