C28 GF 25 FRT grey (7986) is a 25% glass fiber reinforced, halogen-free flame retardant and easy flowing polyamide blend with a blue color. To achieve an excellent surface quality a mould temperature of at least 120 °C is necessary. Public-Transportation, especially train seats

C28 GF 25 FRT grey (7560) is a 25% glass fiber reinforced, halogen-free flame retardant and easy flowing polyamide blend with a grey color. To achieve an excellent surface quality a mould temperature of at least 120 °C is necessary. Public-Transportation, especially train seats

C28 GF 25 FRT natural (7332) is a 25% glass fiber reinforced, halogen-free flame retardant and easy flowing polyamide blend with a light inherent color. To achieve an excellent surface quality a mould temperature of at least 120 °C is necessary. Public-Transportation, especially train seats

Good appearance, High flow, GF50%

Alcohol dissolvable, nylon coating

Transparency

Flexibilty

Alcohol dissolvable, nylon coating

Hot melt adhesive

PANT D1000 is a unfilled, high flowability and excellent mechanical performance based on a semicrystalline polyamide with aromatic copolyamide.

PANT D3000 is a unfilled, high flowability and excellent mechanical performance based on a semicrystalline polyamide with aromatic copolyamide.

PANT I1000 is a unfilled, high flowability and excellent mechanical performance based on a semicrystalline polyamide with aromatic copolyamide.

PANT T1000 is a unfilled, low water absorption ,high flowability and excellent mechanical performance based on a semicrystalline polyamide with aromatic copolyamide.

This data represents typical values that have been calculated from all products classified as: Generic Nylon Copolymer This information is provided for comparative purposes only.

iOn™ Nylon copolymer is an engineering grade 3D printing material that can be used in demanding industrial applications due to its high mechanical, thermal, and chemical performance. iOn™ Nylon has excellent resistance to many chemicals - including solvents, fuels, alcohols, and lubricants. Offering a low gloss matte finish, iOn™ is ideal for technical components that require real-world functional performance. iOn™ Nylon is suitable for use in practically all consumer-grade FDM/FFF printers that have a heated print bed. Made by 3DXTECH® in the USA.

PA 4500 Filament is a low warp, neat nylon copolymer that has good lay flat/low warp properties, excellent appearance, strength in both XY and XZ directions, toughness, and can be printed at lower temps (240-260° C). Applications for this material include component production of less than 20,000 per year with complex geometries that require good wear properties and appearance but also strength and durability, such as slides, screen printing pallets, automation sleds, adaptors for fluid and materials handling, end-of-arm tooling (EOAT), masking covers, die cast models and patterns, clips, covers, housings, and gears. Advantages Along with easier printability, PA 4500 filament also delivers better appearance, over 100% elongation at break and better overall strength compared to other commercial PA’s and products like PETg and PLA.

NYCOA 2137 is low viscosity Nylon copolymer resin that exhibits excellent transparency. The resin was developed especially for applications requiring transparency in thickness up to 5 mm, while retaining the properties and chemical resistance inherent to nylon 6. NYCOA 2137 has been specifically designed to offer easy processability. It can be processed on conventional injection equipment designed to process standard grades of nylon. NYCOA 2137 is available with custom additive packages: heat stabilizer and/or UV stabilizer. Typical injection molding applications include sight glasses, chemical splash goggles, fashion eyeglass frame, high-voltage switch casings, filter housings, pump casings, flow meters, liquid-level indicators, and filter bowls for gas.

NYCOA 2276 is a Nylon copolymer developed specially for applications that demand a high degree of toughness and flexibility. Its moderately high melt viscosity processes easily on conventional extrusion equipment and yields products with extremely high tenacity and strength. NYCOA 2276 is available with custom additive packages including heat stabilizers, UV stabilizers, or customer colors. Typical applications include premium weed-eater monofilament and fishing line.

NYCOA 2277 G30I is a 30% glass fiber reinforced, impact modified, Nylon Copolymer resin used for injection molding. This grade features excellent strength and stiffness, dimensional stability, and a lower melting point vs. Nylon 6. NYCOA 2277 G30I is also available in UV stable grades, as well as custom colors. Typical applications include sporting goods, power tool housing, and lawn & garden equipment parts.

NYCOA 2277 is a Nylon copolymer developed specially for applications that demand a high degree of toughness and flexibility. Its moderately high melt viscosity processes easily on conventional extrusion equipment and yields products with extremely high tenacity and strength. NYCOA 2277 is available with custom additive packages including heat stabilizers, UV stabilizers, or customer colors. Typical applications include film, sheet, and fishing line.

- Heat stabilized nylon copolymer with 14% glass fiber reinforcement - Suitable for such uses as under-the-hood fluid reservoirs - Maximum clarity is achieved by using low mold temperatures - Developed to have excellent light transmittance combined with high strength, stiffness, and resistance to automotive type fluids

Paramide® ST Clear is a high viscosity nylon copolymer. Paramide® ST Clear is a clear and durable material used in applications which have demanding requirements. This resin has a unique combination of properties which consist of the following: - Paramide® ST Clear is both Strong and Ductile - Optically Clear (3mm Specimen: Total Transmittance > 91%) - Excellent Chemical Resistance including Ethanol (Alcohols) - Superior Surface Energy for Paint-ability - ISO 10993 Part 5 - Bisphenol-A (BPA) Free

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® B 409 is a high molecular weight, high melting temperature range, partially crystalline copolyamide delivered in pellet form. The special interest of this product is the combination of high melting temperature and high melt viscosity. Platamid® B 409 can be applied out of a cresolic solution. The thermal activation of the hot melt layer can be accomplished by means of induction of hot air.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® H 005 is a standard thermoplastic co-polyamide hot melt adhesive available in pellet form. This medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® H 005 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc). Platamid® H 005 has a very good dry cleaning resistance and washing resistance up to 60°C.

