| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Filler / Reinforcement
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ISO 1183 |
|
Molding Shrinkage - Flow
|
|
%
|
ISO 294-4 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Stress (Yield)
|
|
psi
|
ISO 527-2 |
|
Tensile Strain (Break)
|
|
%
|
ISO 527-2 |
|
Flexural Modulus
|
|
psi
|
ISO 178 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Notched Izod Impact Strength
|
|
ft·lb/in²
|
ISO 180/A |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Heat Deflection Temperature (66 psi, Unannealed)
|
|
°F
|
ISO 75-2/B |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ecomass® 4450CI86, Ecomass 4450CI86, Ecomass® , Ecomass, Ecomass4450CI86, 4450 CI 86, 4450CI86, 4450CI, CI86, Polypropylene Random Copolymer, PP Random Copolymer, Polypropylene, PP, PolypropyleneRandomCopolymer, PPRandomCopolymer, CI4450
|
|||
| Features | |||
|
Features may also be described by the following terms: Random Copolymer, Good Toughness, Tough, Medium Rigidity, Good Rigidity, High Specific Gravity, High Density, Non-Toxic, Non Toxic, Toxicity None.
|
|||
| Injection |
Nominal Value
|
Unit
|
|
|
Processing (Melt) Temp
|
|
°F
|
|
|
Mold Temperature
|
|
°F
|
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |