| Product Description | ||||
|
Menzolit® MMC 1600 is a mineral moulding compound based on unsaturated polyester resin. The product is glass fibre reinforced and contains mineral fillers. In case of fire the product doesn't melt, neither does it form droplets nor is smoke generation excessive. The material is compression moulded in heated steel moulds. It is must to work with chrome plated moulds. The product contains no halogens.
Menzolit® MMC 1600 is a mineral moulding compound (similar to DMC/BMC) providing of a stone like appearance eg. granite or marble. Chrome plated mould surfaces are required. It is recommended that product thickness is not less than 3mm. |
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Filler / Reinforcement
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Appearance
|
|
|||
|
Processing Method
|
|
|||
|
Part Marking Code (ISO 11469)
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ISO 1183 |
|
Molding Shrinkage
|
|
%
|
ISO 2577 |
|
Water Absorption (Saturation, 73°F)
|
|
%
|
ISO 62 |
|
Post Shrinkage
|
|
%
|
DIN 53464 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Modulus (Compression Molded)
|
|
psi
|
ISO 527-2 |
|
Tensile Stress (Yield, Compression Molded)
|
|
psi
|
ISO 527-2 |
|
Flexural Modulus (Compression Molded)
|
|
psi
|
ISO 178 |
|
Flexural Strength (Compression Molded)
|
|
psi
|
ISO 178 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Charpy Notched Impact Strength (Compression Molded)
|
|
ft·lb/in²
|
ISO 179 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Heat Deflection Temperature (264 psi, Unannealed)
|
|
°F
|
ISO 75-2/A |
|
Glass Transition Temperature (DSC)
|
|
°F
|
DSC |
|
CLTE - Flow
|
|
in/in/°F
|
ISO 11359-2 |
|
Continuous Use Temperature
|
|
°F
|
Internal Method |
| Electrical |
Nominal Value
|
Unit
|
Test Method
|
|
Surface Resistivity
|
|
ohm
|
IEC 60093 |
|
Volume Resistivity
|
|
ohm·cm
|
IEC 60093 |
|
Comparative Tracking Index
|
|
V
|
IEC 60112 |
| Flammability |
Nominal Value
|
Unit
|
Test Method
|
|
Flame Rating (0.118 in)
|
|
|
UL 94 |
|
Glow Wire Ignition Temperature
|
|
°F
|
IEC 60695-2-13 |
|
Oxygen Index
|
|
%
|
ISO 4589-2 |
| Additional Information |
Nominal Value
|
Unit
|
Test Method
|
|
Glow Bar
|
|
|
IEC 60707-3 |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Menzolit® MMC 1600, Menzolit MMC 1600, Menzolit® , Menzolit, MenzolitMMC1600, MMC 1600, MMC1600, Polyester, Thermoset, Polyester Thermoset, Polyester, TS, Polyester TS, Thermoset, TS, PolyesterThermoset, PolyesterTS, 1600MMC
|
|||
| Features | |||
|
Features may also be described by the following terms: Low Smoke Emission, Zero Halogen Content, Halogen Free, High Heat Resistance.
|
|||
| Injection |
Nominal Value
|
Unit
|
|
|
Mold Temperature
|
|
°F
|
|
|
Injection Pressure
|
|
psi
|
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |