An halogen-free flame retardant injection molding grade with outstanding free-flow properties, with good electrical properties and low smoke density; resistant to glow wire test GWFI to 960°C.

Halogen- and phosphorus-free injection molding grade with very high rigidity, low smoke density and outstanding electrical properties.

Mineral reinforced, halogen- and phosphorus free flame retardant injection moulding grade.

Ultramid B3W BK102 is an unreinforced, heat stabilized, pigmented black, low viscosity, general purpose injection molding PA6 exhibiting excellent fluidity for filling thin sections. It possesses the combination of strength, stiffness and toughness properties as well as excellent chemical, thermal and abrasion resistance. The heat stabilizer system extends its retention of properties at elevated temperatures. Applications Ultramid B3W BK102 is generally recommended for applications such as drapery hardware, gears, fittings, furniture casters, bearings, handles, clips and fasteners.

This resin is a heat stabilized, 50% glass fiber reinforced PA6 injection molding compound offering excellent strength, stiffness, high temperature performance and dimensional stability. It is available in natural, black weather resistant and pigmented versions. Applications Ultramid B3WG10 BK00564 is generally recommended for applications such as power tool housings, cattle ear taggers, luggage frames, fans and pressure regulator housings.

Ultramid B3WG13 BK00102 is a 63% glass reinforced, injection molding, high modulus nylon designed to have high strength and stiffness for metal replacement applications. It also has excellent moldability and outstanding surface appearance. Potential applications are mirror brackets, fuel lids, gas-assisted steering wheel inserts, ski bindings and bike rack clamps.

Ultramid B3WG13 HPX BK00102 is a 63% glass reinforced, injection molding, high modulus nylon designed to have high strength and stiffness for metal replacement applications. It also has excellent moldability and outstanding surface appearance.

Ultramid B3WG3 is a 15% glass fiber reinforced, heat stabilized injection molding PA6 grade.

Ultramid B3WG5 BK00564 is a 25% glass fiber reinforced, pigmented black injection molding PA6 grade with heataging resistance. Applications Typical applications include fan wheels.

Ultramid B3WG5 is a 25% glass fiber reinforced injection molding PA6 grade with heat aging resistance. Applications Typical applications include fan wheels.

Ultramid B3WG6 BK00564 BGVW is a 30% glass fiber reinforced, pigmented black, heat stabilized injection molding PA6 grade. Applications Typical applications include automotive manifolds and pedals.

Ultramid B3WG6 BK00564 is a 30% glass fiber reinforced, pigmented black, heat stabilized injection molding PA6 grade. Applications Typical applications include automotive manifolds and pedals.

Ultramid B3WG6 GIT BK807 is a 30% glass fiber reinforced, pigmented black, heat stabilized injection molding PA6 grade offering excellent flow characteristics and surface appearance and is paintable. Meets interior UV requirements. Applications Typical applications include power tools and interior door handles.

Ultramid B3WG6 GIT is a 30% glass fiber reinforced, heat stabilized injection molding PA6 grade offering excellent flow characteristics and surface appearance.

Glass fibre reinforced and heat ageing resistant injection moulding grade, with enhanced flowability used e.g. for automobile manifolds

Ultramid B3WG6 GPX BK23238 is a 30% glass fiber reinforced, heat stabilized injection molding PA6 grade for primary use in welded air intake manifolds. This grade has been engineered to provide improved burst pressure strengths with excellent long-term burst strength retention. Applications Typical applications include automotive manifolds and other powertrain components.

Ultramid B3WG6 is a 30% glass fiber reinforced, heat stabilized injection molding PA6 grade. Applications Typical applications include automotive manifolds and pedals.

Ultramid B3WG7 BK00564 is a 35% glass fiber reinforced, pigmented black, injection molding PA6 grade for highly rigid, dimensionally stable components which are resistant to high temperature aging and have improved retention of properties in a hot water environment. Applications Typical applications include automotive clutch and accelerator pedals.

Ultramid B3WG7 is a 35% glass fiber reinforced injection molding PA6 grade for highly rigid, dimensionally stable components which are resistant to high temperature aging and have improved retention of properties in a hot water environment. Applications Typical applications include automotive clutch and accelerator pedals.

Ultramid B3WG8 BK 00564 is a 40% glass reinforced, pigmented black, heat stabilized injection molding PA6 grade. Applications Typical applications include pedals/pedal module.

Glass-fibre and mineral reinforced injection moulding grade with outstanding flowability for industrial articles having medium to high rigidity, used e.g. for automobile engine covers, housings, etc.

