Polyamide (Nylon): Nylon, Unspecified
Product | Availability | Product Description |
---|---|---|
Edgetek™ ET6900-8003 LD NC001 | Asia Pacific |
Low density polyamide compound
|
Edgetek™ PA-45GF/000 BK005 | Asia Pacific | |
Elastomax™ 1000 | North America |
Elastomax™ 1000 is a pink tinted, high elongation, heat-stabilized blown film produced from modified polyamide resin. It is recommended as a bagging film for advanced composite fabrication where flexibility under adverse atmospheric conditions is essential. It requires fewer pleats than conventional bagging films and has better flex crack resistance. Elastomax™ 1000 film is available in sheet, tube and V-sheet in widths ranging from 48" to 80".
|
Electrafil® M-1526/EC | Africa & Middle East | |
Electrafil® TPX-HTN-01045 A | North America | |
Electrafil® TPX-PAA-05023 | North America |
Partially Aromatic Nylon
|
Elvamide® 8061 | Africa & Middle East |
Polyamide Multipolymer
|
Elvamide® 8061Z | Africa & Middle East |
Polyamide Multipolymer
|
Elvamide® 8063 | Africa & Middle East |
Polyamide Multipolymer with Improved Gel Resistance in Solutions
|
Enplury® PARA K5050 | Latin America |
Enplury PARA K5050 is a 50% glass fiber reinforced polyarylamid with very high stiffness and strength, even in conditioned state
Applications: Components with high dimensional stability, independent from moisture content. Enplury PARA K5050 is an alternative for aluminium and zinc diecast alloys.
|
Enplury® PARA K6060 | Latin America |
Enplury PARA K6060 is a 60% glass fiber reinforced polyarylamid with very high stiffness and strength, even in conditioned state.
Applications: Components with high dimensional stability, independent from moisture content. Enplury PARA K6060 is an alternative for aluminium and zinc diecast alloys.
|
EPITEC® NYLON-265 | North America | |
ESD 4485 | Africa & Middle East |
Carbon Fiber - ESD Protection - Electrically Conductive
|
Fiberfil® M-2494 BK | North America |
Industrial Grade
|
Frianyl® XS3 S GF40 V0 BK 9005/DD | Africa & Middle East |
Semi-aromatic polyamide compound, 40% glass fibre, flame retardant, halogens free, UL listed [email protected]
Compound designed for safety parts with high mechanical requirements, typically used to replace metal due to the high stiffness and strength, stable after conditioning. Combines flame retardant properties with better creep behavior and dimensional stability vs. an equivalent PA66 grade, with lower warpage and good surface finish.
|
Generic Nylon, Unspecified - Carbon Fiber | Africa & Middle East |
This data represents typical values that have been calculated from all products classified as: Generic Nylon, Unspecified - Carbon Fiber
This information is provided for comparative purposes only.
|
Generic Nylon, Unspecified - Glass Fiber, Long | Africa & Middle East |
This data represents typical values that have been calculated from all products classified as: Generic Nylon, Unspecified - Glass Fiber, Long
This information is provided for comparative purposes only.
|
Generic Nylon, Unspecified - Glass Fiber | Africa & Middle East |
This data represents typical values that have been calculated from all products classified as: Generic Nylon, Unspecified - Glass Fiber
This information is provided for comparative purposes only.
|
Generic Nylon, Unspecified | Africa & Middle East |
This data represents typical values that have been calculated from all products classified as: Generic Nylon, Unspecified
This information is provided for comparative purposes only.
|
Gravi-Tech™ GT6900-8015 GRV NC001 | Asia Pacific |
Low density polyamide compound
|
Grilamid® TR XE 4139 black 9231 | Africa & Middle East | |
Grilon® BM 16 NATURAL | Africa & Middle East |
Grilon BM 16 natural is a medium viscosity multi-polyamide with a low melting point.
Grilon BM 16 natural has the following features:
- High flexibility and toughness
- Very good orientation and thermoforming properties
- High shrinkage
- Very good transparency
- Low melting point (164°C)
- Low glass transition point (44°C)
Application Examples
Grilon BM 16 natural has been specially developed for cast and blown films coextruded with temperature sensitive polymers (PVDC,
EVOH).
Grilon BM 16 natural is suitable flexible packaging for foodstuffs e.g. (shrinkable) film for consumer packaging of meat, cheese,
sausage or fish.
|
Grilon® BM 17 | Africa & Middle East | |
HANGZHOU JINZHOU TDPA-40 JZTD001 (JZ-JMH-181) | Africa & Middle East |
PA+40% Mineral modification
|
HiFill FR® TPX-HTN-01031 | North America | |
HiFill® HTN 0153 S1 AHW NAT | North America | |
HiFill® TPX-HTN-01026 A | North America | |
HiFill® TPX-HTN-01027 A | North America | |
HiFill® TPX-HTN-01033 A | North America | |
HiFill® TPX-HTN-01036 A | North America | |
HiFill® TPX-HTN-01040 A | North America | |
HiFill® TPX-HTN-01043 A | North America | |
HiFill® TPX-HTN-01092 A | North America | |
HiFill® TPX-HTN-02028 A | North America | |
HiFill® TPX-HTN-03002 A | North America | |
HiFill® TPX-HTN-03003 A | North America |
High Temperature Nylon
|
HONES® Conductive Nylon | Asia Pacific |
Features
- Inflaming retarding V-0
- Excellent physical, electrical and mechanical properties
- Chemical and grease resistance
- The creep resistance and fatigue resistance
- Dimensional stability, can be used for large, thick wall forming parts
- Insulation of high thermal conductivity
Applications
- For LED LCD backlight tube, LED TV, LED lamps such as MR16; Also can replace the general aluminum heat sink
- For LED lamp, lamp, bulb
- Heat radiating parts for household appliances
- Heat radiating parts for industrial products
|
HYPERIER® IP1306B | Asia Pacific |
Description
Barrier thermoplastic, Nylon blend with HDPE
Application
Agrochemical Container,SORE* Fuel Tank, PFC
|
Infino MKD-1016 | Africa & Middle East | |
Jabil PA 4000 NATURAL | North America |
A very durable nylon powder, PA 4000 has well-balanced material characteristics that are ideal for a wide variety of applications. The detail resolution, excellence surface finish, and 34% elongation at break point ensures this bright white material meets the needs of your product requirements. The chemical resistance and various finishing possibilities make PA 4000 ideal for open-sourced laser sintering 3D printers.
Similar to a PA 12, PA 4000 should be selected for applications that require functional testing, low to midvolume production runs or prototyping. Even though this material should be processed in an inert environment, PA 4000 does not need to be dried which adds to the convenience of use. Some common applications include (but are not limited to): functional prototypes, complex geometries, low temperature duct work, caster housings (in additional to other housings and enclosures), and parts with snap-fit features.
Advantages
Excellent elongation and impact strength are key benefits of PA 4000. Powder flowability and wet out is exceptional, producing dense parts with an excellent surface finish. PA 4000 has a potential for high recyclability and displays color stability.
|