GETILAN: is the trade-mark of our crosslinkable polythene. GETILAN GPE/452 BLACK P: high density chemically crosslinkable polythene for insulated aerial cables. It is a conveniently grafted polythene able to react in presence of moisture and of a catalyst. We normally suggest our catalyst type MAC/203 HS. REACTION BETWEEN GRAFTING AND CATALYST: These two compounds, separately stored, must be mixed before starting extrusion in the ratio: GRAFTING/CATALYST 95/5 Certify: HD 626 S1 TIX 7, NF C 33-209

ICORENE® 1505 Black 9001 is a crosslinkable black high density polyethylene specifically developed for rotational moulding. This grade is particularly suitable for use in applications requiring exceptional impact resistance at low temperature, toughness and excellent ESCR such as fuel tanks. The original cross linking system used is low odor and allows a perfect moulding of the part free of pinholes. ICORENE® 1505 Black 9001 is TÜV approved, protocolnr 163XS0034-00.

ICORENE® 1505 is a crosslinkable natural high density polyethylene specifically developed for rotational moulding. This grade is particularly suitable for use in applications requiring exceptional impact resistance at low temperature. toughness and excellent ESCR such as fuel tanks. The specially developed cross linking system used has lower odor than typical materials of this type and allows for perfect moulding of the part - free of pinholes.

ICORENE® 1506 is a crosslinkable high density polyethylene specifically developed for rotational moulding. This grade is particularly suitable for use in applications requiring exceptional impact resistance at low temperature, toughness and excellent ESCR such as fuel tanks. The cross linking system used allows a wider processing windows and higher PIAT can be reached.

Cross-linkable Polyethylene Compound TA 1108 HD is for use in residential and commercial applications. TA 1108 HD is primarily used in flexible pipe intended for potable hot and cold water plumbing. It is also used extensively in radiant heating applications. Crosslinked TA 1108 HD has a combination of properties which result in tubing with excellent flexibility, superior mechanical and thermal performance, and outstanding aesthetics. TA 1108 HD is suitable for SDR 9 tubing applications in continuous service at operating conditions of 140°F (60°C) and 80 psi.

Cross-linkable High Density Polyethylene Compound TA 1117 HD is for use in industrial applications. Crosslinked TA 1117 HD has a beneficial combination of high density and high gel content which result in excellent chemical, abrasion and heat resistance. The properties of TA 1117 HD make it a preferred choice for oil and gas production, mining, and other aggressive industrial applications. TA 1117 HD is suitable for continuous service at operating temperatures of 95°C (203°F).

TA 2400 CL series catalyst masterbatches are used with Kafrit NA cross-linkable PEX-b compound TA 1108 HD to produce potable water tubing. TA 2400 CL series catalyst contains color pigment and a crosslinking catalyst which will complete the Sioplas system when extruded with PEX-b compounds such as TA 1108 HD. TA 2400 CL series catalyst masterbatches also contain antioxidant & metal deactivator additives, which protect water pipes from long term degradation caused by oxidation, heat, and exposure to chlorine and active metal ions. TA 2400 CL series catalyst masterbatches include UV protection (HALS and UV absorber) for weathering exposure of the equivalent of 6 months in Arizona, as tested in accordance with ASTM F2657.

TA 2410 CX masterbatch is used with Kafrit NA cross-linkable PEX-b compound TA 1117 HD to produce CX-PE pipes. TA 2410 CX is formulated to not accelerate the crosslinking rate of CX-PE pipes, which is intended to allow produced pipe to be stored for several months at ambient conditions with minimal crosslinking taking place before installation. Pipes produced from the CX-PE compound of TA 1117 HD and TA 2410 CX may be butt fused during installation and subsequently allowed to crosslink while in service. TA 2410 CX catalyst contains color pigments, antioxidants and metal deactivator additives, which protect pipes from long term degradation caused by oxidation and heat. TA 2410 CX catalyst masterbatches include UV protection (HALS and UV absorber) for weathering exposure equivalent to six months in Arizona, as tested in accordance with ASTM F2657.

