Polypropylen (PP) by Americhem
Produkt | Verfügbarkeit | Produktbeschreibung |
---|---|---|
ColorFast® CPP2 | Afrika und Mittlerer Osten |
CPP2 is a low melt injection molding grade of polypropylene impact copolymer with excellent heat stability and good cold temperature impact resistance. It is suitable for a wide range of applications.
|
ColorFast® PP1-2000 | Afrika und Mittlerer Osten |
Homopolymer that can be processed by injection molding
|
ColorFast® PP1-FRV2 | Afrika und Mittlerer Osten |
PP1-FRV2 is a high melt flow injection molding grade unreinforced polypropylene. It is UL94 V-2 flame rated.
|
ColorFast® PP2-8800FR | Afrika und Mittlerer Osten |
PP2-8000FR is an injection molding grade of unreinforced polypropylene impact copolymer. It consists of a non-halogenated FR system with a flame rating of V-0/3mm.
|
ColorRx® PP1-1000RX | Afrika und Mittlerer Osten |
PP1-1000RX is a medium flow grade injection molding grade of polypropylene (PP) homopolymer with good chemical resistance and processability. It is suitable for healthcare applications sterilizable by EtO, steam, and gamma radiation up to 25 kGy.
|
ColorRx® PP1-1200RX | Afrika und Mittlerer Osten |
PP1-1200RX is a medium flow grade injection molding grade of polypropylene (PP) homopolymer with good stiffness and impact strength. It is suitable for healthcare applications sterilizable by EtO and steam at 121°C.
|
ColorRx® PP1-2000LMRX | Afrika und Mittlerer Osten |
PP1-2000LMRX is a high flow grade injection molding grade of Polypropylene (PP) homopolymer specifically for laser marking. It is suitable for healthcare applications and sterilizable by EtO and steam at 121°C.
|
ColorRx® PP1-2000RX | Afrika und Mittlerer Osten |
PP1-2000RX is a high flow grade injection molding grade of Polypropylene (PP) homopolymer with high stiffness and good impact strength. It is suitable for healthcare applications and sterilizable by EtO and steam at 121°C.
|
ColorRx® PP1-2800RX | Afrika und Mittlerer Osten |
PP1-2800RX is a high flow injection molding grade of Polypropylene (PP) homopolymer with low warpage. It is suitable for healthcare applications and sterilizable by EtO and steam at 121°C.
|
ColorRx® PP1-7500RX | Afrika und Mittlerer Osten |
PP1-7500RX is a very high flow grade injection molding grade of Polypropylene (PP) homopolymer with high stiffness. It is suitable for healthcare applications and sterilizable by EtO and steam at 121°C.
|
ColorRx® PP2-2700RX | Afrika und Mittlerer Osten |
PP2-2700RX is a high flow injection molding grade of Polypropylene (PP) random copolymer with high stiffness and impact strength. It is suitable for healthcare applications and sterilizable by EtO, steam at 121°C, and gamma radiation.
|
ColorRx® PP2-3500RX | Afrika und Mittlerer Osten |
PP2-3500RX is a high flow injection molding grade of polypropylene (PP) random copolymer with high clarity. It is suitable for healthcare applications and sterilizable by EtO and steam at 121°C.
