Home > Plastics > Materials > Daelim Po1y® > Daelim Po1y® TR-580 - Datasheet

Daelim Po1y® TR-580 Datasheet

High Density Polyethylene

Supplied by DAELIM INDUSTRIAL CO., LTD.

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Daelim Po1y® TR-580 is a High Density Polyethylene product. It can be processed by blow molding and is available in Asia Pacific. Applications of Daelim Po1y® TR-580 include containers and food contact applications.

Characteristics include:
  • Food Contact Acceptable
  • Good Processability
  • High ESCR (Stress Crack Resistant)
  • Impact Resistant
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • Good Processability
  • High ESCR (Stress Crack Resist.)
  • High Melt Stability
  • Ultra High Impact Resistance
Uses 
  • Drums
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Environmental Stress-Cracking Resistance (F50)
hr
ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
 
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
ASTM D746
Additional Information
Tensile Elongation @ Brk, ASTM D638: >600%
Brittle Temperature, ASTM D746: <-76°C
Related Terminology
This supplier and product may also be known by these terms: Daelim Poly, Daelim Po1y
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Ultra High Impact Resistance, High Melt Stability, Good Processability, Easy Processing.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), ASTM (1).
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.