Phenolic Typical Properties Generic Phenolic - Organic Filler

Product Description
This data represents typical values that have been calculated from all products classified as: Generic Phenolic - Organic Filler

This information is provided for comparative purposes only.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Organic
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
1.36 to 1.44
 
ASTM D792
73°F
1.38 to 1.72
g/cm³
ISO 1183
Apparent Density
0.52 to 0.65
g/cm³
ASTM D1895
Molding Shrinkage
     
Flow : 73°F
0.0026 to 0.011
in/in
ASTM D955
73°F
0.43 to 0.70
%
ISO 294-4
Water Absorption (73°F, 24 hr)
0.28 to 0.48
%
ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
1.06E+6 to 1.36E+6
psi
ASTM D638
Tensile Strength (73°F)
4930 to 9060
psi
ASTM D638
Tensile Elongation (Break, 73°F)
0.59 to 0.91
%
ASTM D638
Flexural Modulus (73°F)
893000 to 1.27E+6
psi
ASTM D790
Flexural Strength
     
73°F
9440 to 14100
psi
ASTM D790
73°F
10200 to 18500
psi
ISO 178
Compressive Strength (73°F)
25400 to 31500
psi
ASTM D695
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
0.333 to 0.377
ft·lb/in
ASTM D256
Notched Izod Impact (73°F)
0.28 to 0.45
ft·lb/in
ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (73°F)
68 to 110
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
264 psi, Unannealed
298 to 370
°F
ASTM D648
264 psi, Unannealed
239 to 390
°F
ISO 75-2/A
Continuous Use Temperature
362 to 406
°F
ASTM D794
CLTE - Flow
0.000012 to 0.000039
in/in/°F
ASTM E831
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity (73°F)
6.4E+10 to 2.1E+12
ohm·cm
ASTM D257
Dielectric Strength (73°F)
180 to 400
V/mil
ASTM D149
Dielectric Constant (73°F)
4.47 to 6.16
 
ASTM D150
Dissipation Factor (73°F)
0.038 to 0.061
 
ASTM D150
Arc Resistance
120 to 144
sec
ASTM D495
Comparative Tracking Index (CTI)
150 to 175
V
UL 746
Flammability
Nominal Value
Unit
Test Method
Oxygen Index
24 to 29
%
ASTM D2863
Injection
Nominal Value
Unit
 
Rear Temperature
140 to 165
°F
 
Processing (Melt) Temp
225 to 229
°F
 
Mold Temperature
343 to 347
°F
 
Injection Pressure
1250 to 25400
psi
 
Back Pressure
29.0 to 64.5
psi
 
Screw Speed
60
rpm
 
Injection Notes
This data represents typical values that have been calculated from all products classified as: Generic Phenolic - Organic Filler

This information is provided for comparative purposes only.
Notes
1Typical properties: these are not to be construed as specifications.