|
InElec® PPAS | Afrika und Mittlerer Osten |
PERMANENTLY ANTI-STATIC POLYPROPYLENE
|
InElec® PPCF10 | Afrika und Mittlerer Osten |
10% CARBON FIBER REINFORCED ELECTRICALLY CONDUCTIVE POLYPROPYLENE
|
InElec® PPCF15 | Afrika und Mittlerer Osten |
15% CARBON FIBER REINFORCED, ELECTRICALLY CONDUCTIVE POLYPROPYLENE
|
InElec® PPCF15HS | Afrika und Mittlerer Osten |
15% CARBON FIBER REINFORCED, ELECTRICALLY CONDUCTIVE POLYPROPYLENE
|
InElec® PPCF20 | Afrika und Mittlerer Osten |
20% CARBON FIBER REINFORCED, ELECTRICALLY CONDUCTIVE POLYPROPYLENE
|
InElec® PPCF25 | Afrika und Mittlerer Osten |
25% CARBON FIBER REINFORCED, ELECTRICALLY CONDUCTIVE POLYPROPYLENE
|
InElec® PPCF30 | Afrika und Mittlerer Osten |
30% CARBON FIBER REINFORCED, ELECTRICALLY CONDUCTIVE POLYPROPYLENE
|
InElec® PPGF5 | Afrika und Mittlerer Osten |
ELECTRICALLY CONDUCTIVE, 5% GLASS FIBER REINFORCED POLYPROPYLENE
|
InElec® PPHF | Afrika und Mittlerer Osten |
ELECTRICALLY CONDUCTIVE, HIGH FLOW POLYPROPYLENE
|
InLube® PPCF15TF15 | Afrika und Mittlerer Osten |
15% CARBON FIBER REINFORCED AND 15% PTFE FILLED POLYPROPYLENE
|
InLube® PPGF20TF15HSFC | Afrika und Mittlerer Osten |
20% GLASS FIBER REINFORCED, 15% PTFE LUBRICATED HEAT STABILIZED POLYPROPYLENE BASED ON FDA COMPLIANT RAW MATERIALS.
|
InLube® PPGF30TF15SI4 | Afrika und Mittlerer Osten |
30% GLASS FIBER REINFORCED, 15% PTFE/4% SILICONE LUBRICATED POLYPROPYLENE
|
InLube® PPHTF10 | Afrika und Mittlerer Osten |
10% PTFE LUBRICATED POLYPROPYLENE
|
InLube® PPSI4 | Afrika und Mittlerer Osten |
PPSI4 is an injection molding grade polypropylene with 4% silicone lubricant.
|
InLube® PPTF15 | Afrika und Mittlerer Osten |
15% PTFE LUBRICATED, POLYPROPYLENE
|
InLube® PPTF20HSLE | Afrika und Mittlerer Osten |
20% TEFLON LUBRICATED HEAT STABILIZED POLYPROPYLENE BASED ON FDA COMPLIANT RAW MATERIALS
|
InStruc® PD702 GF30 | Afrika und Mittlerer Osten |
30% GLASS FIBER REINFORCED CHEMICALLY COUPLED POLYPROPYLENE
|
InStruc® PP2GFMIN40F | Afrika und Mittlerer Osten |
PP2GFMIN40F is a 40% glass fiber / mineral co-reinforced injection molding grade of Polypropylene. It is FDA compliant and suitable for food contact applications.
|
InStruc® PPCGF50CC | Afrika und Mittlerer Osten |
50% GLASS FIBER REINFORCED, CHEMICALLY COUPLED, POLYPROPYLENE
|
InStruc® PPGB10HF | Afrika und Mittlerer Osten |
10% GLASS BEAD REINFORCED, HIGH FLOW POLYPROPYLENE
|
InStruc® PPGB15 WT083 | Afrika und Mittlerer Osten |
InStruc® PPGB15 WT083 is a 15% glass bead reinforced polypropylene. This product is white in color and can be used in a variety of applications that require chemical resistance, heat resistance, and weight reduction.
|
InStruc® PPGB20 | Afrika und Mittlerer Osten |
20% GLASS BEAD REINFORCED POLYPROPYLENE
|
InStruc® PPGB30 | Afrika und Mittlerer Osten |
30% GLASS BEAD REINFORCED POLYPROPYLENE
|
InStruc® PPGB40 | Afrika und Mittlerer Osten |
40% GLASS BEAD REINFORCED POLYPROPYLENE
|
InStruc® PPGF10 | Afrika und Mittlerer Osten |
10% GLASS FIBER REINFORCED POLYPROPYLENE
|
InStruc® PPGF10CC | Afrika und Mittlerer Osten |
10% CHEMICALLY COUPLED GLASS FIBER REINFORCED POLYPROPYLENE
|
InStruc® PPGF10GB15CC | Afrika und Mittlerer Osten |
10% GLASS FIBER REINFORCED AND 15% GLASS BEAD FILLED, CHEMICALLY COUPLED POLYPROPYLENE
|
InStruc® PPGF10HSCC | Afrika und Mittlerer Osten |
10% CHEMICALLY COUPLED GLASS FIBER REINFORCED, HEAT-STABILIZED POLYPROPYLENE
|