TA 2400 CL series catalyst masterbatches are used with Kafrit NA cross-linkable PEX-b compound TA 1108 HD to produce potable water tubing. TA 2400 CL series catalyst contains color pigment and a crosslinking catalyst which will complete the Sioplas system when extruded with PEX-b compounds such as TA 1108 HD. TA 2400 CL series catalyst masterbatches also contain antioxidant & metal deactivator additives, which protect water pipes from long term degradation caused by oxidation, heat, and exposure to chlorine and active metal ions. TA 2400 CL series catalyst masterbatches include UV protection (HALS and UV absorber) for weathering exposure of the equivalent of 6 months in Arizona, as tested in accordance with ASTM F2657.

TA 2400 CL series catalyst masterbatches are used with Kafrit NA cross-linkable PEX-b compound TA 1108 HD to produce potable water tubing. TA 2400 CL series catalyst contains color pigment and a crosslinking catalyst which will complete the Sioplas system when extruded with PEX-b compounds such as TA 1108 HD. TA 2400 CL series catalyst masterbatches also contain antioxidant & metal deactivator additives, which protect water pipes from long term degradation caused by oxidation, heat, and exposure to chlorine and active metal ions. TA 2400 CL series catalyst masterbatches include UV protection (HALS and UV absorber) for weathering exposure of the equivalent of 6 months in Arizona, as tested in accordance with ASTM F2657.

TA 2412 CX masterbatch is used with Kafrit NA cross-linkable PEX-b compound TA 1117 HD to produce CX-PE pipes. TA 2412 CX is formulated to not accelerate the crosslinking rate of CX-PE pipes, which is intended to allow produced pipe to be stored for several months at ambient conditions with minimal crosslinking taking place before installation. Pipes produced from the CX-PE compound of TA 1117 HD and TA 2412 CX may be butt fused during installation and subsequently allowed to crosslink while in service. TA 2412 CX catalyst contains color pigments, antioxidants, and metal deactivator additives, which protect pipes from long term degradation caused by oxidation and heat. TA 2412 CX catalyst masterbatches include UV protection (HALS and UV absorber) for weathering exposure equivalent to six months in Arizona, as tested in accordance with ASTM F2657.

TA 2400 CL series catalyst masterbatches are used with Kafrit NA cross-linkable PEX-b compound TA 1108 HD to produce potable water tubing. TA 2400 CL series catalyst contains color pigment and a crosslinking catalyst which will complete the Sioplas system when extruded with PEX-b compounds such as TA 1108 HD. TA 2400 CL series catalyst masterbatches also contain antioxidant & metal deactivator additives, which protect water pipes from long term degradation caused by oxidation, heat, and exposure to chlorine and active metal ions. TA 2400 CL series catalyst masterbatches include UV protection (HALS and UV absorber) for weathering exposure of the equivalent of 6 months in Arizona, as tested in accordance with ASTM F2657.

TA 2400 CL series catalyst masterbatches are used with Kafrit NA cross-linkable PEX-b compound TA 1108 HD to produce potable water tubing. TA 2400 CL series catalyst contains color pigment and a crosslinking catalyst which will complete the Sioplas system when extruded with PEX-b compounds such as TA 1108 HD. TA 2400 CL series catalyst masterbatches also contain antioxidant & metal deactivator additives, which protect water pipes from long term degradation caused by oxidation, heat, and exposure to chlorine and active metal ions. TA 2400 CL series catalyst masterbatches include UV protection (HALS and UV absorber) for weathering exposure of the equivalent of 6 months in Arizona, as tested in accordance with ASTM F2657.

