Lupolen 1800 H is a low density polyethylene resin used in a wide range of processing methods such as injection molding, blow molding and film extrusion. It exhibits very good softness and toughness and good dimensional stability. Lupolen1800 H is delivered in pellet form and is not additivated. Typical customer applications include caps & closures, lids, foams and champagne corks. Lupolen 1800 H is not intended for use in medical and pharmaceutical applications.

Lupolen 1800P is a low density polyethylene resin used in injection molding and other processing methods. It exhibits high flowability, and good softness, toughness and dimensional stability. Lupolen 1800 P is delivered in pellet form and is not additivated. Lupolen 1800P is used in applications such as compounding, toys, caps & closures, engineering parts, and sports and leisure equipment. Lupolen 1800P is not intended for use in medical and pharmaceutical applications.

Lupolen 1800S is a low density polyethylene resin used in injection molding and other processing methods like compounding. It exhibits high flowability, good softness, toughness and dimensional stability. Lupolen 1800S is delivered in pellet form and is not additivated. Lupolen 1800S is used in applications such as toys, caps & closures, engineering parts, and sports and leisure equipment. Lupolen 1800S is not intended for use in medical and pharmaceutical applications.

Lupolen 1800U is a low density polyethylene resin used in various processing methods such as injection molding and compounding. It exhibits very high flowability and a very good balance of softness and toughness, dimensional stability and good processing. Lupolen 1800U is delivered in pellet form and is not additivated. It is used in a wide range of injection molding applications such as thin-wall packaging (TWIM) and housewares. Lupolen 1800U is also used in the area of compounding for color and additive batches and as a viscosity modifier. Customers have reported that the high melt flow rate (MFR) of Lupolen 1800U enables very good dispersion and homogenization at high loads with pigments and additives. Lupolen 1800U is not intended for use in medical and pharmaceutical applications.

Lupolen 1840 D is a non-additivated, low density polyethylene. It is characterized by a high melt strength leading to a good bubble stability during blown film extrusion. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 2420 D is a non-additivated, low density polyethylene. It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 2420 F is a non-additivated, low density polyethylene. It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 2420 H is a non-additivated, low density polyethylene. It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 2420 K is a non-additivated, low density Polyethylene. It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation.

Lupolen 2420 F PLUS is a non-additivated, low density polyethylene. This grade is characterized by a very low gel level. Typical customer applications are surface protection films or other higher value film applications where a very low gel content is required . It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 2421 F is an additivated, low density polyethylene. It contains an antioxidant and is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 2421 H is an additivated, low density polyethylene. It contains an antioxidant and is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 2421 K is an additivated, low density polyethylene. It contains an antioxidant and is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 2426 F is an additivated, low density polyethylene. It contains slip and anti-blocking agent. It is characterized by a good melt strength leading to a good bubble stability during blown film extrusion.It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 2426 H is an additivated, low density polyethylene. It contains slip and anti-blocking agent. It is characterized by a good balance between processability and mechanical properties. Films made from Lupolen 2426 H exhibit good optical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 2426 K is an additivated, low density polyethylene. It contains slip and anti-blocking agent. It is characterized by a good processability. Films made from Lupolen 2426 K exhibit good optical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 2427 F is an additivated, low density polyethylene. It contains an antioxidant, slip and anti-blocking agent. It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 2427 H is an additivated, low density polyethylene. It contains an antioxidant, slip and anti-blocking agent. It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 2427 K is an additivated, low density polyethylene. It contains an antioxidant, slip and anti-blocking agent. It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3010 D is a non-additivated, low density polyethylene. It is characterized by a high melt strength leading to a good bubble stability during blown film extrusion. LyondellBasell customers report that films made from Lupolen 3010 D exhibit a good shrinkage performance. Lupolen 3010 D provides the option to produce films with good optical and mechanical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3020 H PLUS is a non-additivated, low density polyethylene with high rigidity, good opticals and good chemical resistance. This grade is characterized by a very low gel level. Typical customer applications are lamination films or other higher value film applications where a very low gel content is required . It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3020 F is a non-additivated, low density polyethylene. It is characterized by a good melt strength leading to a good bubble stability during blown film extrusion. LyondellBasell customers report that films made from Lupolen 3020 F exhibit a good shrinkage performance. Lupolen 3020F provides the option to produce films with good optical and mechanical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3020 H is a non-additivated, low density polyethylene. It is characterized by a good balance between processability and mechanical properties. LyondellBasell customers report that films made from Lupolen 3020 H exhibit a glossy surface finish. Lupolen 3020 H provides the option to produce films with very good optical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3020 K is a non-additivated, low density polyethylene. It is characterized by a good processability. LyondellBasell customers report that films made from Lupolen 3020 K exhibit a glossy surface finish. Lupolen 3020 K provides the option to produce films with very good optical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3026 F is an additivated, low density polyethylene. It contains slip agent. It is characterized by a good melt strength leading to a good bubble stability during blown film extrusion. LyondellBasell customers report that films made from Lupolen 3026 F exhibit a good shrinkage performance. Lupolen 3026 F provides the option to produce films with good optical and mechanical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3026 H is an additivated, low density polyethylene. It contains slip agent. It is characterized by a good balance between processability and mechanical properties. LyondellBasell customers report that films made from Lupolen 3026 H exhibit a glossy surface finish. Lupolen 3026 H provides the option to produce films with very good optical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3026 K is an additivated, low density polyethylene. It contains slip and anti-blocking agent.It is characterized by a good processability. LyondellBasell customers report that films made from Lupolen 3026 K exhibit a glossy surface finish. Lupolen 3026 K provides the option to produce films with very good optical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3220 F is a non-additivated, low density polyethylene. It is characterized by a good melt strength leading to a good bubble stability during blown film extrusion. LyondellBasell customers report that films made from Lupolen 3220 F exhibit a good shrinkage performance. Lupolen 3220 F provides the option to produce films with good optical and mechanical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3420 J is a non-additivated, low density polyethylene. It is characterized by a good processability and high stiffness. LyondellBasell customers report that Lupolen 3420 J is used in label film and that films made from Lupolen 3420 J exhibit a glossy surface finish. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3426 J is an additivated, low density polyethylene. It contains slip and anti-blocking agent. It is characterized by a good processability and high stiffness. LyondellBasell customers report that Lupolen 3426 J is used in hygiene film and that films made from Lupolen 3426 J exhibit a glossy surface finish. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3621 M RM is a new generation hexene linear medium-density polyethylene for rotational molding. Typical customer applications include agricultural and chemical storage containers, technical parts and automotive parts. This product exhibits excellent ESCR and high impact strength at low temperatures. Lupolen 3621 M RM is a fully UV-stabilized and pelletized polymer. Tests have shown that this material is resisting against the harmful effect of biodiesel fuel.** It is not intended for use in medical and pharmaceutical applications. ** Resistance is based on our latest patented technology

