| Product Description | ||||
|
FN 060C is a HCPP copolymer characterised by high impact strength combined with high stiffness and good flow properties.
The product is available in natural (FNC 060) but other colours can be supplied on request. APPLICATIONS FN 060C has been developed especially for demanding applications intended for injection moulding of automotive interior and appliances parts. |
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Appearance
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ISO 1183 |
|
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
|
|
g/10 min
|
ISO 1133 |
|
Molding Shrinkage - Flow (73°F)
|
|
%
|
ISO 294-4 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Modulus (73°F, Injection Molded)
|
|
psi
|
ISO 527-2 |
|
Tensile Stress (Yield, 73°F, Injection Molded)
|
|
psi
|
ISO 527-2/50 |
|
Tensile Strain (Yield, 73°F, Injection Molded)
|
|
%
|
ISO 527-2/50 |
|
Flexural Modulus (73°F, Injection Molded)
|
|
psi
|
ISO 178 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Charpy Notched Impact Strength
|
ISO 179/1eA | ||
|
-4°F, Injection Molded
|
|
ft·lb/in²
|
|
|
73°F, Injection Molded
|
|
ft·lb/in²
|
|
|
Charpy Unnotched Impact Strength
|
ISO 179/1eU | ||
|
-4°F, Injection Molded
|
|
ft·lb/in²
|
|
|
73°F, Injection Molded
|
|
ft·lb/in²
|
|
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Ball Indentation Hardness (H 358/30)
|
|
psi
|
ISO 2039-1 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Heat Deflection Temperature
|
|||
|
66 psi, Unannealed
|
|
°F
|
ISO 75-2/B |
|
264 psi, Unannealed
|
|
°F
|
ISO 75-2/A |
|
Vicat Softening Temperature
|
|||
|
--
|
|
°F
|
ISO 306/A |
|
--
|
|
°F
|
ISO 306/B |
| Additional Information | |||
|
Fogging, DIN 75201, 100°C/16h: 1.4 mg
Emission, VDA 277: 30 µg C/g |
|||
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris FN 060C, AD majoris , ADmajorisFN060C, ADmajoris, majorisFN 060 C, majorisFN 060C, majorisFN060, majoris, FN 060 C, majorisFN060C, FN 060C, FN060, 060C, FN060C, Polypropylene, High Crystallinity, Polypropylene High Crystallinity, PP, High Crystal, PP High Crystal, Polypropylene, PP, PolypropyleneHighCrystallinity, PPHighCrystal, 060FN, 060majorisFN
|
|||
| Features | |||
|
Features may also be described by the following terms: High Stiffness, High Strength, Good Flow.
|
|||
| Uses | |||
|
Uses may also be described by the following terms: Appliance Components, Appliance Parts.
|
|||
| Injection |
Nominal Value
|
Unit
|
|
|
Processing (Melt) Temp
|
|
°F
|
|
|
Mold Temperature
|
|
°F
|
|
|
Injection Rate
|
|
|
|
| Injection Notes | |||
|
Hold-on Pressure: 50 - 70% of the injection pressure
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |