Home > Plastics > Materials > Borstar® > Borstar® FB1350 - Datasheet

Borstar® FB1350 Datasheet

Medium Density Polyethylene

Supplied by Borealis AG

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Borstar FB1350 is a linear medium density polyethylene grade combining excellent extrusion properties with high film stiffness.

Borstar FB1350 is well suited for mono- and coextrusion of films produced with high neck or low neck extrusion.

Borstar FB1350 contains antioxidant.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • High Stiffness
  • Recyclable Material
Uses 
  • Bags
  • Blending
  • Film
  • Geo Membranes
  • Heavy-duty Bags
  • Packaging
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Extrusion
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR)
    ISO 1133
190°C/21.6 kg
g/10 min
 
190°C/5.0 kg
g/10 min
 
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
 
ISO 8295
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 
Tensile Modulus
    ISO 527-3
MD
psi
 
TD
psi
 
Tensile Strength
    ISO 527-3
MD
psi
 
TD
psi
 
Tensile Elongation
    ISO 527-3
MD : Break
%
 
TD : Break
%
 
Dart Drop Impact
g
ISO 7765-1
Elmendorf Tear Strength
    ISO 6383-2
MD
lbf/in
 
TD
lbf/in
 
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
ISO 11357-3
Optical
Nominal Value
Unit
Test Method
Gloss (20°)
 
ASTM D2457
Haze
%
ASTM D1003
Additional Information
Nominal Value
Unit
Test Method
Puncture Resistance - Energy to Resist
ft·lb/in
ISO 7765-2
Features
Features may also be described by the following terms: High Stiffness.
Uses
Uses may also be described by the following terms: Heavy-duty Bags, Heavy Duty Bags, Geomembranes, Geo Membranes.
Available Documents
Technical Datasheet (English)
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Extrusion Notes
Die Gap: 1.2 to 1.5 mm
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.