Home > Plastics > Materials > UBE Nylon > UBE Nylon 5034 B - Datasheet

UBE Nylon 5034 B Datasheet

Polyamide 66/6 Copolymer

Supplied by UBE Engineering Plastics, S.A.

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Ube Nylon 5034B is a PA6/6.6 Copolyamide, produced by continuous polymerization process. It is a high viscosity grade suitable for numerous applications. The grade can be used for cast film and blown film (air cooled).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Low Slip
Features 
  • Food Contact Acceptable
  • Good Processability
  • High Viscosity
  • Low Slip
 
Uses 
  • Cast Film
  • Film
 
Agency Ratings 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Cast Film
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
    ASTM D1894
vs. Itself - Dynamic
 
 
vs. Itself - Static
 
 
Films
Nominal Value
Unit
Test Method
Secant Modulus - MD
psi
ASTM D882
Tensile Strength - MD
    ASTM D882
Yield
psi
 
Break
psi
 
Tensile Elongation - MD (Break)
%
ASTM D882
Thermal
Nominal Value
Unit
Test Method
Melting Temperature (DSC)
°F
ISO 3146
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
ASTM D257
Optical
Nominal Value
Unit
Test Method
Gardner Gloss
 
ASTM D523
Haze
%
ASTM D1003
Additional Information
The value listed as Melting Temperature, ISO 3146, was tested in accordance with ISO 11357.
The value listed as Surface Resistivity, ASTM D257, was tested in accordance with UBE test methods.
Coefficient of Friction, ASTM D1894, Dynamic: >1
Coefficient of Friction, ASTM D1894, Static: >1
Oxygen Permeability, ASTM D3985: 41.5 ml/m²/day
Relative Viscosity, JIS K6810, 96% H2SO4, conc. 1.0 g/100 ml: 4.08
Surface Resistivity, UBE Method: >1e15 ohm
Extractable Content, JIS K6810: <1.0 wt%
Molecular Ratio, PA6/PA6.6: 80/20
Water Vapor Permeability, JIS Z0208: 130 g/m²/day
Piercing Strength, JAS P1019: 950 N/mm
Piercing Elongation, JAS P1019: 14.5 mm
Flex Crack Resistance, MIL B131B, 23°C, 1000 cycle: <5 hole/0.04 m²
Gelbo Test, MIL B131B, 5°C, 100 cycle: <5 hole/0.04 m²
Generic Name
Generic Name may also be described by the following terms: PA666, PA66/6.
Features
Features may also be described by the following terms: Low Slip, High Viscosity, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Cast Film.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Available Documents
Processing - Extrusion (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.