AKROMID® B28 LGF 40 1 L black (6155) is a 40% long glass fibre reinforced easy flowing polyamide 6 with extraordinary high stiffness and strength even at high temperature and very high impact and notched impact strength at elevated and low temperature as well as a reduced density compared to standard PA6 LGF 40. B28 LGF 40 1 L black (6155) distinguish due to isotrop mechanical properties, low shrinkage, higher heat deflection temperature and very good fatigue performance. The material has very good surface properties. Technical components in the automobile and mechanical engineering industries.

AKROMID® B28 LGF 50 1 L black (5928) is a 50% long glass fibre reinforced easy flowing polyamide 6 with extraordinary high stiffness and strength even at high temperature and very high impact and notched impact strength at elevated and low temperature as well as a reduced density compared to standard PA6 LGF 50. B28 LGF 50 1 L black (5928) distinguish due to isotrop mechanical properties, low shrinkage, higher heat deflection temperature and very good fatigue performance. Technical components in the automotive and electronic industry, where a weight and cost reduction is required.

AKROMID® B3 1 L black (4525) is a nonreinforced and heat stabilised polyamide-blend with a reduced density compared to standard PA6 Technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 1 L natural (4685) is an unreinforced and heat stabilised polyamide-blend with a reduced density compared to standard PA6 Technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 9 L natural (7008) is an unreinforced polyamide blend with reduced density vs. standards PA6, low emission behaviour and excellent surface quality. Technical components in the automotive and electronic industry, where a weight and cost reduction is required. Suitable for interior applications.

AKROMID® B3 GF 10 1 L natural (5011) is a 10% glass fibre reinforced and heat stabilised polyamide-blend with a reduced density compared to standard PA6 GF 10 Technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GF 15 1 L black (4670) is a 15% glass fibre reinforced and heat stabilised polyamide-blend with a reduced density compared to standard PA6 GF 15 Technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GF 15 1 L natural (4690) is a 15% glass fibre reinforced and heat stabilised polyamide-blend with a reduced density compared to standard PA6 GF 15 Technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GF 15 8 L natural (5689) is a 15% glass fibre reinforced polyamide-blend with high rigidity and strength and with a reduced density compared to standard PA6 GF 15 and light inherent color, modified for the respective application. Components in food industry

AKROMID® B3 GF 15 9 L natural (7511) is a 15% glass fibre reinforced polyamide-blend with a reduced density compared to standard PA6 GF 15 and excellent surface quality. Technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GF 20 9 L natural (7596) is a 20% glass fibre reinforced, process optimised polyamide-blend with a reduced density compared to standard PA6 GF 20, light inherent color and improved surface quality Technical components in the automotive and electronic industry, where a weight reduction is required

AKROMID® B3 GF 25 1 L black (4637) is a 25% glass fibre reinforced and heat stabilised polyamide-blend with a reduced density compared to standard PA6 GF 25 Mainly technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GF 25 1 L natural (4781) is a 25% glass fibre reinforced and heat stabilised polyamide-blend with a reduced density compared to standard PA6 GF 25 and light inherent colour Technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GF 25 9 L natural (7597) is a 25% glass fibre reinforced, process optimised polyamide-blend with a reduced density compared to standard PA6 GF 25, light inherent color and excellent surface quality. Technical components in the automotive and electronic industry, where a weight is required

AKROMID® B3 GF 30 1 L black (4365) is a 30% glass fibre reinforced and heat stabilised polyamide-blend with a reduced density compared to standard PA6 GF 30 Mainly technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GF 30 1 L black (4491) is a 30% glass fibre reinforced and heat stabilised polyamide-blend with a reduced density compared to standard PA6 GF 30 Technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GF 30 1 L black (5661) is a 30% glass fibre reinforced and heat stabilised polyamide-blend with a reduced density compared to standard PA6 GF 30 Technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GF 30 1 L natural (4684) is a 30% glass fibre reinforced and heat stabilised polyamide-blend with a reduced density compared to standard PA6 GF 30 Technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GF 30 1 XL black (4366) is a 30% glass fibre reinforced and heat stabilised polyamide-blend with a greatly reduced density compared to standard PA6 GF 30 Technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GF 30 4 L black (7481) is a 30% glass fibre reinforced and hydolysis stabilised polyamide-blend with a reduced density compared to standard PA6 GF 30 Mainly technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GF 30 7 L black (4912) is a 30% glass fibre reinforced and adhesion modified polyamide-blend with a reduced density compared to standard PA6 GF 30 Two component process demanding high adhesion to thermoplastic elastomers.

AKROMID® B3 GF 30 9 L black (7227) is a 30% glass fibre reinforced polyamide-blend with an excellent surface quality and reduced density compared to standard PA6 GF 30. Mainly technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GF 40 1 L black (4581) is a 40% glass fibre reinforced and heat stabilised polyamide-blend with a reduced density compared to standard PA6 GF 40 Technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GF 40 4 L black (7636) is a 40% glass fibre reinforced, hydrolysis/chemical stabilised polyamide-blend with a reduced density compared to standard PA6 GF 40 Technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GF 40 8 L natural (7817) is a 40% glass fibre reinforced, heat stabilised and food-approved polyamide-blend with a reduced density compared to standard PA6 GF 40 Technical components that are in contact with food, where a weight and cost reduction is required

AKROMID® B3 GF 50 4 L black (7833) is a 50% glass fibre reinforced, hydrolysis stabilised polyamide-blend with a reduced density compared to standard PA6 GF 50 Technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GFM 10/20 1 L black (4679) is a 10% glass fibre reinforced and 20% mineral filled, heat stabilised polyamide-blend with a reduced density compared to standard PA6 GF10 + M20 Optical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GFM 10/20 1 L natural (5357) is a 10% glass fibre reinforced and 20% mineral filled, heat stabilised polyamide-blend with a reduced density compared to standard PA6 GF10 + M20 Optical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GK 30 1 L black (4674) is a 30% glass bead filled and heat stabilised polyamide-blend with a reduced density compared to standard PA6 GB 30 Mainly technical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 GM 10/20 1 L black (4646) is a 10% glass fibre reinforced, 20% glass bead filled and heat stabilised polyamide-blend with a reduced density compared to standard PA6 GF10 + GB20 Optical components in the automotive and electronic industry, where a weight and cost reduction is required

AKROMID® B3 ICF 10 1 L black (5514) is a 10% carbonfiber reinforced polyamide-blend with medium stiffness and strength with a reduced density compared to standard Mechanically high stressed parts in all industri

AKROMID® B3 ICF 20 1 L black (5296) is a 20% carbon fibre reinforced, heat stabilised polyamide-blend with high flexural strength, good sliding properties and a reduced density compared to standard PA6 ICF 20 Mechanically high stressed parts in all industries

Heat resistant

Impact modified

30% Glass-Reinforced Nylon/Polypropylene Alloy Resin (PA6)

30% Mineral/Glass-Reinforced Nylon/Polypropylene Alloy Resin (PA6), Ford Color Match

Polyamide 6/Polypropylene, reinforced with 30% of glass fiber, heat aging stabilized, lubricated for injection moulding with improved mechanical properties. Epimix PA6/PP glass fiber reinforced compounds are used in all sectors of industry, offering a good balance of thermal and mechanical properties. This material is available in natural and colours on request.

This data represents typical values that have been calculated from all products classified as: Generic Nylon 6+PP - Glass Fiber This information is provided for comparative purposes only.