Polyethylene (PE) Typical Properties Generic mLLDPE

Product Description
This data represents typical values that have been calculated from all products classified as: Generic mLLDPE

This information is provided for comparative purposes only.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Physical
Nominal Value
Unit
Test Method
Density
     
73°F
0,918 to 0,926
g/cm³
ISO 1183
--
0,916 to 0,918
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR)
     
190°C/2.16 kg
0,97 to 1,5
g/10 min
ASTM D1238
190°C/0.325 kg
1,2 to 2,0
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
0,19 to 0,31
 
ASTM D1894
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
0,75 to 1,1
mil
 
Secant Modulus
     
MD
21900 to 27800
psi
ASTM D882
TD
18000 to 30100
psi
ASTM D882
73°F
17000 to 39200
psi
ISO 527-3
Tensile Strength
     
MD : Yield
1280 to 1970
psi
ASTM D882
TD : Yield
1380 to 1500
psi
ASTM D882
Yield, 73°F
1310 to 1890
psi
ISO 527-3
MD : Break
6020 to 9800
psi
ASTM D882
TD : Break
6100 to 8600
psi
ASTM D882
Break, 73°F
7090 to 9480
psi
ISO 527-3
Tensile Elongation
     
MD : Break
440 to 480
%
ASTM D882
TD : Break
530 to 610
%
ASTM D882
Break, 73°F
540 to 700
%
ISO 527-3
Dart Drop Impact (73°F)
170 to 1100
g
ASTM D1709
Elmendorf Tear Strength
    ASTM D1922
MD
4,4 to 230
g
 
TD
8,5 to 570
g
 
Optical
Nominal Value
Unit
Test Method
Gloss
45 to 131
 
ASTM D2457
Haze
3,4 to 17
%
ASTM D1003
Extrusion
Nominal Value
Unit
 
Melt Temperature
379 to 427
°F
 
Extrusion Notes
This data represents typical values that have been calculated from all products classified as: Generic mLLDPE

This information is provided for comparative purposes only.
Notes
1Typical properties: these are not to be construed as specifications.