TA 2400 CL series catalyst masterbatches are used with Kafrit NA cross-linkable PEX-b compound TA 1108 HD to produce potable water tubing. TA 2400 CL series catalyst contains color pigment and a crosslinking catalyst which will complete the Sioplas system when extruded with PEX-b compounds such as TA 1108 HD. TA 2400 CL series catalyst masterbatches also contain antioxidant & metal deactivator additives, which protect water pipes from long term degradation caused by oxidation, heat, and exposure to chlorine and active metal ions. TA 2400 CL series catalyst masterbatches include UV protection (HALS and UV absorber) for weathering exposure of the equivalent of 6 months in Arizona, as tested in accordance with ASTM F2657.

TA 2400 CL series catalyst masterbatches are used with Kafrit NA cross-linkable PEX-b compound TA 1108 HD to produce potable water tubing. TA 2400 CL series catalyst contains color pigment and a crosslinking catalyst which will complete the Sioplas system when extruded with PEX-b compounds such as TA 1108 HD. TA 2400 CL series catalyst masterbatches also contain antioxidant & metal deactivator additives, which protect water pipes from long term degradation caused by oxidation, heat, and exposure to chlorine and active metal ions. TA 2400 CL series catalyst masterbatches include UV protection (HALS and UV absorber) for weathering exposure of the equivalent of 6 months in Arizona, as tested in accordance with ASTM F2657.

Description LUTENE® XL2710BK has excellent strippability, processability for medium voltage power cables (High viscosity version of XL2700BK). Applications Easy strippable insulation shielding compound for medium voltage power cables with rated voltage up to 35kV Characteristics The advantage of LUTENE® XL2710BK over conventional strippable insulation shield compounds include: - Consistent, clean adhesion level over -40 to 70°C temperature range. - Excellent extruded surface smoothness with fewer and smaller surface protrusions over broad range of shear rates. Specification LUTENE® XL2710BK meets the property requirement of the following material specifications. - AEIC CS8 - ICEA S-94-649 - IEC 60502 - BS 6622

Description LUTENE® XL2802BK is a cross-linkable semi-conductive shielding compound for conductor and bonded insulation shielding of high voltage power cables. LUTENE® XL2802BK is compatible with both copper and aluminum conductors. LUTENE® XL2802BK was specifically developed to provide a excellent-smoothness surface yielding a more perfect interface between extruded shield and the insulation. As a result, significantly improved cable performance can be expected. LUTENE® XL2802BK has stable volume resistivity characteristics at elevated temperature. Applications Excellent-smoothness extra clean semi-conductive compound for conductor and bonded insulation shielding of high voltage power cable Characteristics - Excellent Surface Smoothness - Excellent Electrical Properties - Excellent Physical and Thermal Properties - Long-run Extrusion without Scorch Specification LUTENE® XL2802BK meets the property requirement of the following material specifications. - AEIC CS8 - AEIC CS 7-93 - IEC 60502 / IEC 60840 - ICEA S-94-649, S-66-524 / NEMA WC74

Description LUTENE® XL2808BK TR is specially designed cross-linkable semi-conductive compound for conductor shielding of medium voltage power cables. LUTENE® XL2808BK TR is compatible with both copper and aluminum conductors. LUTENE® XL2808BK TR was specifically developed to provide an excellent smoothness surface yielding a more perfect interface between extruded shield and the insulation. As a result, significantly improved cable performance can be expected. LUTENE® XL2808BK TR is recommended for use in conjunction with XL8080NTS (Cross-linked polyethylene compound) and XL8080TR (Tree-retardant cross-linked polyethylene compound) Applications Cross-linkable semi-conductive compound for conductor and bonded insulation shielding of medium voltage power cables with rated voltage up to 35kV Characteristics - Excellent Surface Smoothness - Excellent Electrical Properties - Excellent Physical and Thermal Properties - Long-run Extrusion without Scorch Specification LUTENE® XL2808BK TR meets the property requirement of the following material specifications. - AEIC CS8 - ICEA S-94-649, S-93-639 / NEMA WC74 - IEC 60502 - CENELEC HD620 - BS 6622

