| Product Description | ||||
|
Menzolit® BMC 0800 is a bulk moulding compound based on unsaturated polyester resin. The product is glass fibre reinforced and contains mineral fillers. In case of fire the product doesn't melt, neither does it form droplets nor is smoke generation excessive. The material is injection moulded in heated steel moulds. It is recommended to work with chrome plated tools. The product contains no halogens.
Menzolit® BMC 0800 is a special SMC for applications within household and kitchenware. The glass level has been selected to combine good mould ability with good strength and stiffness properties. The product shows good resistance to food chemicals, cleaning detergents, water and mechanical abrasion. Typical applications are trays and components for dishwashing and food processing machinery. |
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Filler / Reinforcement
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Appearance
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
|||
|
Part Marking Code (ISO 11469)
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ISO 1183 |
|
Molding Shrinkage
|
|||
|
--
|
|
%
|
ISO 2577 |
|
-- 2
|
|
%
|
DIN 53464 |
|
Water Absorption (Saturation, 73°F)
|
|
%
|
ISO 62 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Modulus (Compression Molded)
|
|
psi
|
ISO 527-2 |
|
Tensile Stress (Yield, Compression Molded)
|
|
psi
|
ISO 527-2 |
|
Flexural Modulus (Compression Molded)
|
|
psi
|
ISO 178 |
|
Flexural Strength (Compression Molded)
|
|
psi
|
ISO 178 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Charpy Notched Impact Strength (Compression Molded)
|
|
ft·lb/in²
|
ISO 179 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Heat Deflection Temperature (264 psi, Unannealed)
|
|
°F
|
ISO 75-2/A |
|
Max. Continuous Use Temperature
|
|
°F
|
Internal Method |
|
Glass Transition Temperature (DSC)
|
|
°F
|
DSC |
|
CLTE - Flow
|
|
in/in/°F
|
ISO 11359-2 |
| Electrical |
Nominal Value
|
Unit
|
Test Method
|
|
Surface Resistivity
|
|
ohm
|
IEC 60093 |
|
Volume Resistivity
|
|
ohm·cm
|
IEC 60093 |
|
Comparative Tracking Index
|
|
V
|
IEC 60112 |
| Flammability |
Nominal Value
|
Unit
|
Test Method
|
|
Flame Rating (0.118 in)
|
|
|
UL 94 |
|
Glow Wire Ignition Temperature
|
|
°F
|
IEC 60695-2-13 |
|
Oxygen Index
|
|
%
|
ISO 4589-2 |
| Additional Information |
Nominal Value
|
Unit
|
Test Method
|
|
Glow Bar
|
|
|
IEC 60707-3 |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Menzolit® BMC 0900, Menzolit BMC 0900, Menzolit® , Menzolit, MenzolitBMC0900, BMC 0900, BMC0900, Polyester, Thermoset, Polyester Thermoset, Polyester, TS, Polyester TS, Thermoset, TS, PolyesterThermoset, PolyesterTS, 0900BMC
|
|||
| Features | |||
|
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Low Smoke Emission, Zero Halogen Content, Halogen Free, High Heat Resistance, Good Strength, Good Stiffness, Good Moldability.
|
|||
| Uses | |||
|
Uses may also be described by the following terms: Housings, Housing.
|
|||
| Injection |
Nominal Value
|
Unit
|
|
|
Mold Temperature
|
|
°F
|
|
|
Injection Pressure
|
|
psi
|
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
| 2Post Molding Shrinkage |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |