Home > Plastics > Materials > ExxonMobil™ HDPE > ExxonMobil™ HDPE HD 6908 Series - Datasheet

ExxonMobil™ HDPE HD 6908 Series Datasheet

High Density Polyethylene Resin

Supplied by ExxonMobil Chemical

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account! or Login
Product Description
HD 6908 is a homopolymer with outstanding stiffness with a good balance of processability and cold temperature impact performance. This resin is ideally suited for articles requiring very high stiffness or enable down-gauging. This material offers excellent performance in structural foam articles.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • HD 6908.19: Antioxidant
  • HD 6908.65: Antioxidant; UV Stabilizer
 
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Environmental Stress-Cracking Resistance (10% Igepal, F50)
hr
ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
ASTM D638
Flexural Modulus
    ASTM D790B
1% Secant
psi
 
2% Secant
psi
 
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (-40°F)
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
66 psi, Unannealed
°F
ASTM D648
264 psi, Unannealed
°F
ASTM D648B
Peak Melting Temperature
°F
ASTM D3418
Additional Information
  • Properties are based on compression molded samples.
  • Test procedures may be modified to accommodate operating conditions or facility limitations.
  • Tensile Strength at Yield and Elongation at Break tested using ASTM D638 Type IV, 50 mm/min.
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES
Available Documents
Technical Datasheet
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.