PA66 with 50 % ash content - heat stabilized -11mm Material code according to ISO 1043-1: PA66 Heat stabilized Nylon 66 reinforced by 50 weight percent long glass fibers. The pellets are cylindrical and normally as well as the embedded fibers 11mm long. Parts molded of CELSTRAN have outstanding mechanical properties such as high strength and stiffness combined with high heat deflection. The notched impact strength is increased at elevated and low temperatures due to the fiber skeleton built in the parts. The long fiber reinforcement reduces creep significantly. The very isotropic shrinkage in the molded parts minimizes the warpage. Complex parts can be manufactured with high reproducibility by injection molding. Can be used for substituting die cast metal with the advantage of Weight reduction, no corrosion problems, no post treatment.

PA66 with 50 % ash content - heat stabilized - 7mm Material code according to ISO 1043-1: PA66 Heat stabilized Nylon 66 reinforced by 50 weight percent long glass fibers. The pellets are cylindrical and normally as well as the embedded fibers 7 mm long. Parts molded of CELSTRAN have outstanding mechanical properties such as high strength and stiffness combined with high heat deflection. The notched impact strength is increased at elevated and low temperatures due to the fiber skeleton built in the parts. The long fiber reinforcement reduces creep significantly. The very isotropic shrinkage in the molded parts minimizes the warpage. Complex parts can be manufactured with high reproducibility by injection molding. Can be used for substituting die cast metal with the advantage of Weight reduction, no corrosion problems, no post treatment.

50% Long strand glass fiber reinforced heat stabilized Nylon 6/6 50 % Long glass fiber reinforced, heat stabilized, Nylon 6/6

50% long fiber glass reinforced, enhanced flow, Nylon 6/6 50% long fiber glass reinforced, enhanced flow, Nylon 6/6

PA66 with 50% ash content - high gloss, high impact modified Material code according to ISO 1043-1: PA66 Heat stabilized Nylon 66 reinforced by 50 weight percent long glass fibers. The pellets are cylindrical and normally as well as the embedded fibers 11 mm long. Parts molded of CELSTRAN have outstanding mechanical properties such as high strength and stiffness combined with high heat deflection. The notched impact strength is increased at elevated and low temperatures due to the fiber skeleton built in the parts. The long fiber reinforcement reduces creep significantly. The very isotropic shrinkage in the molded parts minimizes the warpage. Complex parts can be manufactured with high reproducibility by injection molding. Can be used for substituting die cast metal with the advantage of Weight reduction, no corrosion problems, no post treatment.

PA66/6 copolymer with 60% ash content - natural Material code according to ISO 1043-1: PA66 Nylon 66/6 copolymer reinforced by 60 weight percent long glass fibers. The pellets are cylindrical and normally as well as the embedded fibers 10 mm long. Parts molded of CELSTRAN have outstanding mechanical properties such as high strength and stiffness combined with high heat deflection. The notched impact strength is increased at elevated and low temperatures due to the fiber skeleton built in the parts. The long fiber reinforcement reduces creep significantly. The very isotropic shrinkage in the molded parts minimizes the warpage. Complex parts can be manufactured with high reproducibility by injection molding. Can be used for substituting die cast metal with the advantage of Weight reduction, no corrosion problems, no post treatment.

Celstran PA66 Material code according to ISO 1043-1: PA66 Heat stabilized Nylon 66 reinforced by 60 weight percent long glass fibers. The pellets are cylindrical and normally as well as the embedded fibers 10 mm long. Parts molded of CELSTRAN have outstanding mechanical properties such as high strength and stiffness combined with high heat deflection. The notched impact strength is increased at elevated and low temperatures due to the fiber skeleton built in the parts. The long fiber reinforcement reduces creep significantly. The very isotropic shrinkage in the molded parts minimizes the warpage. Complex parts can be manufactured with high reproducibility by injection molding. Can be used for substituting die cast metal with the advantage of Weight reduction, no corrosion problems, no post treatment.

Celstran PA66-GF60-02 AD3004 is a 60% long glass fiber, heat stabilized Polyamide. This material imparts excellent impact and modulus properties that exceed those of short fiber nylon. Celstran PA66 works extremely well in high temperature, thermally demanding applications.

60% long strand glass fiber reinforced heat stabilized Nylon 6/6 60% long glass fiber reinforced, heat stabilized, Nylon 6/6

50% long stainless steel fiber filled PA66 The Celstran PA66-SF50-02 AF3001 Natural is a 50% by weight stainless steel fiber concentrate. This product is intended to be used at levels from 6% to 40% in combination with neat or filled PA66 to achieve the desired level of electrostatic dissipation (ESD) and electromagnetic interference (EMI)/ radio frequency interference (RFI) shielding. The resulting formulation will yield stainless steel levels of 3% to 20%. 'Long Stainless Fiber' materials have a significant advantage over short stainless fiber filled plastics. Conductivity properties increase by nearly 100 times when comparing to similar loadings.

Celstran® PA6-CF40-01 is a 40% long Carbon fiber Polyamide. This material imparts excellent impact and modulus properties that exceed that of short fiber PA6.

30% long strand glass fiber reinforced nylon 6 30% long strand glass fiber reinforced nylon 6 Black

40% long strand glass fiber reinforced nylon 6 40% long strand glass fiber reinforced nylon 6 Natural

50% long strand fiber glass reinforced nylon 6 50% long strand fiber glass reinforced nylon 6 Natural

50% glass reinforced, UV and Heat stabilized Nylon 6 Nylon 6 with 50% long glass reinforcement, heat stabilized

60% long strand glass fiber reinforced nylon 6 60% long strand glass fiber reinforced nylon 6 Natural

60% long strand glass fiber reinforced nylon 6 Natural 60% long strand glass fiber reinforced nylon 6 Natural

CoolPoly D3612 is a thermally conductive, electrically non-conductive PA6 based flame retardant grade CoolPoly D series of thermally conductive plastics transfers heat, a characteristic previously unavailable in injection molding grade polymers. CoolPoly is lightweight, net-shape moldable and allows design freedom in applications previously restricted to metals and ceramics. The D series is electrically insulative and provides inherent electrical isolation characteristics.

CoolPoly E3609 is a thermally and electrically conductive PA6 based grade specified for auto applications. CoolPoly E series of thermally conductive plastics transfers heat, a characteristic previously unavailable in injection molding grade polymers. CoolPoly is lightweight, netshape moldable and allows design freedom in applications previously restricted to metals. The E series is electrically conductive and provides inherent EMI/RFI shielding characteristics.

CoolPoly E series of thermally conductive plastics transfers heat, a characteristic previously unavailable in injection molding grade polymers. CoolPoly is lightweight, netshape moldable and allows design freedom in applications previously restricted to metals. This grade is UV stable for exterior automotive applications as well as interior. It has good impact characteristics and high thermal conductivity.

Polyamide 66 compound, 30% glass fibre reinforced. General purpose grade suitable for any technical application.

33% Glass Reinforced, Utility Grade, PA66

Polyamide 66 compound, unfilled. Based on recycled polymers. Injection molding grade, easy flowing, suitable for many technical application.Â

Unfilled Polyamide 66 compound, impact modified. General purpose grade with improved flexibility.

Polyamide 66 compound, 15% mineral filled, impact modified and heat stabilized.

Polyamide 6.6 compound for injection moulding, 15% glass fibres reinforced. Based on recycled polymers. Suitable for various technical applications, this grade shows a good combination of mechanical and thermal performances.

Polyamide 6.6 compound for injection moulding, 30% glass fibres reinforced, heat stabilized. Based on recycled polymers. Designed for Automotive Industry, suitable for many other technological applications.Good combination of mechanical and thermal performances, improved flowability.

Polyamide 6.6 compound for injection moulding, 30% glass fibres reinforced, heat stabilized. Based on recycled polymers. Designed for Automotive Industry, suitable for many other technological applications.Good combination of mechanical and thermal performances.

Polyamid 66 compound, unfilled, elastomer modified, heat stabilized. Based on recycled polymers. General purpose grade, designed for Automotive industry, medium tougheness. Typically used for fitting elements.

Polyamid 66 compound, unfilled, elastomer modified, heat stabilized. Based on recycled polymers. General purpose grade, designed for Automotive industry, medium tougheness. Typically used for fitting elements.

Polyamid 66 compound, unfilled, elastomer modified, heat stabilized. Based on recycled polymers. General purpose grade, designed for Automotive industry, maximum tougheness.Â

Unfilled, Heat Stabilized, Utility Grade, PA66

13% Glass Reinforced, Heat Stabilized, Utility Grade, PA66

Polyamide 66 compound, 30% glass fiber reinforced, heat stabilized. General purpose grade, suitable for many technical applications.

30% Glass Reinforced, Heat Stabilized, Utility Grade, PA66

33% Glass Reinforced, Heat Stabilized, Utility Grade, PA66