Home > Plastics > Materials > Idemitsu PS > Idemitsu PS MS500 - Datasheet

Idemitsu PS MS500 Datasheet

General Purpose Polystyrene

Supplied by Idemitsu PS

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Idemitsu PS MS500 is a General Purpose Polystyrene product. It can be processed by extrusion or injection molding and is available in Asia Pacific. Primary characteristic: flame rated.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Processing Method 
  • Extrusion
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength
ft·lb/in²
ISO 179
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ISO 306
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0.0591 in)
 
UL 94
Available Documents
Processing - Idemitsu PS (English)
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Mold Temperature
°F
 
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Die Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.