Kommerziell: Aktiv

E121562 - SABIC INNOVATIVE PLASTICS US L L C

Dokument herunterladen

Lateinamerika, Nordamerika

Additive Manufacturing (3D Printing)

FORD WSK-M4D697-A1

• Coefficient of Thermal Expansion vs. Temperature (ASTM E831)
• Elastic Modulus vs. Temperature (ASTM D4065)
• Flexural DMA (ASTM D5023)
• Instrumented Impact (Energy) (ASTM D3763)
• Instrumented Impact (Load) (ASTM D3763)
• Shear DMA (ASTM D4065)
• Specific Heat vs. Temperature (ASTM E1269)
• Specific Volume vs. Temperature (PVT)
• Tensile Creep (ASTM D2990)
• Tensile Fatigue
• Tensile Stress vs. Strain (ASTM D638)
• Thermal Conductivity vs. Temperature (ASTM E1530)
• Viscosity vs. Shear Rate (ASTM D3835)

Also Available In, Density / Specific Gravity, Melt Mass-Flow Rate (MFR), Melt Volume-Flow Rate (MVR), Molding Shrinkage, Tensile Modulus, Tensile Modulus, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Elongation at Yield, Tensile Strain at Yield, Tensile Elongation at Break, Tensile Strain at Break, Flexural Modulus, Flexural Modulus, Flexural Stress, Flexural Strength at Yield, Notched Izod Impact, Notched Izod Impact Strength, Instrumented Dart Impact, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, Vicat Softening Temperature, CLTE, Flow (TMA), RTI Elec, RTI Imp, RTI Str, Comparative Tracking Index (CTI), High Amp Arc Ignition (HAI), Hot-wire Ignition (HWI), Flame Rating, Drying Temperature, Drying Time, Suggested Max Moisture, Suggested Shot Size, Hopper Temperature, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Back Pressure, Screw Speed, Vent Depth, Injection Notes