Lupolen 3721 C is a medium density polyethylene with hexene as comonomer. It exhibits a good processability and is used in stiff films and as blending component for LDPE. It contains antioxidants and is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 4021 K RM is a new generation hexene linear medium-density polyethylene for rotomolding. Typical customer applications include large tanks including agricultural and chemical storage containers and underground and infrastructure applications. Lupolen 4021 K RM is a fully UV-stabilized and pelletized polymer. Tests have shown that this material is resisting against the harmful effect of biodiesel fuel.** It is not intended for use in medical and pharmaceutical applications. ** Resistance is based on our latest patented technology

Lupolen 4261A IMBD is a high molecular weight high density polyethylene. Typical customer applications include components for automotive fuel tank applications if outstanding biodiesel durability is requested. It is supplied in pelletized form and is stabilized with antioxidants for the injection molding process. The product features an outstanding Environmental Stress Cracking Resistance (ESCR), good chemical resistance in combination with an excellent low temperature impact resistance. Typical processes include injection moulding. Physical properties and process ability are very close to Lupolen 4261 A IM. Lupolen 4261A IMBD is not intended for use in medical and pharmaceutical applications. The product can not be used for food contact applications.

Lupolen 4261 A IM is a high molecular weight high density polyethylene (HDPE). Typical customer applications include components for automotive fuel tank applications. It is supplied in pelletized form and is stabilized with antioxidants for the injection molding process. The product features an outstanding Enviromental Stress Cracking Resistance (ESCR), good chemical resistance in combination with an excellent low temperature impact resistance. Typical process includes injection molding. Lupolen 4261 A IM is not intended for use in medical and pharmaceutical applications.

Lupolen 4261 A Q 416 is a high density polyethylene (HDPE) with high melt viscosity for extrusion of radiation crosslinked pipes (PE-Xc). The product has a high heat- and extremely high extraction stability. It is not intended for medical and pharmaceutical applications.

Lupolen 4261 A SW 63200 is a black masterbatch based on high molecular weight high density polyethylene (HDPE). Typical customer applications include its use for automotive fuel tank applications. It is supplied in pellets and is stabilized with antioxidants and a UV-stabiliser. Typical production processes include blow molding, injection molding and thermoforming. Lupolen 4261 A SW 63200 is not intended for use in medical and pharmaceutical applications. The product can not be used for food contact applications.

Lupolen 4261AG BD is a high molecular weight high density polyethylene. Typical customer applications include automotive fuel tank applications if outstanding biodiesel durability is requested. It is supplied in pellets and is stabilized with antioxidants for the extrusion process. The product features an outstanding Environmental Stress Cracking Resistance (ESCR), good chemical resistance in combination with an excellent low temperature impact resistance. Typical processes include blow molding and thermoforming. Physical properties and process ability are very close to Lupolen 4261AG. Lupolen 4261AG BD is not intended for use in medical and pharmaceutical applications. The product can not be used for food contact applications.

Lupolen 4261 AG UV is a high density polyethylene with outstanding ESCR, high impact resistance and good chemical resistance, delivered in pellet form. Main applications* are jerry cans, heating oil tanks and IBC. *Appropriateness of resin for use in specific applications, under outdoor or indoor storage conditions or for specific container contents should be carried out by the appropriate parties (converter, end user) on the molded item with reference to appropriate local, national and international guidelines.

Lupolen 4261 AG is a high molecular weight high density polyethylene (HDPE). Typical customer applications include automotive fuel tank applications. It is supplied in pellets and is stabilized with antioxidants for the extrusion process. The product features an outstanding Enviromental Stress Cracking Resistance (ESCR), good chemical resistance in combination with an excellent low temperature impact resistance. Typical processes include blow moulding and thermoforming. Lupolen 4261 AG is not intended for use in medical and pharmaceutical applications. The product can not be used for food contact applications.