Home > Plastics > Materials > INEOS PP > INEOS PP N05G-00 - Datasheet

INEOS PP N05G-00 Data Sheet

Polypropylene Impact Copolymer

Supplied by INEOS Olefins & Polymers USA

View Complete Data Sheet Search 96000+ Data Sheets
Create Your Free Account!
Product Description
Grade N05G-00 is a general purpose high impact copolymer polypropylene designed for injection molding applications. It offers a superior balance of stiffness and impact strength as compared to competitive impact copolymers of similar melt flow rate. This material meets the requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520.

Applications
  • Appliance
  • Automotive
  • Consumer Products
  • Rigid packaging
  • Housewares
  • Compounding

Benefits
  • Enhanced impact-to-stiffness balance
  • UL Recognized
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Food Contact Acceptable
  • General Purpose
  • Good Impact Resistance
  • Impact Copolymer
 
Uses 
  • Appliances
  • Automotive Applications
  • Compounding
  • Consumer Applications
  • Household Goods
  • Rigid Packaging
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Compounding
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 73°F, Injection Molded)
psi
ASTM D638
Tensile Elongation
    ASTM D638
Yield
%
 
Break
%
 
Flexural Modulus - 1% Secant (73°F, Injection Molded)
psi
ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
    ASTM D256
-4°F, 0.125 in
ft·lb/in
 
73°F, 0.125 in
 
 
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, Injection Molded)
°F
ASTM D648
Features
Features may also be described by the following terms: Impact Copolymer, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Household Goods, Housewares, Rigid Packaging, Compounding, Compounds.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Available Documents
Brochure - General data (English)
Processing - Injection Molding Tips (English)
Processing - Polypropylene (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.