Polyamide (Nylon): Nylon 610
Product | Availability | Product Description |
---|---|---|
Grilamid® XE 4105 black 9992 | Asia Pacific | |
Grilamid® XE 4105 nat | Asia Pacific | |
Grilamid® XE 4128 black 9221 | Asia Pacific | |
Grilamid® XE 4129 black 9020 | Asia Pacific | |
Grilamid® XE 4192 black 9992 | Africa & Middle East | |
HiDura™ S1X NT | Asia Pacific |
HiDura S1X NT is a low-medium viscosity PA610 grade with 62% bio-based content. It is suitable for monofilament, film, and general purpose injection molding applications. PA610 offers a unique balance of thermal, mechanical, and physical properties.
|
HiDura™ S2X NT | Asia Pacific |
HiDura S2X NT is a medium viscosity PA610 grade with 62% bio-based content. It is suitable for monofilament, film, and general purpose injection molding applications. PA610 offers a unique balance of thermal, mechanical, and physical properties.
|
HiDura™ S3MG30H BK0835 | Asia Pacific |
HiDura S3MG30H BK0835 is a 30% glass fiber reinforced, heat stabilized polyamide 610 with 42% bio-based content for injection molding applications.
|
HiDura™ S3X NT | Asia Pacific |
HiDura S3X NT is a viscosity PA610 grade with 62% bio-based content. It is suitable for monofilament, film, and general purpose injection molding applications; it can also be used for molded applications where high abrasion resistance and ductility are key requirements. PA610 offers a unique balance of thermal, mechanical, and physical properties.
|
HiFill® PA6/10 BK | North America | |
HiFill® PA6/10 GF30 L | North America | |
HiFill® PA6/10 GF45 HS L | North America |
1216103
|
HiFill® PA6/10 GF50 L | North America | |
InElec® PA610CF10 | Africa & Middle East |
10% CARBON FIBER REINFORCED NYLON 610
|
InElec® PA610CF25GF15 | Africa & Middle East |
25% CARBON FIBER AND 15% GLASS FIBER REINFORCED NYLON 610
|
InElec® PA610CF30 | Africa & Middle East |
30% CARBON FIBER REINFORCED NYLON 610
|
InLube® PA610CF15TF15 | Africa & Middle East |
15% CARBON FIBER REINFORCED 15% PTFE LUBRICATED NYLON 610
|
InLube® PA610CF15TF15FRHS | Africa & Middle East |
15% CARBON FIBER REINFORCED, 15% PTFE LUBRICATED, FLAME RETARDED AND HEAT STABILIZED NYLON 610
|
InLube® PA610CF25TF15 | Africa & Middle East |
25% CARBON FIBER REINFORCED 15% PTFE LUBRICATED NYLON 610
|
InLube® PA610GF30SI2 | Africa & Middle East |
30% GLASS FIBER REINFORCED 2%SILICONE LUBRICATED NYLON 610
|
InLube® PA610GF30SI2MD | Africa & Middle East |
30% GLASS FIBER REINFORCED AND 2% SILICONE LUBRICATED NYLON 610 (LOCKED MEDICAL FORMULATION)
|
InLube® PA610GF30TF15 | Africa & Middle East |
30% GLASS FIBER REINFORCED 15% PTFE LUBRICATED NYLON 610
|
InLube® PA610GF30TF15FR BK002 | Africa & Middle East |
30% GLASS FIBER REINFORCED, 15% PTFE LUBRICATED, FLAME RETARDED, BLACK NYLON 610
|
InLube® PA610GF35TF5 | Africa & Middle East |
35% GLASS FIBER REINFORCED 5% PTFE LUBRICATED NYLON 610
|
InLube® PA610GF50SI2MD | Africa & Middle East |
50% GLASS FIBER REINFORCED, 2% SILICONE LUBRICATED NYLON 610
|
InLube® PA610TF10 | Africa & Middle East |
10% PTFE LUBRICATED NYLON 610
|
InStruc® PA610GF10 | Africa & Middle East |
10% GLASS FIBER REINFORCED NYLON 610
|
InStruc® PA610GF20 | Africa & Middle East |
20% GLASS FIBER REINFORCED NYLON 610
|
InStruc® PA610GF30 | Africa & Middle East |
30% GLASS FIBER REINFORCED NYLON 610
|
Isocor™ 6100 | Europe |
Isocor™ 6100 is a medium viscosity PA-610. This resin is specifically suited for applications requiring low moisture absorption and greater dimensional stability. Isocor™ 6100 is also used in applications requiring good electrical insulation properties. This resin can be processed using conventional techniques.