Ultramid B3WGM24 HPX BK23210 is a very high productivity, 30% glass/mineral reinforced heat stabilized injection molding PA6 grade for components that require medium rigidity, excellent dimensional stability, low warpage out of the tool and excellent appearance. Applications Typical applications include automobile engine covers, housings and automotive door handles.

Glass-fibre and mineral reinforced heat stabilised injection moulding grade for industrial parts having medium to highrigidity and high dimensional stability, used e.g. for automobile engine covers, housings and automotive door handles.

Ultramid B3WM8 BK00102 is a heat stabilized, pigmented black, 40% mineral reinforced PA6 injection molding resin. It possesses high stiffness, dimensional stability and heat resistance combined with excellent processability including low warp and resistance to sink-mark formation. It maintains its inherent chemical resistance to greases, oils and hydrocarbons. Applications Ultramid B3WM8 BK00102 is generally recommended for applications such as marine hardware, brackets, fittings, bobbins, office furniture, appliance components, and power tool housings.

Ultramid B3ZG3 BK30564 is an impact-modified, pigmented black, 15% glass fiber reinforced injection molding PA6 grade. Applications Typical applications include automobile cable conduits.

Ultramid B3ZG3 is an impact-modified, 15% glass fiber reinforced injection molding PA6 grade. Applications Typical applications include automobile cable conduits.

Ultramid B3ZG6 BK30564 is an impact-modified, pigmented black, 30% glass fiber reinforced injection molding PA6 grade for industrial items having very high impact strength and rigidity. Applications Typical applications include automotive airbag housings and half-shells for suitcases.

Ultramid B3ZG6 is an impact-modified, 30% glass fiber reinforced injection molding PA6 grade for industrial items having very high impact strength and rigidity. Applications Typical applications include automotive airbag housings and half-shells for suitcases.

Ultramid B3ZG7 BK20560 is a 35% glass reinforced, black, heat stabilized, impact modified PA6 injection molding grade.

Ultramid B3ZG7 OSI BK23273 is a 35% glass reinforced, pigmented black, heat stabilized, impact modified PA6 injection molding grade. It was developed to meet demanding mechanical and chemical requirements for the automotive oil pan application. Applications Typical application is automotive oil pan.

Ultramid B3ZG7 SC is an uncolored, 35% glass reinforced, heat stabilized, impact modified PA6 injection molding grade.

Ultramid® C 216 V35 Black Z is a polyamide PA6, reinforced with 35 % of glass fibre, for injection moulding. This grade has good mechanical properties and offering an excellent combination between thermal and mechanical properties.

Ultramid® C 216 V40 Black Z is a polyamide 6, reinforced with 40% of glass fibre, for injection moulding. This grade has good mechanical properties and offering an excellent combination between thermal and mechanical properties.

TECHNYL® C 218 V18 Black is a polyamide 6, heat stabilized, reinforced with 18% of glass fiber, for injection moulding. The product offers an excellent combination between thermal and mechanical properties.

Ultramid® C 218 V30 Black 21N is a polyamide 6, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. The product offers an excellent combination between thermal and mechanical properties.

Ultramid® C 218 V33 Black is a polyamide 6, reinforced with 33% of glass fiber, heat stabilized, for injection moulding. The product offers an excellent combination between thermal and mechanical properties.

Ultramid® C 548B Black is an unreinforced polyamide 6, high viscosity, for extrusion blow-moulding. This grade offers a good processing behaviour, high impact resistance even at low temperature and high barrier properties especially to fluids such as fuels and oils, as well as a high toughness.

Ultramid C3U BK23079 is an injection molding, general purpose PA6/66, pigmented black grade with improved flame retardance. The product is UL recognized as 94V0 at 0.4 mm minimum thickness. Applications It is used for impact resistant electrical insulating parts such as contact bases and plug connector strips.

Ultramid C3U is an injection molding, general purpose PA6/66 grade with improved flame retardance. The product is UL recognized as 94V0 at 0.4 mm minimum thickness. Applications It is used for impact resistant electrical insulating parts such as contact bases and plug connector strips.

Ultramid D3WG12 HMG BK00102 is a 60% glass reinforced, injection molding polyamide offering high strength and stiffness. Due to inherently lower moisture absorption, Ultramid D3WG12 HMG BK00102 shows improved retention of mechanical properties after moisture conditioning. In addition, molded parts possess an exceptional surface finish. Applications Ultramid D3WG12 HMG BK00102 was designed for applications requiring very high rigidity and should be considered for components that are constructed with metal.