Home > Plastics > Materials > Alcryn® > Alcryn® 2165 TR - Datasheet

Alcryn® 2165 TR Data Sheet

Melt Processable Rubber

Supplied by Advanced Polymer Alloys

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Alcryn® 2165 TR is a Melt Processable Rubber (MPR) material. It is available in Asia Pacific, Europe, or North America.

Important attributes of Alcryn® 2165 TR are:
  • RoHS Compliant
  • WEEE Compliant
  • Chemical Resistant
  • Good Tear Strength
  • High Flow

Typical applications include:
  • Automotive
  • Engineering/Industrial Parts
  • Handles
  • Sealing Applications
  • Hose
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Tear Strength
  • High Flow
  • High Friction
Uses 
  • Automotive Interior Parts
  • Cable Jacketing
  • Gaskets
  • Handles
  • Hose
  • Seals
  • Tubing
  • Weatherstripping
  • Wire Jacketing
Agency Ratings 
RoHS Compliance 
Appearance 
  • Translucent
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     
100% Strain
psi
ASTM D412
100% Strain, 0.0748 in
psi
ISO 37
Tensile Strength (Break, 0.0748 in)
psi
ASTM D412, ISO 37
Tensile Elongation
     
Break
%
ASTM D412
Break, 0.0748 in
%
ISO 37
Tear Strength 2 (75°F)
lbf/in
ASTM D624
Compression Set
    ASTM D395, ISO 815
75°F, 22.0 hr
%
 
212°F, 22.0 hr
%
 
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A, 0.0748 in, Compression Molded)
 
ASTM D2240, ISO 868
Additional Information
The value listed as Specific Gravity, ASTM D792, was tested in accordance with ASTM D471.
The value listed as Density, ISO 1183, was tested in accordance with ISO 2781.
The value listed as Shore Hardness, ISO 868, was tested in accordance with ISO 48.
Permanent Set (Tension), ASTM D412, Compression Molding, 1.9 mm: 13%
100% Modulus, ASTM D412, ISO 37, Physical Retention After 7 Days at 125°C, Compression Molding, 1.9 mm: 109%
Tensile Strength, ASTM D412, ISO 37, DIN 53504, Physical Retention After 7 Days at 125°C, Compression Molding, 1.9 mm: 96%
Elongation At Break, ASTM D412, ISO 37, Physical Retention After 7 Days at 125°C, Compression Molding, 1.9 mm: 91%
Hardness, ISO 48, Physical Retention After 7 Days at 125°C, Shore A, Compression Molding, 1.9 mm: 60
Viscosity, ASTM D3835, 300 s-1 at 190°C, Compression Molding, 1.9 mm: 232 Pa*s
Typical Processing Temperature, Compression Molding, 1.9 mm: 177° C
Volume Change, ASTM D471, ISO 1817, After 7 days, 100°C, Water, Compression Molding, 1.9 mm: 7%
Volume Change, After 7 days,ASTM D471, ISO 1817, 24°C, Fuel B, Compression Molding, 1.9 mm: 19%
Volume Change, After 7 days, ASTM D471, ISO 1817, 100°C, ASTM #1 Oil, Compression Molding, 1.9 mm: -16%
Volume Change, After 7 days, ASTM D471, ISO 1817, 100°C, IRM 903 Oil #3, Compression Molding, 1.9 mm: 9%
Related Terminology
This supplier and product may also be known by these terms: APA, Advanced Polymer Alloys is a division of Ferro
Features
Features may also be described by the following terms: Good Abrasion Resistance, Abrasion Resistant, Good Chemical Resistance, Chemical Resistant, High Flow, High Melt, High MFI, High Friction, Good Tear Strength.
Uses
Uses may also be described by the following terms: Gaskets, Gasketing, Tubing, Tube.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Available Documents
Processing - Calendering (English)
Processing - Compression Molding (English)
Processing - Extrusion (English)
Processing - Extrusion Blow Molding (English)
Processing - Injection Molding (English)
Processing - Injection Molding Parameters (English)
Processing - Overmolding (English)
Technical Datasheet (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.