IDES Prospector Already have an account? Login Here

Menzolit® BIO-BMC Data Sheet

Thermoset Polyester

Supplied by Menzolit Ltd (UK)

Home > Plastics > Menzolit® > Menzolit® BIO-BMC Data Sheet
View Complete Data Sheet
Search 85000+ Data Sheets
Create Free Account
Product Description
Menzolit® BIO-BMC is a general purpose BMC based on renewable raw materials. Since it is experimental and still in its very early product life experince is limited. For more information please contact our R&D departement.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • General Purpose
  • Halogen Free
  • High Heat Resistance
  • Low Smoke Emission
  • Renewable Resource Content
Uses 
  • General Purpose
Appearance 
  • Colors Available
Forms 
  • Pellets
Processing Method 
  • Compression Molding
  • Injection Molding
  
Part Marking Code (ISO 11469)
  • >UP-(SD50+LF10)<
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage
%
 ISO 294-4
Water Absorption (Saturation, 73°F)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus (Compression Molded)
psi
 ISO 178
Flexural Strength (Compression Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (Compression Molded)
ft·lb/in²
 ISO 179
Flammability
Nominal Value
Unit
Test Method
Oxygen Index
%
 ISO 4589-2
Additional Information
Shrinkage, ISO 2577: 0.37%
Post Moulding Shrinkage, DIN 53464: 0%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Menzolit® BIO-BMC, Menzolit BIOBMC, Menzolit® , Menzolit, MenzolitBIOBMC, BIO, BIO-BMC, BIOBMC, BIO:BMC, BIO/BMC, BIO+BMC, BIO_BMC, BIO BMC, Polyester, Thermoset, Polyester Thermoset, Polyester, TS, Polyester TS, Thermoset, TS, PolyesterThermoset, PolyesterTS, BMCBIO
Features
Features may also be described by the following terms: Low Smoke Emission, Zero Halogen Content, Halogen Free, High Heat Resistance, Renewable Resources, From Renewable Resources, Renewable Resource Derived, Renewable Raw Materials, Renewable Resource Content.
Injection
Nominal Value
Unit
 
Mold Temperature
°F
  
Injection Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.