Typical applications for 6100 include:
- cable jacketing
- film extrusions
- monofilaments / bristles
- automotive tubing
- electrical connectors
|
Isocor™ 6104 | Europe |
Isocor™ 6104 is a low viscosity PA-610. This resin is specifically suited for applications requiring low moisture absorption and greater dimensional stability. Isocor™ 6104 is also used in applications requiring good electrical insulation properties. This resin can be processed using conventional techniques.
Typical applications for 6104 include:
- cable jacketing
- monofilaments / bristles
- bonded magnet binder
- electrical connectors
|
Isocor™ 6105 | Europe |
Isocor™ 6105 is a medium viscosity PA-610. This resin is specifically suited for applications requiring low moisture absorption and greater dimensional stability. Isocor™ 6105 is also used in applications requiring improved abrasion resistance. This resin can be processed using conventional techniques.
Typical applications for 6105 include:
- cable jacketing
- film extrusions
- monofilaments / bristles
- automotive tubing
|
Isocor™ CN30BT | Europe |
Isocor™ CN30BT is a medium viscosity PA-610 based copolymer. This transparent nylon resin is specifically suited for applications requiring increased solvent resistance and clarity. Isocor™ CN30BT is also used in applications requiring high modulus and low temperature impact properties. This resin can be processed using conventional techniques.
Typical applications for CN30BT include:
- injection molding
- film extrusion
|
Isocor™ CN30XT | Europe |
Isocor™ CN30XT is a low viscosity PA-610 based copolymer. This transparent nylon resin is specifically suited for applications requiring increased solvent resistance and UV stability. Isocor™ CN30XT is also used in applications requiring high modulus and low temperature impact properties. This resin can be processed using conventional techniques.
Typical applications for CN30XT include:
- injection molding
- film extrusion
|
Isocor™ HW115SI | Europe |
Isocor™ HW115SI is a high viscosity PA-610. This resin is specifically suited for applications requiring low moisture absorption, greater dimensional stability, and improved abrasion resistance. This resin can be processed using conventional techniques.
Typical applications for HW115SI include:
- cable jacketing
- film extrusions
- monofilaments / bristles
- automotive tubing
|
Isocor™ HW29TL | Europe |
Isocor™ HW29TL is a ultra low viscosity PA-610 with excellent melt flow characteristics. Isocor™ HW29TL is specifically formulated for thin wall or high speed injection molding applications. This resin is suitable for applications requiring low moisture absorption and greater dimensional stability. This resin can be processed using conventional techniques.
Typical applications for Isocor™ HW29TL include:
- thin-wall injection molding
- electrical connectors
- small parts-high output
|
Isocor™ HW69SI | Europe |
Isocor™ HW69SI is a medium viscosity PA-610. This resin is specifically suited for applications requiring low moisture absorption and greater dimensional stability. Isocor™ HW69SI is also used in applications requiring good electrical insulation properties. This resin can be processed using conventional techniques.
Typical applications for HW69SI include:
- cable jacketing
- film extrusions
- monofilaments / bristles
- automotive tubing
- electrical connectors
|
Isocor™ SC45BT | Europe |
Isocor™ SC45BT is a medium viscosity PA-610 based copolymer. This resin is specifically suited for clear applications requiring excellent solvent resistance and impact properties. Isocor™ SC45BT is also used in applications requiring improved dimensional stability. This resin can be processed using conventional techniques.
Typical applications for SC45BT include:
- injection molding
- film extrusions
- monofilaments / bristles
|
Jieda PA610 Resin | Asia Pacific |
PA610 (Polyamide 610 or nylon 610) is an ivory-white to light yellow translucent solid made by the condensation polymerization of the neutralized salt of sebacic acid and hexanediamine. It has toughness, dimensional stability, wear resistance, oil and alkali resistance, low water absorption, and self-lubricating property. Processing methods of PA610 include extrusion, injection molding, and blow molding. End use applications include gears, bearings, cushions, sealants, insulators, electronic boards, thin films, filaments, etc.
|
Latamid SP1 G/30 | Africa & Middle East |
Polyamide 6.10 (PA6.10) based compound. Glass fibres. Low moisture absorption.
|