Copolyamide Hot Melt Adhesive / Textile Applications Platamid® H 106 Powderis a very low melt copolyamide adhesive powder for the production of fusible interlinings. Platamid® H 106 Powder is particularly useful where bonding temperature low and short bonding time are required for sensitive shell fabrics. Platamid® H 106 Powder has an excellent dry cleaning resistance and washing resistance up to 40°C.

Copolyamide Hot Melt Adhesive Platamid® H 2513 is a standard thermoplastic copolyamide hot melt adhesive available in pellet form. This low to medium melt viscosity, fast re-crystallizing grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® H 2513 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc).

Copolyamide Hot Melt Adhesive / Textile Applications Platamid® H 2513 Powder is a medium melt viscosity copolyamide adhesive powder for the production of fusible interlinings. Platamid® H 2513 Powder offers an excellent laundry resistance up to 60°C and an excellent resistance to all kind of steam treatment.

Copolyamide Hot Melt Adhesive Platamid® H 2516 is a thermoplastic copolyamide hot melt adhesive available in pellet form. This fast re-crystallizing grade has been developed to manufacture hot-melt webs, nets and mono- and multi-filaments. Platamid® H 2516 offers a very good adhesion to all kinds of textile substrates based on native and synthetic fibers. Additionally Platamid® H 2516 provides elastomeric properties and high water vapor transmission rate.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® H 2519 is a thermoplastic co-polyamide hot melt adhesive available in pellet form. This medium melt viscosity, fast re-crystallizing grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® H 2519 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc). In addition, Platamid® H 2519 also exhibits strong adhesion onto rigid and plasticized PVC as well as ABS, epoxy resin, PU, etc. Dense layers of Platamid® H 2519 are known to have barrier properties against PVC plasticizer migration. Platamid® H 2519 is also characterized by a high content of Bio Based Carbon, making it a bio based solution to difficult-to-solve bonding problems.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® H 2707 is a standard thermoplastic copolyamide hot melt adhesive available in pellet form. This medium to high melt viscosity grade is particularly suitable for manufacturing webs, mono- and multi-filaments, and films by extrusion. Platamid® H 2707 offers a good adhesion at low fusing conditions to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc.).

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® HX 2544 is a standard thermoplastic co-polyamide hot melt adhesive available in pellet form. This very low melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® HX 2544 offers a good adhesion at low fusing conditions to various polar substrates (thermoplastics, thermosets, metal natural fibers, and more). Platamid® HX 2544 has good dry cleaning resistance and washing resistance up to 60°C.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® HX 2592 is a specialty thermoplastic co-polyamide hot melt adhesive available in pellet form. This low to medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® HX 2592 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal natural fibers, and more). In addition,Platamid® HX 2592 also exhibits strong adhesion onto rigid and plasticized PVC as well as ABS, epoxy resin, PU etc. Dense layers of Platamid® HX 2592 are known to have barrier properties against PVC plasticizer migration. Platamid® HX 2592 is also characterized by a very high content of bio-based carbon (80%), making it a bio-based solution to difficult-to-solve bonding problems.

Copolyamide Hot Melt Adhesive / Textile Applications Platamid® HX 2667 Powder is a medium melt viscosity copolyamide adhesive powder for the production of fusible interlinings. Platamid® HX 2667 Powder offers excellent laundry resistance up to 60°C and an excellent resistance to all kind of steam treatment.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® M 1276 is a thermoplastic co-polyamide hot melt adhesive available in pellet form. This medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® M 1276 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal natural fibers, etc). In addition, Platamid® M 1276 also exhibits strong adhesion onto rigid and plasticized PVC as well as ABS, epoxy resin, PU etc. Dense layers of Platamid® M 1276 are known to have barrier properties against PVC plasticizer migration.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® M 1657 is a standard thermoplastic co-polyamide hot melt adhesive available in pellet form. This very low melt viscosity, fast re-crystallizing grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments. Platamid® M 1657 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal natural fibers, etc). Platamid® M 1657 has a very good dry cleaning resistance and washing resistance up to 40°C.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® M 1757 is a standard thermoplastic co-polyamide hot melt adhesive available in pellet form. This low to medium melt viscosity, fast re-crystallizing grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® M 1757offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal natural fibers, etc). Platamid® M 1757has a very good dry cleaning resistance and washing resistance up to 60°C.

Copolyamide Hot Melt Adhesive / Extrusion Applications Platamid® M 2468 is a standard thermoplastic copolyamide hot melt adhesive available in pellet form. This low to medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® M 2468 offers a good adhesion at low fusing conditions to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc). Platamid® M 2468 has good dry cleaning resistance and washing resistance up to 60°C.

Promyde B730 P is a lubricated copolyamide with improved transparency. CHARACTERISTICS Promyde B730 P is a copolyamide with improved transparency at high thickness, lubricated for technical injection moulding. Its main characteristics are transparency, easy flowing and easy mould filling whilst maintaining excellent polyamide chemical and mechanical properties. APPLICATIONS Promyde B730 P is appropriate for the injection moulding of unfilled polyamide 6 applications where improved transparency is desired in applications under 80ºC

Promyde B730 is a copolyamide with improved transparency specially designed for 3D printing filament extrusion. CHARACTERISTICS Promyde B730 is a copolyamide with improved transparency at high thickness, specially developed for 3D printing filament extrusion. Its main characteristics are transparency, easy flowing and processing whilst maintaining excellent polyamide chemical and mechanical properties. It also shows a good adherence between layers and low shrinkage when printing. APPLICATIONS Promyde B730 is appropriate for the extrusion of unfilled nylon filament for 3D printing applications.