Applications Cross-linkable semi-conductive compound for conductor and bonded insulation shielding of medium voltage power cables with rated voltage up to 35kV Description - LUTENE ® XL2808BK has an excellent electrical properties and assists in obtaining a minimum shrinkback on aluminum conductor, especially solid conductor. - LUTENE ® XL2808BK is specifically developed to provide a smooth surface yielding a more perfect interface between the extruded shield and the insulation. - LUTENE ® XL2808BK has stable volume resistivity characteristics at elevated temperatures and is formulated with a polymer system that has demonstrated compatibility with copper conductor. Characteristics - Excellent Electrical Property - Excellent Physical and Thermal Property - Excellent Surface Smoothness Specification LUTENE ® XL2808BK meets the property requirement of the following material specifications. - AEIC CS8 - ICEA S-94-649 - IEC 60502 - BS 6622

Description LUTENE® XL2810BK has an excellent electrical properties and assists in obtaining a minimum shrinkback on aluminum conductor, especially solid conductor. LUTENE® XL2810BK is specifically developed to provide a smooth surface yielding a more perfect interface between the extruded shield and the insulation. LUTENE® XL2810BK has stable volume resistivity characteristics at elevated temperatures and is formulated with a polymer system that has demonstrated compatibility with copper conductor. Applications Cross-linkable semi-conductive compound for conductor and bonded insulation shielding of medium voltage power cables with rated voltage up to 35kV (High viscosity version of XL2808BK) Characteristics - Excellent Electrical Property - Excellent Physical and Thermal Property - Excellent Surface Smoothness Specification LUTENE® XL2810BK meets the property requirement of the following material specifications. - AEIC CS8 - ICEA S-94-649 - IEC 60502 - BS 6622

Description LUTENE® XL2902BK is a cross-linkable semi-conductive shielding compound for conductor and bonded insulation shielding of high and extra high voltage power cables. LUTENE® XL2902BK is compatible with both copper and aluminum conductors. LUTENE® XL2902BK was specifically developed to provide a super-smoothness surface yielding a more perfect interface between extruded shield and the insulation. As a result, significantly improved cable performance can be expected. LUTENE® XL2902BK has stable volume resistivity characteristics at elevated temperature. Applications Excellent-smoothness extra clean semi-conductive compound for conductor and bonded insulation shielding of high and extra high voltage power cable Characteristics - Excellent Surface Smoothness - Excellent Electrical Properties - Excellent Physical and Thermal Properties - Long-run Extrusion without Scorch - Contaminant Free Specification LUTENE® XL2902BK meets the property requirement of the following material specifications. - AEIC CS8 - AEIC CS7-96 - IEC 60502, 60840, 62067 - ICEA S-94-649, S-66-524 / NEMA WC74

Description LUTENE® XL8080NR is a standard version having excellent electrical properties for low and medium voltage power cable insulation. LUTENE® XL8080NR provides excellent surface finish and outstanding output rates over a broad range of conditions. Applications Cross-linkable polyethylene compound for low and medium voltage power cable insulation with rated voltage up to 11kV Specification LUTENE® XL8080NR meets the property requirement of the following material specifications. - AEIC CS8 - ICEA S-94-649 - KSC 3611 - IEC 60502

Description LUTENE® XL8080NRS is a standard version having excellent electrical properties for low and medium voltage power cable insulation. LUTENE® XL8080NRS provides excellent surface finish and outstanding output rates over a broad range of conditions. Applications Cross-linkable polyethylene compound for low medium voltage power cable insulation with rated voltage up to 11kV Specification LUTENE® XL8080NRS meets the property requirement of the following material specifications. - AEIC CS8 - AEIC CS8 ICEA S-94-649 - KSC 3611 - IEC 60502

Description LUTENE® XL8080NT is a standard version having excellent electrical properties for medium voltage power cable insulation and has a very low level of contamination. LUTENE® XL8080NT provides excellent surface finish and outstanding output rates over a broad range of conditions. Applications Cross-linkable polyethylene compound for medium voltage power cable insulation with rated voltage up to 36kV. Specification LUTENE® XL8080NT meets the property requirement of the following material specifications. - ICEA S-94-649 - AEIC CS8 - KSC 3611 - IEC 60502 - BS 6622

Description LUTENE® XL8080NTS is a standard version having excellent electrical properties for medium voltage power cable insulation and has a very low level of contamination. LUTENE® XL8080NTS provides excellent surface finish and outstanding output rates over a broad range of conditions. Applications Cross-linkable polyethylene compound for medium voltage power cable insulation with rated voltage up to 36kV. Specification LUTENE® XL8080NTS meets the property requirement of the following material specifications. - ICEA S-94-649 - AEIC CS8 - KSC 3611 - IEC 60502 - BS 6622

Description LUTENE® XL8080TR has excellent electrical properties for medium voltage power cable insulation and especially it shows improved water tree resistance and has thermal aging property. Applications Cross-linkable polyethylene compound for water tree retardant medium voltage power cable insulation with rated voltage up to 36kV. Specification LUTENE® XL8080TR meets the property requirement of the following material specifications. - AEIC CS8 - ICEA S-94-649, S-93-639 / NEMA WC74 - IEC 60502 - CENELEC HD620 - BS 6622

Description LUTENE® XL8080UCS is a superior cleanliness version for high and extra high voltage power cable insulation and is designated as UC (Ultra-Clean) due to its extremely low level of contamination. Applications Cross-linkable polyethylene compound for high and extra high voltage power cable insulation with rated voltage up to 230kV Specification LUTENE® XL8080UCS meets the property requirement of the following material specifications. - AEIC CS9 - AEIC CS8 - KSC 3611 - ICEA S-94-649 - IEC 60502 - IEC 60840 - IEC 62067

Description LUTENE® XL9090NT is a standard version having an enhanced cross-linking property for medium voltage power cable insulation and having an enhanced degree of scorch retardance. It has been designed to have a low level of additive sweat-out while maintaining the polyethylene's excellent electrical properties. Applications Rapid cure insulation compound for MV power cables with rated voltage up to 36kV. Specification LUTENE® XL9090NT meets the property requirement of the following material specifications. - ICEA S-94-649 - AEIC CS8 - KSC 3611 - IEC 60502

Petrothene YR92126 is a thermoplastic polyolefin-based, semiconductive, deformation resistant, black compound. YR92126 is selected by customers for use as shielding and jacketing for medium voltage power cable. When properly extruded, cables produced with YR92126 will meet the requirements of AEIC CS 5-82 and ICEA S-66-524. Antioxidant has been added to ensure thermal stability during processing and enhance product performance.

Low density, moisture curable polyethylene compound for 125°C/150°C appliance wire and coil-lead wire applications. PEXIDAN® H/T is a low density flame-retardant XLPE system curable by moisture and consists of a silane pre-grafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-012FR. Mixed and extruded in the proper proportions (67/33) this mixture results in a material curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® H/T is listed with CSA for AWM and CL1251, CL1252 & CL1503, and for UL AWM styles 3173 and 3321. See below for a more complete list of suitable AWM styles. PEXIDAN® H/T is halogenated but is RoHS-compliant.

Low density moisture curable polyethylene compound for SAE J1128 Automotive wire applications. PEXIDAN® J/T is a low density flame-retardant XLPE system curable by moisture and consists of a silane pre-grafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-012FR. Mixed and extruded in the proper proportions (60:40), the two components result in a material that is curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® J/T is designed to meet SAE J1128 standards for GXL, TXL and SXL type insulation. PEXIDAN® J/T is halogenated but is RoHS-compliant.

Low density, moisture curable, polyethylene compound for low voltage building wire insulation (CSA RW-90, RWU-90, AC-90, TECK-90). PEXIDAN® R/T is a low density XLPE system curable by moisture and consists of a silane pre-grafted base compound A-3001 and a catalyst masterbatch CAT-009. Mixed in the proper proportions (95/5) the two components result in a material that is curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® R/T is listed with the Canadian Standards Association for use in RW-90 and RWU-90 XLPE applications and rated to -40°C. PEXIDAN® R/T is non-flame-retardant, halogen-free and RoHS-compliant.

Low density, moisture curable polyethylene compound, for low voltage building wire insulation (CSA RW90, RWU90, AC90, TECK90 - Sunlight Resistant). PEXIDAN® R/T-UV2 is a low density XLPE system curable by moisture and consists of a silane pre-grafted base compound A-3001 and a catalyst masterbatch CAT-288UV. Mixed and extruded in the proper proportions (95:5), the two-component blend results in a material that is curable by exposure to 70-95°C hot water or even ambient moisture. Insulation made with PEXIDAN® R/T-UV2 is rated to -40°C and may be marked Sunlight Resistant ("- SR") in all colors and in all sizes per CSA C22.2 No. 38. PEXIDAN® R/T-UV2 is suitable for CSA Type RPV90 and RPVU90 photovoltaic wire per C22.2 No. 271. PEXIDAN® R/T-UV2 is non-flame retardant, halogen free, and RoHS-compliant.

Low density moisture curable polyethylene compound for low voltage underground service entrance cables (UL styles USE / USE-2 and Secondary URD). PEXIDAN® U/T is a low density XLPE system curable by moisture and consists of a silane pre-grafted base compound A-3001 and a catalyst masterbatch CAT-008. When mixed and extruded in the proper proportions (95/5), the two components result in a material curable by exposure to 70-95°C hot water or even ambient moisture. In order to prevent pre-scorching, the grafted compound and the catalyst masterbatch must be stored separately and mixed only when used. PEXIDAN® U/T is RoHS-compliant. PEXIDAN® U/T is also suitable for medium voltage XLPE jacket applications not requiring flame retardancy.

Low density, moisture curable polyethylene system, for low voltage building wire, control cable and cable tray applications (UL styles SIS, XHH, XHHW, XHHW-2, RHH, RHW, and RHW-2 VW-1). Also CSA listed for RW-90 and CIC (-40°C rated). PEXIDAN® V/T is a low density flame-retardant XLPE system curable by moisture and consists of a silane-grafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-010FR. Mixed and extruded in the proper proportions (50/50), the two components result in a material that is curable by exposure to hot water. PEXIDAN® V/T is halogenated but is RoHS-compliant.

Low Density, Moisture Curable Polyethylene Compound, for Low Voltage Building Wire, Control Cable and Cable Tray Applications (UL Styles SIS, XHH, XHHW, XHHW-2, RHH, RHW, and RHW-2 VW-1). Also CSA listed for RW-90 and CIC (-40C rated). PEXIDAN® V/T-2 is a low density flame-retardant XLPE system curable by moisture and consists of a silane-grafted base compound A-3001 and a catalyst masterbatch CAT-045FR. Mixed and extruded in the proper proportions (50/50), the two components result in a material that is curable by exposure to hot water. PEXIDAN® V/T-2 is halogenated but is RoHS-compliant.

Low density, moisture curable polyethylene, for low voltage building wire, control cable, photovoltaic and cable tray applications (UL styles SIS, XHHW, XHHW-2, RHW, RHW-2, PV VW-1; ‘SUNRES' and -40°C). PEXIDAN® V/T-2UV is a low density flame retardant XLPE system, curable by moisture and consists of a silane grafted base compound A-3001 and a catalyst masterbatch CAT-083FR-UV. Mixed and extruded in the proper proportions (50/50), the two components result in a material that is curable by exposure to hot water. PEXIDAN® V/T-2UV is halogenated but is RoHS-compliant. Insulation made with this system may be marked SUNRES or ‘SR' in all colors and in all sizes per UL44, UL4703 and CSA C22.2 #38. This product is also CSA-listed for RW90, RWU90, RPV90 RPVU90 and CIC, ‘SR' and -40C rated.