| General | |
|
Material Status
|
|
|
Availability
|
|
|
Forms
|
|
|
Processing Method
|
|
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ISO 1183 |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ISO 1133 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Stress
|
ISO 527-2 | ||
|
Yield
|
|
psi
|
|
|
Break
|
|
psi
|
|
|
Tensile Strain (Break)
|
|
%
|
ISO 527-2 |
|
Flexural Modulus
|
|
psi
|
ISO 178 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Shore Hardness (Shore D)
|
|
|
ISO 868 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Vicat Softening Temperature
|
|
°F
|
ISO 306 |
| Additional Information | |||
|
Most properties were tested according to JIS standards.
|
|||
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: ADTEX® DH4200, ADTEX DH4200, ADTEX® , ADTEX, ADTEXDH4200, DH 4200, DH4200, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Japan Polychem, PolyethyleneHighDensity, 4200DH
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |