Home > Plastics > Materials > Menzolit® > Menzolit® CIC 0180 - Datasheet

Menzolit® CIC 0180 Data Sheet

Thermoset Polyester

28% Glass\Mineral

Supplied by Menzolit Ltd (UK)

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Menzolit® CIC 0180 is a DMC/BMC (CIC = continues impregnated compound) like material. High strength material for electrical applications like switch gear equipment. Similar to BMC 0180. UL approval available on request.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass\Mineral, 28% Filler by Weight
Features 
  • Halogen Free
  • High Heat Resistance
  • High Strength
  • Low Smoke Emission
 
Uses 
  • Electrical/Electronic Applications
Appearance 
  • Colors Available
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Part Marking Code (ISO 11469)
  • >UP-(MD+GF)65FR(60)<
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Molding Shrinkage
%
ISO 294-4
Water Absorption (Saturation, 73°F)
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Compression Molded)
psi
ISO 527-2
Tensile Stress (Yield, Compression Molded)
psi
ISO 527-2
Flexural Modulus (Compression Molded)
psi
ISO 178
Flexural Strength (Compression Molded)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (Compression Molded)
ft·lb/in²
ISO 179
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature
°F
DSC
CLTE - Flow
in/in/°F
ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
IEC 60093
Volume Resistivity
ohm·cm
IEC 60093
Comparative Tracking Index
V
IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0.118 in)
 
UL 94
Glow Wire Ignition Temperature
°F
IEC 60695-2-13
Oxygen Index
%
ISO 4589-2
Additional Information
Shrinkage, ISO 2577: 0.03%
Post Moulding Shrinkage, DIN 53464: 0%
Heat Distortion Temperature, EN ISO 75-2: >150°C
Continuous Service Temperature, Menzolit Method: 170°C
Glow Bar, IEC 60707-3: BH2 <= 95
Features
Features may also be described by the following terms: Low Smoke Emission, Zero Halogen Content, Halogen Free, High Strength, High Heat Resistance.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.