Home > Plastics > Materials > Pro-fax > Pro-fax EP315J - Datasheet

Pro-fax EP315J Datasheet

Polypropylene Impact Copolymer

Supplied by LyondellBasell Industries

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Pro-fax EP315J low melt flow, electrical grade polypropylene copolymer resin has outstanding toughness, flex-life and abrasion resistance. This resin demonstrates good processing behavior and is tailored for trouble-free production of primary cable insulation, especially filled telephone cable because its unique stabilizer system resists extraction by petroleum-jelly base filling compounds.

Because of its ease of processing and resultant low operating pressures, Pro-fax EP315J resin keeps wire draw to a minimum and consequently has been the preferred resin for 24 and 26 AWG wire.

Typical applications include telephone singles and general primary insulation.

For regulatory compliance information see Pro-fax EP315J Product Stewardship Bulletin (PSB).
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Abrasion Resistance
  • Good Electrical Properties
  • Good Processability
  • High ESCR (Stress Crack Resist.)
  • Impact Copolymer
  • Low Density
  • Low Flow
  • Ultra High Toughness
Uses 
  • Communication Wire Insulation
  • Telephone Drop Wire Insulation
  • Wire & Cable Applications
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792B
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
ASTM D638
Tensile Elongation (Yield)
%
ASTM D638
Flexural Modulus - 1% Secant  3
psi
ASTM D790A
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
ASTM D746
Oxidation Induction Time (392°F)
min
ASTM D3895
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
ASTM D257
Dielectric Constant
    ASTM D150
100 kHz
 
 
1 MHz
 
 
Dissipation Factor
    ASTM D150
100 kHz
 
 
1 MHz
 
 
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel
Features
Features may also be described by the following terms: Low Flow, Low Melt, Low MFI, Ultra High Toughness, Good Abrasion Resistance, Abrasion Resistant, Impact Copolymer, Low Density, Low Specific Gravity, Good Electrical Properties, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Communication Wire Insulation, Telephone Drop Wire Insulation, Wire and Cable Applications, Wire & Cable Applications.
Available Documents
Processing - Extrusion (English)
Processing - Injection Molding (English)
Processing - Mold Shrink (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
22,0 in/min
30,050 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.